Melola Discovery

← Melola Discovery

Akses terbuka Jurnal SINTA 1

Synthesis of Graphite Porous Electrode Based on Coconut Shell as a Potential Cathode in Bioelectrosyntesis Cell

Indonesian Journal of Chemistry · Vol. 19 No. 2 (2019) · hlm. 413–413

DOI
10.22146/ijc.37550
ISSN
1411-9420, 2460-1578
Terbit
2019-04-09
Penerbit
Gadjah Mada University
Bahasa
en
Lisensi
creativecommons.org/licenses/by-nc-nd/4.0/

Abstrak

Electrodes, as well as microorganisms, are key materials for the development of bioelectrosynthesis cell reactor. Materials used as electrodes should be inert, crystalline in structure with high surface area and porous morphology, enhancing their electroactive and adsorptive properties. Carbon material derived from coconut shell was modified by simultaneous sintering-activation methods, FeCl3 and ZnCl2 were supplemented at temperature 900 °C at the non-atmospheric condition. The modified carbon was then molded with polyvinyl alcohol as a binder and the temperature was maintained at 80 °C and 10 ton of pressure. Molded carbon was then installed in bioelectrosynthesis cell with a working volume of 200 mL, as a cathode. XRD, BET, and SEM measurements showed the transformation of carbon surface from amorphous into the crystalline, increased surface area (11 times higher) and higher porosity (up to 500 nm). This cathode modification was able to increase current density up to 4 times and reduce CO2 into butyrate, 250 mg/L, in bioelectrosynthesis cell.

Kata kunci

Jaringan kolaborasi para penulis

13 penulis · 29 tautan kepenulisan bersama · 7 lintas organisasi

Arahkan kursor atau ketuk sebuah nama untuk menyorot rekan penulisnya. Klik dua kali untuk membuka halaman penulis.

  • Diponegoro University
  • Universitas Gadjah Mada
  • National Research and Innovation Agency
  • Bandung Institute of Technology
  • Jenderal Soedirman University
  • Sebelas Maret University
  • Afiliasi tidak diketahui
  • Organisasi berbeda
  • Organisasi sama
  • Afiliasi tidak diketahui
  • Garis lebih tebal = lebih banyak artikel bersama · lingkaran lebih besar = lebih banyak artikel
Tampilkan sebagai tabel
Rekan penulisOrganisasiArtikel bersama
Kamtiyah NingsihDiponegoro University1
Fuad MuhammadDiponegoro University1
Puji LestariJenderal Soedirman University1
Agus KuncakaUniversitas Gadjah Mada1
Karna WijayaUniversitas Gadjah Mada1
Agus PurwantoSebelas Maret University1

Afiliasi berasal dari OpenAlex; metadata OAI-PMH jurnal tidak memuatnya. Penulis tanpa ID OpenAlex dicocokkan berdasarkan nama, sehingga dua orang bisa tergabung atau satu orang bisa terpisah.

Sumber metadata: OpenAlex API (jurnal SINTA, ADR 0048) https://openalex.org/S2764840418, pertama di-harvest 19 Nov 2026, terakhir terlihat 19 Nov 2026.
Metadata asli (oai_dc)
<oai_dc:dc xmlns:dc="http://purl.org/dc/elements/1.1/" xmlns:oai_dc="http://www.openarchives.org/OAI/2.0/oai_dc/"><dc:title xml:lang="en">Synthesis of Graphite Porous Electrode Based on Coconut Shell as a Potential Cathode in Bioelectrosyntesis Cell</dc:title><dc:creator>Aris Mukimin</dc:creator><dc:creator>Rustiana Yuliasni</dc:creator><dc:creator>Nur Zen</dc:creator><dc:creator>Kukuh Aryo Wicaksono</dc:creator><dc:creator>Januar Arif Fatkhurrahman</dc:creator><dc:creator>Hanny Vistanty</dc:creator><dc:creator>Rizal Awaludin Malik</dc:creator><dc:subject>coconut shell</dc:subject><dc:subject>porous carbon electrodes</dc:subject><dc:subject>bioelectrosynthesis</dc:subject><dc:subject>cathode</dc:subject><dc:subject>sintering activation</dc:subject><dc:subject>polyvinyl alcohol binder</dc:subject><dc:subject>butyrate production</dc:subject><dc:subject>CO2 reduction</dc:subject><dc:subject>current density</dc:subject><dc:subject>surface area and porosity</dc:subject><dc:description xml:lang="en">Electrodes, as well as microorganisms, are key materials for the development of bioelectrosynthesis cell reactor. Materials used as electrodes should be inert, crystalline in structure with high surface area and porous morphology, enhancing their electroactive and adsorptive properties. Carbon material derived from coconut shell was modified by simultaneous sintering-activation methods, FeCl3 and ZnCl2 were supplemented at temperature 900 °C at the non-atmospheric condition. The modified carbon was then molded with polyvinyl alcohol as a binder and the temperature was maintained at 80 °C and 10 ton of pressure. Molded carbon was then installed in bioelectrosynthesis cell with a working volume of 200 mL, as a cathode. XRD, BET, and SEM measurements showed the transformation of carbon surface from amorphous into the crystalline, increased surface area (11 times higher) and higher porosity (up to 500 nm). This cathode modification was able to increase current density up to 4 times and reduce CO2 into butyrate, 250 mg/L, in bioelectrosynthesis cell.</dc:description><dc:publisher>Gadjah Mada University</dc:publisher><dc:date>2019-04-09</dc:date><dc:type>info:eu-repo/semantics/article</dc:type><dc:format>application/pdf</dc:format><dc:identifier>https://doi.org/10.22146/ijc.37550</dc:identifier><dc:identifier>10.22146/ijc.37550</dc:identifier><dc:source>Indonesian Journal of Chemistry; Vol 19 No 2 (2019); 413-413</dc:source><dc:source>1411-9420</dc:source><dc:source>2460-1578</dc:source><dc:language>en</dc:language><dc:relation>https://jurnal.ugm.ac.id/ijc/article/download/37550/23453</dc:relation><dc:rights>https://creativecommons.org/licenses/by-nc-nd/4.0/</dc:rights></oai_dc:dc>