Melola Discovery

← Melola Discovery

Akses terbuka Jurnal SINTA 1

Synthesis of Polyurethane/Silica Modified Epoxy Polymer Based on 1,3-Propanediol for Coating Application

Indonesian Journal of Chemistry · Vol. 17 No. 3 (2017) · hlm. 477–477

DOI
10.22146/ijc.22321
ISSN
1411-9420, 2460-1578
Terbit
2017-11-30
Penerbit
Gadjah Mada University
Bahasa
en
Lisensi
creativecommons.org/licenses/by-nc-nd/4.0/

Abstrak

Studies on the synthesis of polyurethane/silica modified epoxy polymer using 1,3-propanediol has been conducted. Synthesis of polymers made by reaction of tolonate and 1,3-propanediol (ratio NCO/OH=2.5) as the building blocks of polyurethane with diglycidyl ether bisphenol A (DGEBA) epoxy and catalyst dibutyltin dilaurate (DBTL).The total weight of the polyurethane used was 20% (w/w) of the total epoxy. Based on Fourier Transform Infrared (FTIR) and 1H-Nuclear Magnetic Resonance (1H-NMR) spectra indicated the existence of a new bond that is formed from the reaction of isocyanate group and hydroxyl group, where the hydroxyl groups derived from epoxy and 1,3-propanediol. The addition of silica (5, 10, and 15% w/w to epoxy) into the epoxy-modified polyurethane has been carried out through sol-gel reaction of tetraethyl orthosilicate (TEOS). The isocyanate conversion rate for the addition of silica 5, 10, and 15% are 95.69; 100, and 100%, respectively. The morphology and element identification by Scanning Electron Microscopy/Energy Dispersive X-Ray Analysis (SEM/EDX), showed that Si element has been successfully added in the polymer. From the tensile strength and elongation analysis, also thermal stability analysis using Thermal Gravimetric Analyzer (TGA), the increase of silica amount into the polyurethane modified epoxy did not significantly affect to thermal properties, but decrease the tensile strength of the polymer.

Kata kunci

Jaringan kolaborasi para penulis

40 penulis · 114 tautan kepenulisan bersama · 44 lintas organisasi · menampilkan 40 yang paling banyak terhubung

Arahkan kursor atau ketuk sebuah nama untuk menyorot rekan penulisnya. Klik dua kali untuk membuka halaman penulis.

  • Indonesian Institute of Sciences
  • Universitas Gadjah Mada
  • Padjadjaran University
  • Sebelas Maret University
  • Universitas Muhammadiyah Prof Dr Hamka
  • National Research and Innovation Agency
  • University of Indonesia
  • Organisasi lain
  • Afiliasi tidak diketahui
  • Organisasi berbeda
  • Organisasi sama
  • Afiliasi tidak diketahui
  • Garis lebih tebal = lebih banyak artikel bersama · lingkaran lebih besar = lebih banyak artikel
Tampilkan sebagai tabel
Rekan penulisOrganisasiArtikel bersama
Dwi SiswantaUniversitas Gadjah Mada7
Yehezkiel Steven KurniawanUniversitas Gadjah Mada5
Eti Nurwening SholikhahUniversitas Gadjah Mada4
Chairil AnwarUniversitas Gadjah Mada4
Mustofa MustofaUniversitas Gadjah Mada3
Harno Dwi PranowoUniversitas Gadjah Mada3
Mustofa MustofaUniversitas Gadjah Mada3
Sri Juari SantosaUniversitas Gadjah Mada3
Berna ElyaUniversity of Indonesia2
Ruslin HadanuUniversitas Pattimura2
Gadang PriyotomoIndonesian Institute of Sciences2
Siska PrifiharniIndonesian Institute of Sciences2
Nina ArtantiIndonesian Institute of Sciences2
Linar Zalinar UdinIndonesian Institute of Sciences2
Yoshinosuke UsukiOsaka City University2
Unang SupratmanPadjadjaran University2
Rani MaharaniPadjadjaran University2
Kindi FarabiPadjadjaran University2
Nurlelasari NurlelasariPadjadjaran University2
Darwati DarwatiPadjadjaran University2
Tri MayantiPadjadjaran University2
Galuh WidiyartiIndonesian Institute of Sciences2
Keisuke OhtoSaga University2
Suryadi Budi UtomoSebelas Maret University2
Triyono TriyonoUniversitas Gadjah Mada2
Abu MasykurSebelas Maret University2
I Gusti Made Ngurah BudianaUniversity of Nusa Cendana2
KusmardiAfiliasi tidak diketahui1
Siti Saudah RohmatUniversitas Muhammadiyah Prof Dr Hamka1
Vera LadeskaUniversitas Muhammadiyah Prof Dr Hamka1
Sitarina WidyariniUniversitas Gadjah Mada1
Ahmad RandyNational Research and Innovation Agency1
Dewi SondariIndonesian Institute of Sciences1
Sri Budi HarmamiIndonesian Institute of Sciences1
Athanasia Amanda SeptevaniNational Research and Innovation Agency1

