Melola Discovery

← Melola Discovery

Akses terbuka Jurnal SINTA 1

Caking Phenomena During Pilot-Scale Crystallization of Dextrose Monohydrate

Indonesian Journal of Chemistry · Vol. 21 No. 5 (2021) · hlm. 1097–1097

DOI
10.22146/ijc.60095
ISSN
1411-9420, 2460-1578
Terbit
2021-09-02
Penerbit
Gadjah Mada University
Bahasa
en
Lisensi
creativecommons.org/licenses/by-nc-nd/4.0/

Abstrak

Dextrose Monohydrate (DMH) is a bulk chemical used in the food, beverage, and pharmaceutical industries. The caking often appeared in the crystallization of DMH. Caking is an agglomeration that can affect the product quality of DMH and is dependent on the type of impeller. This study aimed to determine the type of impeller to avoid the caking during the DMH crystallization and identify the DMH caking. The results showed that caking did not occur on the helical ribbon and anchor impeller, while caking appeared on the Rushton turbine impeller. Computational fluid mechanics (CFD) analysis showed that caking occurs due to uneven homogeneity of stirring. Fourier transform infrared (FTIR) and X-ray diffraction (XRD) studies showed that DMH caking and non-caking had the same peak pattern. Meanwhile, optical microscope and scanning electron microscope (SEM) analysis showed that the DMH caking seen agglomerate. Density analysis showed that DMH with caking was 1.257–1.350 kg/L, while the non-caking was 0.504–0.780 kg/L. Caking phenomena during the DMH crystallization can be avoided by using a helical ribbon and anchor impeller. FTIR and XRD analysis cannot be used to identify DMH caking products; meanwhile, optical microscope, SEM, and density analyzes can be used to identify DMH caking products.

Kata kunci

Jaringan kolaborasi para penulis

12 penulis · 25 tautan kepenulisan bersama · 16 lintas organisasi

Arahkan kursor atau ketuk sebuah nama untuk menyorot rekan penulisnya. Klik dua kali untuk membuka halaman penulis.

  • Universitas Gadjah Mada
  • National Research and Innovation Agency
  • Andalas University
  • University of Indonesia
  • Sumatera Institute of Technology
  • Universitas Pasir Pangaraian
  • Organisasi berbeda
  • Organisasi sama
  • Afiliasi tidak diketahui
  • Garis lebih tebal = lebih banyak artikel bersama · lingkaran lebih besar = lebih banyak artikel
Tampilkan sebagai tabel
Rekan penulisOrganisasiArtikel bersama
Dedi MardiansyahAndalas University3
Kuwat TrıyanaUniversitas Gadjah Mada2
Didik SudarsonoNational Research and Innovation Agency1
Slamet SlametUniversity of Indonesia1
Roto RotoUniversitas Gadjah Mada1
Lutfi Ayu PuspitaUniversitas Gadjah Mada1
Sri Rahayu Alfitri UsnaAndalas University1
Rindi Genesa HatikaUniversitas Pasir Pangaraian1
Suratun NafisahSumatera Institute of Technology1

Afiliasi berasal dari OpenAlex; metadata OAI-PMH jurnal tidak memuatnya. Penulis tanpa ID OpenAlex dicocokkan berdasarkan nama, sehingga dua orang bisa tergabung atau satu orang bisa terpisah.

Sumber metadata: OpenAlex API (jurnal SINTA, ADR 0048) https://openalex.org/S2764840418, pertama di-harvest 19 Nov 2026, terakhir terlihat 19 Nov 2026.
Metadata asli (oai_dc)
<oai_dc:dc xmlns:dc="http://purl.org/dc/elements/1.1/" xmlns:oai_dc="http://www.openarchives.org/OAI/2.0/oai_dc/"><dc:title xml:lang="en">Caking Phenomena During Pilot-Scale Crystallization of Dextrose Monohydrate</dc:title><dc:creator>Bayu Mahdi Kartika</dc:creator><dc:creator>Harsojo Harsojo</dc:creator><dc:creator>Eriawan Rismana</dc:creator><dc:subject>caking</dc:subject><dc:subject>crystallization</dc:subject><dc:subject>impeller type</dc:subject><dc:subject>helical ribbon impeller</dc:subject><dc:subject>anchor impeller</dc:subject><dc:subject>agglomeration</dc:subject><dc:description xml:lang="en">Dextrose Monohydrate (DMH) is a bulk chemical used in the food, beverage, and pharmaceutical industries. The caking often appeared in the crystallization of DMH. Caking is an agglomeration that can affect the product quality of DMH and is dependent on the type of impeller. This study aimed to determine the type of impeller to avoid the caking during the DMH crystallization and identify the DMH caking. The results showed that caking did not occur on the helical ribbon and anchor impeller, while caking appeared on the Rushton turbine impeller. Computational fluid mechanics (CFD) analysis showed that caking occurs due to uneven homogeneity of stirring. Fourier transform infrared (FTIR) and X-ray diffraction (XRD) studies showed that DMH caking and non-caking had the same peak pattern. Meanwhile, optical microscope and scanning electron microscope (SEM) analysis showed that the DMH caking seen agglomerate. Density analysis showed that DMH with caking was 1.257–1.350 kg/L, while the non-caking was 0.504–0.780 kg/L. Caking phenomena during the DMH crystallization can be avoided by using a helical ribbon and anchor impeller. FTIR and XRD analysis cannot be used to identify DMH caking products; meanwhile, optical microscope, SEM, and density analyzes can be used to identify DMH caking products.</dc:description><dc:publisher>Gadjah Mada University</dc:publisher><dc:date>2021-09-02</dc:date><dc:type>info:eu-repo/semantics/article</dc:type><dc:format>application/pdf</dc:format><dc:identifier>https://doi.org/10.22146/ijc.60095</dc:identifier><dc:identifier>10.22146/ijc.60095</dc:identifier><dc:source>Indonesian Journal of Chemistry; Vol 21 No 5 (2021); 1097-1097</dc:source><dc:source>1411-9420</dc:source><dc:source>2460-1578</dc:source><dc:language>en</dc:language><dc:relation>https://jurnal.ugm.ac.id/ijc/article/download/60095/31705</dc:relation><dc:rights>https://creativecommons.org/licenses/by-nc-nd/4.0/</dc:rights></oai_dc:dc>