Melola Discovery

← Melola Discovery

Akses terbuka Jurnal SINTA 1

Effect of Calcium Carbonate Content on the Mechanical and Thermal Properties of Chitosan-Coated Poly(urethane) Foams

Indonesian Journal of Chemistry · Vol. 22 No. 1 (2022) · hlm. 827–827

DOI
10.22146/ijc.72135
ISSN
1411-9420, 2460-1578
Terbit
2022-06-14
Penerbit
Gadjah Mada University
Bahasa
en
Lisensi
creativecommons.org/licenses/by-nc-nd/4.0/

Abstrak

In this work, the effect of chitosan and CaCO3 coating on polyurethane (PU) foam on the mechanical and thermal properties was studied. PU-foams were soaked in a mixture of chitosan- calcium carbonate solution at different concentrations, i.e., 0.1–0.4%. The molecular behaviors due to the incorporation of chitosan/CaCO3 into the PU-foam matrix were investigated by Fourier-Transform Infrared (FTIR) spectroscopy. Field Emission Scanning Electron Microscope (FE-SEM) was utilized to study the effect of chitosan/CaCO3 coat on the pore structure of PU-foam. FTIR spectra show changes in the peak of 1446 and 1413 cm–1, which serve as evidence of molecular interaction between PU and chitosan/CaCO3. FE-SEM images show that the addition of chitosan/calcium carbonate cells was starting to close together, probably due to the increased dispersion of calcium carbonate on the entire surface of PU-foams/chitosan, which indicates that reducing the size of the cell will increase mechanical properties. From this study, it was found that PU-foam soaked in 0.4% CaCO3 had the highest tensile strength. Coating PU-foam with 0.4% CaCO3 also improved its thermal stability, indicated by an increase in its residual mass compared to neat PU-foam.

Kata kunci

Jaringan kolaborasi para penulis

40 penulis · 125 tautan kepenulisan bersama · 60 lintas organisasi

Arahkan kursor atau ketuk sebuah nama untuk menyorot rekan penulisnya. Klik dua kali untuk membuka halaman penulis.

  • University of Indonesia
  • National Research and Innovation Agency
  • Indonesian Institute of Sciences
  • Universitas Bhayangkara Jakarta Raya
  • Politeknik AKA Bogor
  • Atma Jaya University Yogyakarta
  • Université de Bretagne Sud
  • Organisasi lain
  • Afiliasi tidak diketahui
  • Organisasi berbeda
  • Organisasi sama
  • Afiliasi tidak diketahui
  • Garis lebih tebal = lebih banyak artikel bersama · lingkaran lebih besar = lebih banyak artikel
Tampilkan sebagai tabel
Rekan penulisOrganisasiArtikel bersama
Adam Febriyanto NugrahaUniversity of Indonesia4
Hari Eko IriantoNational Research and Innovation Agency3
Jaka Fajar FatriansyahUniversity of Indonesia3
Ghiska RamahditaUniversity of Indonesia2
B. Boy Rahardjo SidarthaAfiliasi tidak diketahui2
Azizah Intan PangestyUniversity of Indonesia2
Dina FransiskaNational Research and Innovation Agency2
Sabina HastianaAtma Jaya University Yogyakarta2
Gilles AusiasUniversité de Bretagne Sud2
Joddy Arya LaksmonoNational Research and Innovation Agency2
Annisa RifathinNational Research and Innovation Agency2
Ade Mundari WijayaNational Research and Innovation Agency2
Salma IlmiatiUniversity of Indonesia2
Jana HafizaUniversity of Indonesia2
Qolby SabrinaIndonesian Institute of Sciences1
Sotya AstutiningsihUniversity of Indonesia1
Christin Rina RatriIndonesian Institute of Sciences1
Titik LestariningsihIndonesian Institute of Sciences1
Anne ZulfiaUniversity of Indonesia1
Ismojo IsmojoUniversity of Indonesia1
Abdul Aziz AmmarUniversity of Indonesia1
Dick Ferieno FirdausUniversity of Indonesia1
Masrudin MasrudinUniversity of Indonesia1
Dessy Ayu LestariUniversity of Indonesia1
Mutya Rahmah ArbiUniversity of Indonesia1
Nurhayati NurhayatiPoliteknik Negeri Ujung Pandang1
Rini RiastutiUniversity of Indonesia1
Imam PrabowoUniversity of Indonesia1
Hanindito Haidar SatrioUniversity of Indonesia1
Muhammad Joshua Yuriansyah BarmakiUniversity of Indonesia1
Arbi Irsyad FikriUniversity of Indonesia1
Rina NingtyasJakarta State Polytechnic1
Muhammad Emirsyah PutraUniversity of Indonesia1
Dea Talitha SyaharaUniversity of Indonesia1
Hiroshi UyamaThe University of Osaka1

