Melola Discovery

← Melola Discovery

Akses terbuka Jurnal SINTA 1

Effect of Sintering Temperature on the Microstructure Behavior of Gelcasted Porous Ceramics Using Cassava Starch as Pore Template

Indonesian Journal of Chemistry · Vol. 23 No. 5 (2023) · hlm. 1199–1199

DOI
10.22146/ijc.78875
ISSN
1411-9420, 2460-1578
Terbit
2023-10-16
Penerbit
Gadjah Mada University
Bahasa
en
Lisensi
creativecommons.org/licenses/by-nc-nd/4.0/

Abstrak

The gelcasting technique was employed to fabricate porous ceramics utilizing kaolinite clay as the base material with a combination of 20 wt.% cassava starch. The utilization of cassava starch as a pore-template material is a sustainable and eco-friendly approach. The dry mixture compacted pellets underwent calcination for 2 h at three distinct sintering temperatures, namely 900, 1000, and 1100 °C. The present study investigated the impact of sintering temperatures on various ceramic properties, including but not limited to porosity, hardness, crystallinity, lattice strain, and morphology. Furthermore, an increase in sintering temperature led to a reduction in crystallinity of the ceramic material from 81.71 to 78.06%, while the lattice strain increased, as determined by the full width at half maximum peak diffraction calculation. The study determined that the pore size remained microporous (21 Å) across all temperature treatments. Ultimately, a porous ceramic material was fabricated, exhibiting a porosity of 39.44% by volume and a desirable hardness of 94 HB. The optimal sintering temperature for this material was found to be 900 °C. The anticipated application of the porous ceramic, which has taken on a pellet shape, is as a catalyst support for wastewater filtration in the future.

Kata kunci

Jaringan kolaborasi para penulis

40 penulis · 135 tautan kepenulisan bersama · 91 lintas organisasi · menampilkan 40 yang paling banyak terhubung

Arahkan kursor atau ketuk sebuah nama untuk menyorot rekan penulisnya. Klik dua kali untuk membuka halaman penulis.

  • Hasanuddin University
  • State University of Makassar
  • University of Brawijaya
  • Tadulako University
  • Akademi Farmasi Yamasi Makassar
  • Chungbuk National University
  • National Nuclear Energy Agency of Indonesia
  • Organisasi lain
  • Afiliasi tidak diketahui
  • Organisasi berbeda
  • Organisasi sama
  • Afiliasi tidak diketahui
  • Garis lebih tebal = lebih banyak artikel bersama · lingkaran lebih besar = lebih banyak artikel
Tampilkan sebagai tabel
Rekan penulisOrganisasiArtikel bersama
Ahyar AhmadHasanuddin University6
Harningsih KarimAkademi Farmasi Yamasi Makassar5
Indah RayaHasanuddin University4
Rizal IrfandiState University of Makassar4
Susilo Sudarman DesaThammasat University3
S. TougaardUniversity of Southern Denmark2
Hee Jae KangChungbuk National University2
Paulina TabaHasanuddin University2
Siti Halimah LarekengHasanuddin University2
Satria Putra Jaya NegaraHasanuddin University2
H. J. KangChungbuk National University1
Okky Agassy FirmansyahNational Nuclear Energy Agency of Indonesia1
Evi AfriantiHasanuddin University1
B.Y. Eko Budi JumpenoNational Nuclear Energy Agency of Indonesia1
June MellawatiNational Nuclear Energy Agency of Indonesia1
Yulianti YuliantiSunan Gunung Djati State Islamic University Bandung1
Suarga SuargaHasanuddin University1
Nur Harmila SariHasanuddin University1
Masruroh MasrurohUniversity of Brawijaya1
Gancang SarojaUniversity of Brawijaya1
Dionysius Joseph Djoko Herry SantjojoUniversity of Brawijaya1
Suhk Kun OhChungbuk National University1
Sung HeoSamsung (South Korea)1
Jae Gwan ChungSamsung (South Korea)1
Jae Cheol LeeSamsung (South Korea)1
Fauzan .Tadulako University1
Muh SabirAfiliasi tidak diketahui1
Adhar ArifuddinTadulako University1
A Fahira NurUniversitas Widya Nusantara1
Ratna DeviTadulako University1
Ni Wayan SridaniTadulako University1
Arief AzisAkademi Farmasi Yamasi Makassar1
Ananda RamadaniAkademi Farmasi Yamasi Makassar1

Afiliasi berasal dari OpenAlex; metadata OAI-PMH jurnal tidak memuatnya. Penulis tanpa ID OpenAlex dicocokkan berdasarkan nama, sehingga dua orang bisa tergabung atau satu orang bisa terpisah.

