Melola Discovery

← Melola Discovery

Akses terbuka Jurnal SINTA 1

Influence of LLDPE-g-MA on Mechanical Properties, Degradation Performance and Water Absorption of Thermoplastic Sago Starch Blends

Indonesian Journal of Chemistry · Vol. 22 No. 1 (2022) · hlm. 171–171

DOI
10.22146/ijc.68558
ISSN
1411-9420, 2460-1578
Terbit
2022-01-04
Penerbit
Gadjah Mada University
Bahasa
en
Lisensi
creativecommons.org/licenses/by-nc-nd/4.0/

Abstrak

The addition of LLDPE-g-MA into the compound of sago starch/LLDPE was studied to improve its mechanical, morphology, degradation performance, and water absorption properties. Thermoplastic Sago Starch was composed of a mixture of sago starch and glycerol. LLDPE-g-MA was prepared in varied concentrations based on the weight of TPSS (0, 6, 8, 10, and 14 wt.%) by reacting LLDPE, maleic anhydride, and benzoyl peroxide using an internal mixer. The results showed an increase in values obtained from mechanical tests, i.e., tensile strength was improved from 0.6902 to 3.6187 N/mm2 with the addition of LLDPE-g-MA at 10 wt.%. The addition also resulted in a 1.44% increment in elongation at break and 251 N/mm2 for Young's Modulus. The surface morphology of the sample demonstrated an excellent interfacial adhesion reaction or LLDPE dispersion over the entire surface of the matrix (starch). The water absorption test continued to decrease with the increase in the LLDPE-g-MA concentration from 53 wt.% (without LLDPE-g-MA) to 14 wt.% at 10 wt.% LLDPE-g-MA concentration. The degradation performance showed that the sample could be degraded under all three conditions for up to 30 days.

Kata kunci

Jaringan kolaborasi para penulis

40 penulis · 123 tautan kepenulisan bersama · 37 lintas organisasi · menampilkan 40 yang paling banyak terhubung

Arahkan kursor atau ketuk sebuah nama untuk menyorot rekan penulisnya. Klik dua kali untuk membuka halaman penulis.

  • Andalas University
  • Institut Kesehatan Medistra Lubuk Pakam
  • Universitas Negeri Padang
  • Yogyakarta State University
  • Universitas Syedza Saintika
  • Universitas Islam Negeri Ar-Raniry
  • Chulalongkorn University
  • Organisasi lain
  • Organisasi berbeda
  • Organisasi sama
  • Afiliasi tidak diketahui
  • Garis lebih tebal = lebih banyak artikel bersama · lingkaran lebih besar = lebih banyak artikel
Tampilkan sebagai tabel
Rekan penulisOrganisasiArtikel bersama
Upita SeptianiAndalas University5
Barita AritonangInstitut Kesehatan Medistra Lubuk Pakam4
Vivi SiscaAndalas University4
Yeni StiadiAndalas University3
Syukri SyukriAndalas University3
Gusliani Eka PutriUniversitas Syedza Saintika3
Sri Hertanti WulanYogyakarta State University2
Karnirius HarefaInstitut Kesehatan Medistra Lubuk Pakam2
Rahmad GurusingaInstitut Kesehatan Medistra Lubuk Pakam2
Irmayani IrmayaniInstitut Kesehatan Medistra Lubuk Pakam2
Diana Vanda WelliaAndalas University2
Zulhadjri ZulhadjriAndalas University2
Wulandari WulandariAndalas University2
Safni SafniAndalas University2
Yohandri YohandriUniversitas Negeri Padang2
Hary SanjayaUniversitas Negeri Padang2
Septian BudimanChulalongkorn University2
Nabiila Ayyu TrycahyaniAndalas University2
Mai EfdiAndalas University1
Kevin SeptiogaAndalas University1
Yulia Eka PutriAndalas University1
Sri Rahayu Alfitri UsnaAndalas University1
Astuti AstutiAndalas University1
Ihda KhairaAndalas University1
Febrina ArfiUniversitas Islam Negeri Ar-Raniry1
Admin AlifAndalas University1
Reza Audina PutriAndalas University1
Yessi RahmayaniAndalas University1
Hazanita JumiatyAndalas University1
Zilfa ZilfaAndalas University1
Aju DeskaAndalas University1
Enzo W.B SiahaanUniversitas Sumatera Utara1
Khairiah KhairiahUniversitas Muslim Nusantara Al Washliyah1
Debi MeilaniInstitut Kesehatan Medistra Lubuk Pakam1

