Melola Discovery

← Melola Discovery

Akses terbuka Jurnal SINTA 1

A Novel Molecular Imprint Polymer Synthesis for Solid Phase Extraction of Andrographolide

Indonesian Journal of Chemistry · Vol. 19 No. 1 (2019) · hlm. 219–219

DOI
10.22146/ijc.34369
ISSN
1411-9420, 2460-1578
Terbit
2019-01-29
Penerbit
Gadjah Mada University
Bahasa
en
Lisensi
creativecommons.org/licenses/by-nc-nd/4.0/

Abstrak

The use of molecularly imprinted polymers for Solid phase micro-extraction (SPME) of bioactive compounds are getting popularity. The interest on efficient extraction process of andrographolide from the plant is increasing due to their vast therapeutic applications. In this study, andrographolide imprinted MIP was prepared by precipitation polymerization method using the non-covalent technique to use as sorbent materials for solid phase extraction of the bioactive compound. HyperChem 8.0.10 software was used to investigate and optimize the template and functional monomer ratio in the pre-polymerization system to synthesize the imprinted polymers. Molecular modeling gives information about molecular interactions and the Gibbs free energies of the pre-polymerization complex. Based on the computational study, andrographolide, methacrylic acid (MAA) and ethylene glycol dimethacrylate (EGDMA) were used as the template, functional monomer, and cross-linker, respectively at the 1:3:20 ratios. The MIPs were characterized by kinetic study and imprinting factor. The binding parameters for the recognition of andrographolide were studied using Langmuir, Freundlich and Langmuir-Freundlich adsorption isotherm models. Andrographolide MIP contains the maximum number of binding sites with the adsorption capacity of 149.59 μg/g. The SPME experimental data best fit with Langmuir-Freundlich isotherm model with the R2 value of 0.997. This research shows that the MIPs prepared by precipitation polymerization gives a good extraction capability using SPME method.

Kata kunci

Jaringan kolaborasi para penulis

15 penulis · 37 tautan kepenulisan bersama · 12 lintas organisasi

Arahkan kursor atau ketuk sebuah nama untuk menyorot rekan penulisnya. Klik dua kali untuk membuka halaman penulis.

  • Universiti Malaysia Perlis
  • Universitas Gadjah Mada
  • Lampung University
  • Organisasi berbeda
  • Organisasi sama
  • Afiliasi tidak diketahui
  • Garis lebih tebal = lebih banyak artikel bersama · lingkaran lebih besar = lebih banyak artikel
Tampilkan sebagai tabel
Rekan penulisOrganisasiArtikel bersama
Iqmal TahirUniversitas Gadjah Mada7
Emi Shaqiza AziziUniversiti Malaysia Perlis2
D. ArbainUniversiti Malaysia Perlis2
Dachyar ArbainUniversiti Malaysia Perlis2
Karna WijayaUniversitas Gadjah Mada2
Karna WijayaUniversitas Gadjah Mada1
Andrian SaputraLampung University1
Nur Izzati IberahimUniversiti Malaysia Perlis1
Yee Chee HannUniversiti Malaysia Perlis1
Khairunissa Syairah Ahmad SohaimiUniversiti Malaysia Perlis1

Afiliasi berasal dari OpenAlex; metadata OAI-PMH jurnal tidak memuatnya. Penulis tanpa ID OpenAlex dicocokkan berdasarkan nama, sehingga dua orang bisa tergabung atau satu orang bisa terpisah.

Sumber metadata: OpenAlex API (jurnal SINTA, ADR 0048) https://openalex.org/S2764840418, pertama di-harvest 19 Nov 2026, terakhir terlihat 19 Nov 2026.
Metadata asli (oai_dc)
<oai_dc:dc xmlns:dc="http://purl.org/dc/elements/1.1/" xmlns:oai_dc="http://www.openarchives.org/OAI/2.0/oai_dc/"><dc:title xml:lang="en">A Novel Molecular Imprint Polymer Synthesis for Solid Phase Extraction of Andrographolide</dc:title><dc:creator>Hemavathi Krishnan</dc:creator><dc:creator>A.K.M. Shafiqul Islam</dc:creator><dc:creator>Zainab Hamzah</dc:creator><dc:creator>Pubalan Nadaraja</dc:creator><dc:creator>Mohd Noor Ahmad</dc:creator><dc:subject>molecularly imprinted polymers</dc:subject><dc:subject>andrographolide</dc:subject><dc:subject>solid-phase microextraction</dc:subject><dc:subject>precipitation polymerization</dc:subject><dc:subject>non-covalent imprinting</dc:subject><dc:subject>molecular modeling</dc:subject><dc:subject>adsorption isotherms</dc:subject><dc:subject>Sips isotherm</dc:subject><dc:subject>imprinting factor</dc:subject><dc:subject>methacrylic acid</dc:subject><dc:subject>ethylene glycol dimethacrylate</dc:subject><dc:subject>bioactive compound extraction</dc:subject><dc:description xml:lang="en">The use of molecularly imprinted polymers for Solid phase micro-extraction (SPME) of bioactive compounds are getting popularity. The interest on efficient extraction process of andrographolide from the plant is increasing due to their vast therapeutic applications. In this study, andrographolide imprinted MIP was prepared by precipitation polymerization method using the non-covalent technique to use as sorbent materials for solid phase extraction of the bioactive compound. HyperChem 8.0.10 software was used to investigate and optimize the template and functional monomer ratio in the pre-polymerization system to synthesize the imprinted polymers. Molecular modeling gives information about molecular interactions and the Gibbs free energies of the pre-polymerization complex. Based on the computational study, andrographolide, methacrylic acid (MAA) and ethylene glycol dimethacrylate (EGDMA) were used as the template, functional monomer, and cross-linker, respectively at the 1:3:20 ratios. The MIPs were characterized by kinetic study and imprinting factor. The binding parameters for the recognition of andrographolide were studied using Langmuir, Freundlich and Langmuir-Freundlich adsorption isotherm models. Andrographolide MIP contains the maximum number of binding sites with the adsorption capacity of 149.59 μg/g. The SPME experimental data best fit with Langmuir-Freundlich isotherm model with the R2 value of 0.997. This research shows that the MIPs prepared by precipitation polymerization gives a good extraction capability using SPME method.</dc:description><dc:publisher>Gadjah Mada University</dc:publisher><dc:date>2019-01-29</dc:date><dc:type>info:eu-repo/semantics/article</dc:type><dc:identifier>https://doi.org/10.22146/ijc.34369</dc:identifier><dc:identifier>10.22146/ijc.34369</dc:identifier><dc:source>Indonesian Journal of Chemistry; Vol 19 No 1 (2019); 219-219</dc:source><dc:source>1411-9420</dc:source><dc:source>2460-1578</dc:source><dc:language>en</dc:language><dc:rights>https://creativecommons.org/licenses/by-nc-nd/4.0/</dc:rights></oai_dc:dc>