Melola Discovery

← Melola Discovery

Jurnal SINTA 2

X-Band Metasurface EM Wave Absorber using SRR and Stripline: Model, Design and Implementation

Journal of ICT Research and Applications (JICTRA) · Vol. 18 No. 2 (2024) · pp. 155–174

DOI
10.5614/itbj.ict.res.appl.2023.18.2.6
ISSN
2338-5499, 2337-5787
Published
2024-10-31
Publisher
DRI - ITB
Language
eng

Abstract

This paper presents a model, design, and implementation of a metasurface electromagnetic (EM) wave absorber for operation in the frequency range of the X-band. The model of the metasurface was constructed with a split ring resonator (SSR) and a stripline and it was designed with a single unit cell, whereby the results were approached with transmission line theory for patch impedance extraction. Implementation of a metasurface EM wave absorber was deployed on an FR4 Epoxy dielectric substrate with dimensions of 80-unit cells 80-unit cells and characterized with two horn antennas, which were connected to a signal generator as the transmitter and a spectrum analyzer as the receiver. In front of the horn antennas a device under test (DUT) was installed, i.e., a metasurface EM wave absorber and a metal plate with similar dimensions. The metal plate was expected to perform full reflection at the same distance and antenna orientation. The same condition was used as a normalization factor to optimize the absorption of the metasurface EM wave absorber. The characterization results showed that the minimum normalized absorption of the SRR and stripline at the designated measurement distances was 0.99, 0.99, 0.99, and 0.97, at frequencies of 8.85 GHz, 9.08 GHz, 9.15 GHz, and 9.10 GHz, respectively, and a antenna orientation.

Keywords

Collaboration network of the authors

21 authors · 38 co-authorship links · 21 across different organisations

Hover or tap a name to highlight its co-authors. Double-click to open the author's page.

  • Bandung Institute of Technology
  • Telkom University
  • State University of Jakarta
  • Indonesian Institute of Sciences
  • Pakuan University
  • Universitas Sangga Buana YPKP
  • Sumatera Institute of Technology
  • Other organisations
  • Different organisations
  • Same organisation
  • Affiliation unknown
  • Thicker line = more joint articles · bigger circle = more articles
Show as table
Co-authorOrganisationJoint articles
Yana TaryanaIndonesian Institute of Sciences2
Mochamad YunusPakuan University2
Hardi NusantaraBandung Institute of Technology2
Rheyuniarto Sahlendar AsthanSumatera Institute of Technology2
Sugihartono SugihartonoBandung Institute of Technology1
Adit KurniawanBandung Institute of Technology1
Baso MaruddaniState University of Jakarta1
Dida Tuhu PutrantoTelkom University1
Heroe WijantoTelkom University1
Hartuti MistialustinaUniversitas Sangga Buana YPKP1
Chairunnisa ChairunnisaBandung Institute of Technology1
Zulfi ZulfiBandung Institute of Technology1
Joko SuryanaBandung Institute of Technology1
Muhammad ShalahuddinUniversitas Teknologi Bandung1
Wikan Danar SunindyoBandung Institute of Technology1
Kridanto SurendroBandung Institute of Technology1
Agus Dwi PrasetyoBandung Institute of Technology1
Deny HamdaniBandung Institute of Technology1

Affiliations come from OpenAlex; journal OAI-PMH metadata carries none. Authors without an OpenAlex ID are matched by name, which can merge or split people.

Metadata source: OAI-PMH (metadata jurnal) https://journals.itb.ac.id/index.php/jictra/oai, first harvested 26 Okt 2026, last seen 26 Okt 2026.
Original metadata (oai_dc) 
<oai_dc:dc xmlns="http://www.openarchives.org/OAI/2.0/" xmlns:dc="http://purl.org/dc/elements/1.1/" xmlns:oai_dc="http://www.openarchives.org/OAI/2.0/oai_dc/" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:schemaLocation="http://www.openarchives.org/OAI/2.0/oai_dc/  http://www.openarchives.org/OAI/2.0/oai_dc.xsd">
	<dc:title xml:lang="en-US">X-Band Metasurface EM Wave Absorber using SRR and Stripline: Model, Design and Implementation</dc:title>
	<dc:creator>Syihabuddin, Budi</dc:creator>
	<dc:creator>Ridwan Effendi, Mohammad</dc:creator>
	<dc:creator>Munir, Achmad</dc:creator>
	<dc:subject xml:lang="en-US">free space measurement</dc:subject>
	<dc:subject xml:lang="en-US">horn antenna</dc:subject>
	<dc:subject xml:lang="en-US">normalized absorption</dc:subject>
	<dc:subject xml:lang="en-US">SRR with stripline</dc:subject>
	<dc:subject xml:lang="en-US">x-band wave absorber</dc:subject>
	<dc:subject xml:lang="en-US">x-band wave absorber, free space measurement, SRR with stripline, normalized absorption, horn antenna</dc:subject>
	<dc:description xml:lang="en-US">This paper presents a model, design, and implementation of a metasurface electromagnetic (EM) wave absorber for operation in the frequency range of the X-band. The model of the metasurface was constructed with a split ring resonator (SSR) and a stripline and it was designed with a single unit cell, whereby the results were approached with transmission line theory for patch impedance extraction. Implementation of a metasurface EM wave absorber was deployed on an FR4 Epoxy dielectric substrate with dimensions of 80-unit cells  80-unit cells and characterized with two horn antennas, which were connected to a signal generator as the transmitter and a spectrum analyzer as the receiver. In front of the horn antennas a device under test (DUT) was installed, i.e., a metasurface EM wave absorber and a metal plate with similar dimensions. The metal plate was expected to perform full reflection at the same distance and antenna orientation. The same condition was used as a normalization factor to optimize the absorption of the metasurface EM wave absorber. The characterization results showed that the minimum normalized absorption of the SRR and stripline at the designated measurement distances was 0.99, 0.99, 0.99, and 0.97, at frequencies of 8.85 GHz, 9.08 GHz, 9.15 GHz, and 9.10 GHz, respectively, and a  antenna orientation.</dc:description>
	<dc:publisher xml:lang="en-US">DRI - ITB</dc:publisher>
	<dc:date>2024-10-31</dc:date>
	<dc:type>info:eu-repo/semantics/article</dc:type>
	<dc:type>info:eu-repo/semantics/publishedVersion</dc:type>
	<dc:type xml:lang="en-US">Peer-reviewed Article</dc:type>
	<dc:format>application/pdf</dc:format>
	<dc:identifier>https://journals.itb.ac.id/index.php/jictra/article/view/23534</dc:identifier>
	<dc:identifier>10.5614/itbj.ict.res.appl.2023.18.2.6</dc:identifier>
	<dc:source xml:lang="en-US">Journal of ICT Research and Applications; Vol. 18 No. 2 (2024); 155-174</dc:source>
	<dc:source>2338-5499</dc:source>
	<dc:source>2337-5787</dc:source>
	<dc:source>10.5614/itbj.ict.res.appl.2023.18.2</dc:source>
	<dc:language>eng</dc:language>
	<dc:relation>https://journals.itb.ac.id/index.php/jictra/article/view/23534/6787</dc:relation>
	<dc:rights xml:lang="en-US">Copyright (c) 2024 Journal of ICT Research and Applications</dc:rights>
</oai_dc:dc>