Afiliasi berasal dari OpenAlex; metadata OAI-PMH jurnal tidak memuatnya. Penulis tanpa ID OpenAlex dicocokkan berdasarkan nama, sehingga dua orang bisa tergabung atau satu orang bisa terpisah.

Sumber metadata: OpenAlex API (jurnal SINTA, ADR 0048) https://openalex.org/S2764840418, pertama di-harvest 19 Nov 2026, terakhir terlihat 19 Nov 2026.
Metadata asli (oai_dc)
<oai_dc:dc xmlns:dc="http://purl.org/dc/elements/1.1/" xmlns:oai_dc="http://www.openarchives.org/OAI/2.0/oai_dc/"><dc:title xml:lang="en">Influence of LLDPE-g-MA on Mechanical Properties, Degradation Performance and Water Absorption of Thermoplastic Sago Starch Blends</dc:title><dc:creator>Denny Akbar Tanjung</dc:creator><dc:creator>Novesar Jamarun</dc:creator><dc:creator>Syukri Arief</dc:creator><dc:creator>Hermansyah Aziz</dc:creator><dc:creator>Ahmad Hafizullah Ritonga</dc:creator><dc:creator>Boy Isfa</dc:creator><dc:subject>sago starch</dc:subject><dc:subject>starch plasticization</dc:subject><dc:subject>glycerol</dc:subject><dc:subject>tensile strength</dc:subject><dc:subject>elongation at break</dc:subject><dc:subject>Young's modulus</dc:subject><dc:subject>surface morphology</dc:subject><dc:subject>interfacial adhesion</dc:subject><dc:subject>water absorption</dc:subject><dc:subject>biodegradation</dc:subject><dc:subject>biodegradable polymers</dc:subject><dc:description xml:lang="en">The addition of LLDPE-g-MA into the compound of sago starch/LLDPE was studied to improve its mechanical, morphology, degradation performance, and water absorption properties. Thermoplastic Sago Starch was composed of a mixture of sago starch and glycerol. LLDPE-g-MA was prepared in varied concentrations based on the weight of TPSS (0, 6, 8, 10, and 14 wt.%) by reacting LLDPE, maleic anhydride, and benzoyl peroxide using an internal mixer. The results showed an increase in values obtained from mechanical tests, i.e., tensile strength was improved from 0.6902 to 3.6187 N/mm2 with the addition of LLDPE-g-MA at 10 wt.%. The addition also resulted in a 1.44% increment in elongation at break and 251 N/mm2 for Young's Modulus. The surface morphology of the sample demonstrated an excellent interfacial adhesion reaction or LLDPE dispersion over the entire surface of the matrix (starch). The water absorption test continued to decrease with the increase in the LLDPE-g-MA concentration from 53 wt.% (without LLDPE-g-MA) to 14 wt.% at 10 wt.% LLDPE-g-MA concentration. The degradation performance showed that the sample could be degraded under all three conditions for up to 30 days.</dc:description><dc:publisher>Gadjah Mada University</dc:publisher><dc:date>2022-01-04</dc:date><dc:type>info:eu-repo/semantics/article</dc:type><dc:format>application/pdf</dc:format><dc:identifier>https://doi.org/10.22146/ijc.68558</dc:identifier><dc:identifier>10.22146/ijc.68558</dc:identifier><dc:source>Indonesian Journal of Chemistry; Vol 22 No 1 (2022); 171-171</dc:source><dc:source>1411-9420</dc:source><dc:source>2460-1578</dc:source><dc:language>en</dc:language><dc:relation>https://jurnal.ugm.ac.id/ijc/article/download/68558/32836</dc:relation><dc:rights>https://creativecommons.org/licenses/by-nc-nd/4.0/</dc:rights></oai_dc:dc>