Sumber metadata: OpenAlex API (jurnal SINTA, ADR 0048) https://openalex.org/S2764840418, pertama di-harvest 19 Nov 2026, terakhir terlihat 19 Nov 2026.
Metadata asli (oai_dc)
<oai_dc:dc xmlns:dc="http://purl.org/dc/elements/1.1/" xmlns:oai_dc="http://www.openarchives.org/OAI/2.0/oai_dc/"><dc:title xml:lang="en">Effect of Sintering Temperature on the Microstructure Behavior of Gelcasted Porous Ceramics Using Cassava Starch as Pore Template</dc:title><dc:creator>Suriati Eka Putri</dc:creator><dc:creator>Diana Eka Pratiwi</dc:creator><dc:creator>Rachmat Triandi Tjahjanto</dc:creator><dc:creator>Nita Magfirah Ilyas</dc:creator><dc:creator>Dahlang Tahir</dc:creator><dc:creator>Abd Rahman</dc:creator><dc:creator>Heryanto Heryanto</dc:creator><dc:subject>porous ceramics</dc:subject><dc:subject>sintering temperature</dc:subject><dc:subject>cassava starch</dc:subject><dc:subject>gel casting</dc:subject><dc:subject>kaolinite</dc:subject><dc:subject>crystallinity</dc:subject><dc:subject>lattice strain</dc:subject><dc:subject>porosity</dc:subject><dc:subject>hardness</dc:subject><dc:subject>microporous structure</dc:subject><dc:subject>catalyst supports</dc:subject><dc:subject>wastewater filtration</dc:subject><dc:description xml:lang="en">The gelcasting technique was employed to fabricate porous ceramics utilizing kaolinite clay as the base material with a combination of 20 wt.% cassava starch. The utilization of cassava starch as a pore-template material is a sustainable and eco-friendly approach. The dry mixture compacted pellets underwent calcination for 2 h at three distinct sintering temperatures, namely 900, 1000, and 1100 °C. The present study investigated the impact of sintering temperatures on various ceramic properties, including but not limited to porosity, hardness, crystallinity, lattice strain, and morphology. Furthermore, an increase in sintering temperature led to a reduction in crystallinity of the ceramic material from 81.71 to 78.06%, while the lattice strain increased, as determined by the full width at half maximum peak diffraction calculation. The study determined that the pore size remained microporous (21 Å) across all temperature treatments. Ultimately, a porous ceramic material was fabricated, exhibiting a porosity of 39.44% by volume and a desirable hardness of 94 HB. The optimal sintering temperature for this material was found to be 900 °C. The anticipated application of the porous ceramic, which has taken on a pellet shape, is as a catalyst support for wastewater filtration in the future.</dc:description><dc:publisher>Gadjah Mada University</dc:publisher><dc:date>2023-10-16</dc:date><dc:type>info:eu-repo/semantics/article</dc:type><dc:format>application/pdf</dc:format><dc:identifier>https://doi.org/10.22146/ijc.78875</dc:identifier><dc:identifier>10.22146/ijc.78875</dc:identifier><dc:source>Indonesian Journal of Chemistry; Vol 23 No 5 (2023); 1199-1199</dc:source><dc:source>1411-9420</dc:source><dc:source>2460-1578</dc:source><dc:language>en</dc:language><dc:relation>https://jurnal.ugm.ac.id/ijc/article/download/78875/37005</dc:relation><dc:rights>https://creativecommons.org/licenses/by-nc-nd/4.0/</dc:rights></oai_dc:dc>