Afiliasi berasal dari OpenAlex; metadata OAI-PMH jurnal tidak memuatnya. Penulis tanpa ID OpenAlex dicocokkan berdasarkan nama, sehingga dua orang bisa tergabung atau satu orang bisa terpisah.

Sumber metadata: OpenAlex API (jurnal SINTA, ADR 0048) https://openalex.org/S2764840418, pertama di-harvest 19 Nov 2026, terakhir terlihat 19 Nov 2026.
Metadata asli (oai_dc)
<oai_dc:dc xmlns:dc="http://purl.org/dc/elements/1.1/" xmlns:oai_dc="http://www.openarchives.org/OAI/2.0/oai_dc/"><dc:title xml:lang="en">Synthesis of Polyurethane/Silica Modified Epoxy Polymer Based on 1,3-Propanediol for Coating Application</dc:title><dc:creator>Lutviasari Nuraini</dc:creator><dc:creator>Evi Triwulandari</dc:creator><dc:creator>Muhammad Ghozali</dc:creator><dc:creator>Muhammad Hanafi</dc:creator><dc:creator>Jumina Jumina</dc:creator><dc:subject>1,3-propanediol</dc:subject><dc:subject>DGEBA</dc:subject><dc:subject>tetraethoxysilane</dc:subject><dc:subject>sol-gel silica</dc:subject><dc:subject>isocyanate conversion</dc:subject><dc:subject>coating materials</dc:subject><dc:subject>tensile strength</dc:subject><dc:subject>thermal stability</dc:subject><dc:description xml:lang="en">Studies on the synthesis of polyurethane/silica modified epoxy polymer using 1,3-propanediol has been conducted. Synthesis of polymers made by reaction of tolonate and 1,3-propanediol (ratio NCO/OH=2.5) as the building blocks of polyurethane with diglycidyl ether bisphenol A (DGEBA) epoxy and catalyst dibutyltin dilaurate (DBTL).The total weight of the polyurethane used was 20% (w/w) of the total epoxy. Based on Fourier Transform Infrared (FTIR) and 1H-Nuclear Magnetic Resonance (1H-NMR) spectra indicated the existence of a new bond that is formed from the reaction of isocyanate group and hydroxyl group, where the hydroxyl groups derived from epoxy and 1,3-propanediol. The addition of silica (5, 10, and 15% w/w to epoxy) into the epoxy-modified polyurethane has been carried out through sol-gel reaction of tetraethyl orthosilicate (TEOS). The isocyanate conversion rate for the addition of silica 5, 10, and 15% are 95.69; 100, and 100%, respectively. The morphology and element identification by Scanning Electron Microscopy/Energy Dispersive X-Ray Analysis (SEM/EDX), showed that Si element has been successfully added in the polymer. From the tensile strength and elongation analysis, also thermal stability analysis using Thermal Gravimetric Analyzer (TGA), the increase of silica amount into the polyurethane modified epoxy did not significantly affect to thermal properties, but decrease the tensile strength of the polymer.</dc:description><dc:publisher>Gadjah Mada University</dc:publisher><dc:date>2017-11-30</dc:date><dc:type>info:eu-repo/semantics/article</dc:type><dc:identifier>https://doi.org/10.22146/ijc.22321</dc:identifier><dc:identifier>10.22146/ijc.22321</dc:identifier><dc:source>Indonesian Journal of Chemistry; Vol 17 No 3 (2017); 477-477</dc:source><dc:source>1411-9420</dc:source><dc:source>2460-1578</dc:source><dc:language>en</dc:language><dc:rights>https://creativecommons.org/licenses/by-nc-nd/4.0/</dc:rights></oai_dc:dc>