Melola Discovery

← Melola Discovery

Akses terbuka Jurnal SINTA 1

Influence of Solvothermal Temperatures and Times on Crystallinity and Morphology of MOF-5

Indonesian Journal of Chemistry · Vol. 15 No. 2 (2015) · hlm. 101–107

DOI
10.22146/ijc.21202
ISSN
1411-9420, 2460-1578
Terbit
2015-07-13
Penerbit
Gadjah Mada University
Bahasa
en
Lisensi
creativecommons.org/licenses/by-nc-nd/4.0/

Abstrak

MOF-5 (metal-organic frameworks-5) have been synthesized using solvothermal method in which reaction mixtures of zinc nitrate hexahydrate and 1,4-benzenedicarboxylic acid (BDC) in dimethylformamide (DMF) were heated at various heating temperatures and times in order to observe the influence of heating temperature and time on crystallinity and morphology of the obtained MOF-5. The heating temperatures used were 105, 120 and 140 °C, respectively with heating times of 12–144 h. Determination of the best reaction conditionswas based on the observation of phase purity and crystal morphology of MOF-5 using XRD and SEM. The characterization results showed that MOF-5 crystals with a higher crystallinity were obtained when the reaction mixtures were heated at 105 °C for 144 h, 120 °C for 24 h or 140 °C for 12 h. The maximum weight of MOF-5 crystal was generated from reaction mixture heated at 120 °C for 72 h.

Kata kunci

Jaringan kolaborasi para penulis

29 penulis · 104 tautan kepenulisan bersama · 47 lintas organisasi

Arahkan kursor atau ketuk sebuah nama untuk menyorot rekan penulisnya. Klik dua kali untuk membuka halaman penulis.

  • Institut Teknologi Sepuluh Nopember
  • Universitas Trisakti
  • Institut Ilmu Kesehatan Bhakti Wiyata
  • Bandung Institute of Technology
  • University of Technology Malaysia
  • Sebelas Maret University
  • Mercu Buana University
  • Organisasi lain
  • Afiliasi tidak diketahui
  • Organisasi berbeda
  • Organisasi sama
  • Afiliasi tidak diketahui
  • Garis lebih tebal = lebih banyak artikel bersama · lingkaran lebih besar = lebih banyak artikel
Tampilkan sebagai tabel
Rekan penulisOrganisasiArtikel bersama
Didik PrasetyokoInstitut Teknologi Sepuluh Nopember4
Hamzah FansuriInstitut Teknologi Sepuluh Nopember3
Amirul MukmininInstitut Teknologi Sepuluh Nopember3
Djoko HartantoInstitut Teknologi Sepuluh Nopember2
Dety Oktavia SulistionoInstitut Teknologi Sepuluh Nopember2
Naimatul KhoirohInstitut Teknologi Sepuluh Nopember2
Indah IndahInstitut Ilmu Kesehatan Bhakti Wiyata1
Fery Eko PujionoInstitut Ilmu Kesehatan Bhakti Wiyata1
Hadi NurUniversity of Technology Malaysia1
Maria UlfaSebelas Maret University1
Zainab RamliUniversity of Technology Malaysia1
Subandrio SomaliUniversitas Trisakti1
Rita SundariMercu Buana University1
Wiwik DahaniUniversitas Trisakti1
Irfan MarwanzaUniversitas Trisakti1
Andriyani AndriyaniUniversitas Trisakti1
Khuzaimah Binti ArifinFuel Cell Institute1
Tri Esti PurbaningtiasIslamic University of Indonesia1
Cicik Herlina YuliantiAfiliasi tidak diketahui1
Yoshifumi ChisakiAfiliasi tidak diketahui1
Aishah Abdul JalilAfiliasi tidak diketahui1
Che Ku Nor Liana Che Ku HitamAfiliasi tidak diketahui1
Djulia OnggoBandung Institute of Technology1
Khairurrijal KhairurrijalBandung Institute of Technology1
Ismunandar IsmunandarBandung Institute of Technology1
Nurul WidiastutiInstitut Teknologi Sepuluh Nopember1

Afiliasi berasal dari OpenAlex; metadata OAI-PMH jurnal tidak memuatnya. Penulis tanpa ID OpenAlex dicocokkan berdasarkan nama, sehingga dua orang bisa tergabung atau satu orang bisa terpisah.

Sumber metadata: OpenAlex API (jurnal SINTA, ADR 0048) https://openalex.org/S2764840418, pertama di-harvest 19 Nov 2026, terakhir terlihat 19 Nov 2026.
Metadata asli (oai_dc)
<oai_dc:dc xmlns:dc="http://purl.org/dc/elements/1.1/" xmlns:oai_dc="http://www.openarchives.org/OAI/2.0/oai_dc/"><dc:title xml:lang="en">Influence of Solvothermal Temperatures and Times on Crystallinity and Morphology of MOF-5</dc:title><dc:creator>Tri Ana Mulyati</dc:creator><dc:creator>Ratna Ediati</dc:creator><dc:creator>Afifah Rosyidah</dc:creator><dc:subject>MOF-5</dc:subject><dc:subject>metal-organic frameworks</dc:subject><dc:subject>solvothermal synthesis</dc:subject><dc:subject>heating temperature</dc:subject><dc:subject>reaction time (chemistry)</dc:subject><dc:subject>crystallinity</dc:subject><dc:subject>crystal morphology</dc:subject><dc:subject>zinc nitrate</dc:subject><dc:subject>1,4-benzenedicarboxylic acid</dc:subject><dc:subject>dimethylformamide</dc:subject><dc:subject>phase purity</dc:subject><dc:description xml:lang="en">MOF-5 (metal-organic frameworks-5) have been synthesized using solvothermal method in which reaction mixtures of zinc nitrate hexahydrate and 1,4-benzenedicarboxylic acid (BDC) in dimethylformamide (DMF) were heated at various heating temperatures and times in order to observe the influence of heating temperature and time on crystallinity and morphology of the obtained MOF-5. The heating temperatures used were 105, 120 and 140 °C, respectively with heating times of 12–144 h. Determination of the best reaction conditionswas based on the observation of phase purity and crystal morphology of MOF-5 using XRD and SEM. The characterization results showed that MOF-5 crystals with a higher crystallinity were obtained when the reaction mixtures were heated at 105 °C for 144 h, 120 °C for 24 h or 140 °C for 12 h. The maximum weight of MOF-5 crystal was generated from reaction mixture heated at 120 °C for 72 h.</dc:description><dc:publisher>Gadjah Mada University</dc:publisher><dc:date>2015-07-13</dc:date><dc:type>info:eu-repo/semantics/article</dc:type><dc:identifier>https://doi.org/10.22146/ijc.21202</dc:identifier><dc:identifier>10.22146/ijc.21202</dc:identifier><dc:source>Indonesian Journal of Chemistry; Vol 15 No 2 (2015); 101-107</dc:source><dc:source>1411-9420</dc:source><dc:source>2460-1578</dc:source><dc:language>en</dc:language><dc:rights>https://creativecommons.org/licenses/by-nc-nd/4.0/</dc:rights></oai_dc:dc>