Afiliasi berasal dari OpenAlex; metadata OAI-PMH jurnal tidak memuatnya. Penulis tanpa ID OpenAlex dicocokkan berdasarkan nama, sehingga dua orang bisa tergabung atau satu orang bisa terpisah.

Sumber metadata: OpenAlex API (jurnal SINTA, ADR 0048) https://openalex.org/S2764840418, pertama di-harvest 19 Nov 2026, terakhir terlihat 19 Nov 2026.
Metadata asli (oai_dc)
<oai_dc:dc xmlns:dc="http://purl.org/dc/elements/1.1/" xmlns:oai_dc="http://www.openarchives.org/OAI/2.0/oai_dc/"><dc:title xml:lang="en">Effect of Calcium Carbonate Content on the Mechanical and Thermal Properties of Chitosan-Coated Poly(urethane) Foams</dc:title><dc:creator>Elvi Kustiyah</dc:creator><dc:creator>Achmad Nandang Roziafanto</dc:creator><dc:creator>Majid Amrullah</dc:creator><dc:creator>Dedi Priadi</dc:creator><dc:creator>Mochamad Chalid</dc:creator><dc:subject>polyurethane foam</dc:subject><dc:subject>chitosan coating</dc:subject><dc:subject>calcium carbonate</dc:subject><dc:subject>mechanical properties</dc:subject><dc:subject>thermal stability</dc:subject><dc:subject>tensile strength</dc:subject><dc:subject>pore structure</dc:subject><dc:subject>cell size</dc:subject><dc:subject>residual mass</dc:subject><dc:description xml:lang="en">In this work, the effect of chitosan and CaCO3 coating on polyurethane (PU) foam on the mechanical and thermal properties was studied. PU-foams were soaked in a mixture of chitosan- calcium carbonate solution at different concentrations, i.e., 0.1–0.4%. The molecular behaviors due to the incorporation of chitosan/CaCO3 into the PU-foam matrix were investigated by Fourier-Transform Infrared (FTIR) spectroscopy. Field Emission Scanning Electron Microscope (FE-SEM) was utilized to study the effect of chitosan/CaCO3 coat on the pore structure of PU-foam. FTIR spectra show changes in the peak of 1446 and 1413 cm–1, which serve as evidence of molecular interaction between PU and chitosan/CaCO3. FE-SEM images show that the addition of chitosan/calcium carbonate cells was starting to close together, probably due to the increased dispersion of calcium carbonate on the entire surface of PU-foams/chitosan, which indicates that reducing the size of the cell will increase mechanical properties. From this study, it was found that PU-foam soaked in 0.4% CaCO3 had the highest tensile strength. Coating PU-foam with 0.4% CaCO3 also improved its thermal stability, indicated by an increase in its residual mass compared to neat PU-foam.</dc:description><dc:publisher>Gadjah Mada University</dc:publisher><dc:date>2022-06-14</dc:date><dc:type>info:eu-repo/semantics/article</dc:type><dc:format>application/pdf</dc:format><dc:identifier>https://doi.org/10.22146/ijc.72135</dc:identifier><dc:identifier>10.22146/ijc.72135</dc:identifier><dc:source>Indonesian Journal of Chemistry; Vol 22 No 1 (2022); 827-827</dc:source><dc:source>1411-9420</dc:source><dc:source>2460-1578</dc:source><dc:language>en</dc:language><dc:relation>https://jurnal.ugm.ac.id/ijc/article/download/72135/33934</dc:relation><dc:rights>https://creativecommons.org/licenses/by-nc-nd/4.0/</dc:rights></oai_dc:dc>