Melola Discovery

← Melola Discovery

Akses terbuka Jurnal SINTA 1

Functionalization of Cellulose through Polyurethanization by the Addition of Polyethylene Glycol and Diisocyanate

Indonesian Journal of Chemistry · Vol. 19 No. 1 (2019) · hlm. 124–124

DOI
10.22146/ijc.28550
ISSN
1411-9420, 2460-1578
Terbit
2019-01-03
Penerbit
Gadjah Mada University
Bahasa
en
Lisensi
creativecommons.org/licenses/by-nc-nd/4.0/

Abstrak

Plastic consumption becomes a main factor of land pollution due to poor degradability. To reduce the impact of land pollution, a biodegradable material such as cellulose, which has biodegradability, high strength, and specific modulus, is combined with plastic materials. However, the combination result poor compatibility because of different properties. Through grafting technique, the compatibility can be improved. The experimental results were conducted using Fourier-Transform Infrared (FT-IR), Simultaneous Thermal Analysis (STA), Scanning Electron Microscope (SEM) and 1H-Nuclear Magnetic Resonance (1H-NMR). The results revealed that the structure of hybrid material consists of cellulose as a chain extender in a hard segment which connects two diisocyanate compounds and polyol as a soft segment. The addition of 2.5 g of cellulose and 5 mole of diisocyanate can increase the melting temperature (Tm) of the hard segment from 417.92 to 460.72 °C and from 417.92 to 467.04 °C respectively. However, its melting temperatures of soft segment decrease from 378.53 to 350.74 °C and from 378.53 to 350.74 °C as well as the glass transition temperature (Tg) of the soft segment from 73.7 to 57.2 °C and from 73.7 to 71.8 °C. This study also discovers that cellulose and diisocyanate can raise thermal stability and create good interfacial bonding.

Kata kunci

Jaringan kolaborasi para penulis

40 penulis · 125 tautan kepenulisan bersama · 60 lintas organisasi

Arahkan kursor atau ketuk sebuah nama untuk menyorot rekan penulisnya. Klik dua kali untuk membuka halaman penulis.

  • University of Indonesia
  • National Research and Innovation Agency
  • Indonesian Institute of Sciences
  • Politeknik AKA Bogor
  • Universitas Bhayangkara Jakarta Raya
  • Atma Jaya University Yogyakarta
  • Université de Bretagne Sud
  • Organisasi lain
  • Afiliasi tidak diketahui
  • Organisasi berbeda
  • Organisasi sama
  • Afiliasi tidak diketahui
  • Garis lebih tebal = lebih banyak artikel bersama · lingkaran lebih besar = lebih banyak artikel
Tampilkan sebagai tabel
Rekan penulisOrganisasiArtikel bersama
Adam Febriyanto NugrahaUniversity of Indonesia3
Hari Eko IriantoNational Research and Innovation Agency2
Dedi PriadiUniversity of Indonesia2
Achmad Nandang RoziafantoPoliteknik AKA Bogor2
Jaka Fajar FatriansyahUniversity of Indonesia2
Elvi KustiyahUniversitas Bhayangkara Jakarta Raya2
Anne ZulfiaUniversity of Indonesia2
Ismojo IsmojoUniversity of Indonesia2
Abdul Aziz AmmarUniversity of Indonesia2
Qolby SabrinaIndonesian Institute of Sciences1
Sotya AstutiningsihUniversity of Indonesia1
Christin Rina RatriIndonesian Institute of Sciences1
Titik LestariningsihIndonesian Institute of Sciences1
B. Boy Rahardjo SidarthaAfiliasi tidak diketahui1
Azizah Intan PangestyUniversity of Indonesia1
Dina FransiskaNational Research and Innovation Agency1
Sabina HastianaAtma Jaya University Yogyakarta1
Gilles AusiasUniversité de Bretagne Sud1
Joddy Arya LaksmonoNational Research and Innovation Agency1
Annisa RifathinNational Research and Innovation Agency1
Ade Mundari WijayaNational Research and Innovation Agency1
Salma IlmiatiUniversity of Indonesia1
Jana HafizaUniversity of Indonesia1
Majid AmrullahUniversity of Indonesia1
Dick Ferieno FirdausUniversity of Indonesia1
Masrudin MasrudinUniversity of Indonesia1
Dessy Ayu LestariUniversity of Indonesia1
Mutya Rahmah ArbiUniversity of Indonesia1
Nurhayati NurhayatiPoliteknik Negeri Ujung Pandang1
Rini RiastutiUniversity of Indonesia1
Hanindito Haidar SatrioUniversity of Indonesia1
Muhammad Joshua Yuriansyah BarmakiUniversity of Indonesia1
Arbi Irsyad FikriUniversity of Indonesia1
Rina NingtyasJakarta State Polytechnic1
Muhammad Emirsyah PutraUniversity of Indonesia1
Dea Talitha SyaharaUniversity of Indonesia1
Hiroshi UyamaThe University of Osaka1

