Akses terbuka
Jurnal
SINTA 1
Combustion Synthesis Ironmaking: Investigation on Required Carbon Amount in Raw Material from the Viewpoint of Adiabatic Flame Temperature Calculation
Indonesian Journal of Chemistry · Vol. 19 No. 3 (2019) · hlm. 696–696
ISSN 1411-9420, 2460-1578
Terbit 2019-05-29
Penerbit Gadjah Mada University
Bahasa en
Abstrak
Combustion synthesis (CS) is a simple and very fast method to synthesize a target material. New ironmaking method via the CS using carbon-infiltrated iron ore was proposed, and the possible conditions for the method were investigated. Adiabatic flame temperatures (Tad) of the CS reaction, maximum reachable temperatures in an adiabatic system, were calculated to estimate the sample temperature during the CS. To reach the adiabatic temperature of 1811 K, 23.9, 27.9, and 29.3 wt.%-C were required for Fe2O3, Fe3O4, and FeO, respectively. When the carbon amount is higher than the calculated one, molten iron which is separated from slag components should be obtained via the CS.
Jaringan kolaborasi para penulis
7 penulis ·
15 tautan kepenulisan bersama
Arahkan kursor atau ketuk sebuah nama untuk menyorot rekan penulisnya. Klik dua kali untuk membuka halaman penulis.
Organisasi berbeda
Organisasi sama
Afiliasi tidak diketahui
Garis lebih tebal = lebih banyak artikel bersama · lingkaran lebih besar = lebih banyak artikel
Tampilkan sebagai tabel
Afiliasi berasal dari OpenAlex; metadata OAI-PMH jurnal tidak memuatnya. Penulis tanpa ID OpenAlex dicocokkan berdasarkan nama, sehingga dua orang bisa tergabung atau satu orang bisa terpisah.
Sumber metadata: OpenAlex API (jurnal SINTA, ADR 0048) https://openalex.org/S2764840418, pertama di-harvest 19 Nov 2026, terakhir terlihat 19 Nov 2026.
Metadata asli (oai_dc)
<oai_dc:dc xmlns:dc="http://purl.org/dc/elements/1.1/" xmlns:oai_dc="http://www.openarchives.org/OAI/2.0/oai_dc/"><dc:title xml:lang="en">Combustion Synthesis Ironmaking: Investigation on Required Carbon Amount in Raw Material from the Viewpoint of Adiabatic Flame Temperature Calculation</dc:title><dc:creator>Keisuke Abé</dc:creator><dc:creator>Ade Kurniawan</dc:creator><dc:creator>Masafumi Sanada</dc:creator><dc:creator>Takahiro Nomura</dc:creator><dc:creator>Tomohiro Akiyama</dc:creator><dc:subject>combustion synthesis</dc:subject><dc:subject>ironmaking</dc:subject><dc:subject>adiabatic flame temperature</dc:subject><dc:subject>carbon content</dc:subject><dc:subject>iron oxide</dc:subject><dc:subject>Fe2O3</dc:subject><dc:subject>magnetite</dc:subject><dc:subject>FeO</dc:subject><dc:subject>molten iron</dc:subject><dc:subject>slag separation</dc:subject><dc:subject>iron ore reduction</dc:subject><dc:description xml:lang="en">Combustion synthesis (CS) is a simple and very fast method to synthesize a target material. New ironmaking method via the CS using carbon-infiltrated iron ore was proposed, and the possible conditions for the method were investigated. Adiabatic flame temperatures (Tad) of the CS reaction, maximum reachable temperatures in an adiabatic system, were calculated to estimate the sample temperature during the CS. To reach the adiabatic temperature of 1811 K, 23.9, 27.9, and 29.3 wt.%-C were required for Fe2O3, Fe3O4, and FeO, respectively. When the carbon amount is higher than the calculated one, molten iron which is separated from slag components should be obtained via the CS.</dc:description><dc:publisher>Gadjah Mada University</dc:publisher><dc:date>2019-05-29</dc:date><dc:type>info:eu-repo/semantics/article</dc:type><dc:format>application/pdf</dc:format><dc:identifier>https://doi.org/10.22146/ijc.38359</dc:identifier><dc:identifier>10.22146/ijc.38359</dc:identifier><dc:source>Indonesian Journal of Chemistry; Vol 19 No 3 (2019); 696-696</dc:source><dc:source>1411-9420</dc:source><dc:source>2460-1578</dc:source><dc:language>en</dc:language><dc:relation>https://jurnal.ugm.ac.id/ijc/article/download/38359/23884</dc:relation><dc:rights>https://creativecommons.org/licenses/by-nc-nd/4.0/</dc:rights></oai_dc:dc>
Sitasi dan pengindeksan
OpenAlex
Terindeks
lewat ID karya OpenAlex (record dari sumber OpenAlex)
2 sitasi
Crossref
Belum diperiksa
Jumlah menurut tiap indeks pada 19 Nov 2026; setiap indeks menghitung sitasi dengan cara berbeda.
OpenAlex juga mencatat karya ini di: crossref, doaj.
Sitasi artikel ini
APA 7
Abé, K., Kurniawan, A., Sanada, M., Nomura, T., & Akiyama, T. (2019). Combustion Synthesis Ironmaking: Investigation on Required Carbon Amount in Raw Material from the Viewpoint of Adiabatic Flame Temperature Calculation. Indonesian Journal of Chemistry, 19(3), 696–696. https://doi.org/10.22146/ijc.38359
Salin
IEEE
K. Abé, A. Kurniawan, M. Sanada, T. Nomura, and T. Akiyama, “Combustion Synthesis Ironmaking: Investigation on Required Carbon Amount in Raw Material from the Viewpoint of Adiabatic Flame Temperature Calculation,” Indonesian Journal of Chemistry, vol. 19, no. 3, pp. 696–696, 2019, doi: 10.22146/ijc.38359.
Salin
Dibuat dari metadata jurnal; periksa nama penulis sebelum dipakai.