Afiliasi berasal dari OpenAlex; metadata OAI-PMH jurnal tidak memuatnya. Penulis tanpa ID OpenAlex dicocokkan berdasarkan nama, sehingga dua orang bisa tergabung atau satu orang bisa terpisah.

Sumber metadata: OpenAlex API (jurnal SINTA, ADR 0048) https://openalex.org/S2764840418, pertama di-harvest 19 Nov 2026, terakhir terlihat 19 Nov 2026.
Metadata asli (oai_dc)
<oai_dc:dc xmlns:dc="http://purl.org/dc/elements/1.1/" xmlns:oai_dc="http://www.openarchives.org/OAI/2.0/oai_dc/"><dc:title xml:lang="en">Functionalization of Cellulose through Polyurethanization by the Addition of Polyethylene Glycol and Diisocyanate</dc:title><dc:creator>Imam Prabowo</dc:creator><dc:creator>Ghiska Ramahdita</dc:creator><dc:creator>Mochamad Chalid</dc:creator><dc:subject>cellulose</dc:subject><dc:subject>polyurethane</dc:subject><dc:subject>polyethylene glycol</dc:subject><dc:subject>diisocyanates</dc:subject><dc:subject>grafting</dc:subject><dc:subject>biodegradable polymers</dc:subject><dc:subject>polymer blend compatibility</dc:subject><dc:subject>hard and soft segments</dc:subject><dc:subject>melting point</dc:subject><dc:subject>glass transition temperature</dc:subject><dc:subject>thermal stability</dc:subject><dc:subject>interfacial bonding</dc:subject><dc:subject>plastic waste reduction</dc:subject><dc:description xml:lang="en">Plastic consumption becomes a main factor of land pollution due to poor degradability. To reduce the impact of land pollution, a biodegradable material such as cellulose, which has biodegradability, high strength, and specific modulus, is combined with plastic materials. However, the combination result poor compatibility because of different properties. Through grafting technique, the compatibility can be improved. The experimental results were conducted using Fourier-Transform Infrared (FT-IR), Simultaneous Thermal Analysis (STA), Scanning Electron Microscope (SEM) and 1H-Nuclear Magnetic Resonance (1H-NMR). The results revealed that the structure of hybrid material consists of cellulose as a chain extender in a hard segment which connects two diisocyanate compounds and polyol as a soft segment. The addition of 2.5 g of cellulose and 5 mole of diisocyanate can increase the melting temperature (Tm) of the hard segment from 417.92 to 460.72 °C and from 417.92 to 467.04 °C respectively. However, its melting temperatures of soft segment decrease from 378.53 to 350.74 °C and from 378.53 to 350.74 °C as well as the glass transition temperature (Tg) of the soft segment from 73.7 to 57.2 °C and from 73.7 to 71.8 °C. This study also discovers that cellulose and diisocyanate can raise thermal stability and create good interfacial bonding.</dc:description><dc:publisher>Gadjah Mada University</dc:publisher><dc:date>2019-01-03</dc:date><dc:type>info:eu-repo/semantics/article</dc:type><dc:identifier>https://doi.org/10.22146/ijc.28550</dc:identifier><dc:identifier>10.22146/ijc.28550</dc:identifier><dc:source>Indonesian Journal of Chemistry; Vol 19 No 1 (2019); 124-124</dc:source><dc:source>1411-9420</dc:source><dc:source>2460-1578</dc:source><dc:language>en</dc:language><dc:rights>https://creativecommons.org/licenses/by-nc-nd/4.0/</dc:rights></oai_dc:dc>