Melola Discovery

← Melola Discovery

Jurnal Tanpa peringkat SINTA

The effect of replacing standard carburetor with PE-28 carburetor on performance fuel consumption on 2006 Honda Tiger Revo

Journal of Applied Mechanical Engineering and Green Technology · Vol. 2 No. 3 (2021) · hlm. 97–101

DOI
10.31940/jametech.v2i3.97-101
ISSN
2684-8201, 2655-9145
Terbit
2021-11-30
Penerbit
Unit Publikasi Ilmiah, P3M, Politeknik Negeri Bali
Bahasa
eng

Abstrak

Carburetors are one of the important components on motorcycles, through modification of replacing Standard Carburetor with Racing Carburetor is one of the ways to improve engine performance. There are several types and sizes of PE, namely PE 24, PE 28, PE 38. PE 28 carburetor is often used on racing motorbikes, both Drag bikes and Roodrace bikes, where this carburetor is able to produce maximum engine performance. By testing the maximum power using a standard carburetor found at 7000 rpm engine speed, which is 11.3 HP, while the maximum power testing using a PE 28 carburetor is found at 7000 rpm engine speed, which is 11.7 HP. For testing the maximum torque using a standard carburetor found at 6000 rpm engine speed, which is 11.7 N.m, while the maximum torque testing using a PE 28 carburetor is found at 7000 rpm engine speed, which is 11.8 N.m. The use of PE 28 carburetor on a 4 stroke motorcycle greatly affects the amount of fuel consumption, it is because the PE 28 carburetor is a racing carburetor that is very suitable for those who want top speed. In addition, the advantage of the PE 28 carburetor is that it is able to improve engine performance because the type of carburetor is different from the standard and there are changes in the dimensions of the venturi hole and intake manifold, so that it can fog up more air and fuel to be brought into the combustion chamber or into the engine cylinder.

Kata kunci

Jaringan kolaborasi para penulis

26 penulis · 59 tautan kepenulisan bersama · 9 lintas organisasi

Arahkan kursor atau ketuk sebuah nama untuk menyorot rekan penulisnya. Klik dua kali untuk membuka halaman penulis.

  • Politeknik Negeri Bali
  • Warmadewa University
  • Afiliasi tidak diketahui
  • Organisasi berbeda
  • Organisasi sama
  • Afiliasi tidak diketahui
  • Garis lebih tebal = lebih banyak artikel bersama · lingkaran lebih besar = lebih banyak artikel
Tampilkan sebagai tabel
Rekan penulisOrganisasiArtikel bersama
I Nyoman GunungPoliteknik Negeri Bali8
Kadek Agus Mahabojana D.P.Warmadewa University7
I Nengah Darma SusilaPoliteknik Negeri Bali4
I Ketut SuhermanPoliteknik Negeri Bali3
Achmad WiboloPoliteknik Negeri Bali3
Daud Simon AnakottaparyPoliteknik Negeri Bali3
Made Dika NugrahaWarmadewa University3
I Putu DarmawaPoliteknik Negeri Bali3
I Ketut AdiPoliteknik Negeri Bali2
Kasiani KasianiAfiliasi tidak diketahui1
A.A Ayu Mirah KencanawatiAfiliasi tidak diketahui1
I Made Anom AdiaksaPoliteknik Negeri Bali1
Gusti Ngurah ArdanaPoliteknik Negeri Bali1
Nyoman SutarnaPoliteknik Negeri Bali1
I Ketut SutapaPoliteknik Negeri Bali1
I Made AryanaAfiliasi tidak diketahui1
I Gusti Ngurah ArdanaPoliteknik Negeri Bali1
Kadek Agus Mahabojana Dwi PrayogaWarmadewa University1
Nyoman Angga PrabawaWarmadewa University1
I Gede Oka AdnyanaAfiliasi tidak diketahui1
I Ketut SutapaPoliteknik Negeri Bali1
I Ketut Arta WidanaPoliteknik Negeri Bali1
Ni Wayan SadiyaniPoliteknik Negeri Bali1

Afiliasi berasal dari OpenAlex; metadata OAI-PMH jurnal tidak memuatnya. Penulis tanpa ID OpenAlex dicocokkan berdasarkan nama, sehingga dua orang bisa tergabung atau satu orang bisa terpisah.

Sumber metadata: OAI-PMH (metadata jurnal) https://ojs2.pnb.ac.id/index.php/JAMETECH/oai, pertama di-harvest 19 Nov 2026, terakhir terlihat 19 Nov 2026.
Metadata asli (oai_dc)
<oai_dc:dc xmlns="http://www.openarchives.org/OAI/2.0/" xmlns:dc="http://purl.org/dc/elements/1.1/" xmlns:oai_dc="http://www.openarchives.org/OAI/2.0/oai_dc/" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:schemaLocation="http://www.openarchives.org/OAI/2.0/oai_dc/  http://www.openarchives.org/OAI/2.0/oai_dc.xsd">
	<dc:title xml:lang="en-US">The effect of replacing standard carburetor with PE-28 carburetor on performance fuel consumption on 2006 Honda Tiger Revo</dc:title>
	<dc:creator>Antara, I Nengah Ludra </dc:creator>
	<dc:creator>Sutarna, I Nyoman </dc:creator>
	<dc:creator>Indra, Ida Bagus Puspa </dc:creator>
	<dc:subject xml:lang="en-US">carburetor</dc:subject>
	<dc:subject xml:lang="en-US">performance and fuel</dc:subject>
	<dc:subject xml:lang="en-US">Honda Tiger Revo 2006</dc:subject>
	<dc:description xml:lang="en-US">Carburetors are one of the important components on motorcycles, through modification of replacing Standard Carburetor with Racing Carburetor is one of the ways to improve engine performance. There are several types and sizes of PE, namely PE 24, PE 28, PE 38. PE 28 carburetor is often used on racing motorbikes, both Drag bikes and Roodrace bikes, where this carburetor is able to produce maximum engine performance. By testing the maximum power using a standard carburetor found at 7000 rpm engine speed, which is 11.3 HP, while the maximum power testing using a PE 28 carburetor is found at 7000 rpm engine speed, which is 11.7 HP. For testing the maximum torque using a standard carburetor found at 6000 rpm engine speed, which is 11.7 N.m, while the maximum torque testing using a PE 28 carburetor is found at 7000 rpm engine speed, which is 11.8 N.m. The use of PE 28 carburetor on a 4 stroke motorcycle greatly affects the amount of fuel consumption, it is because the PE 28 carburetor is a racing carburetor that is very suitable for those who want top speed. In addition, the advantage of the PE 28 carburetor is that it is able to improve engine performance because the type of carburetor is different from the standard and there are changes in the dimensions of the venturi hole and intake manifold, so that it can fog up more air and fuel to be brought into the combustion chamber or into the engine cylinder.</dc:description>
	<dc:publisher xml:lang="en-US">Unit Publikasi Ilmiah, P3M, Politeknik Negeri Bali</dc:publisher>
	<dc:date>2021-11-30</dc:date>
	<dc:type>info:eu-repo/semantics/article</dc:type>
	<dc:type>info:eu-repo/semantics/publishedVersion</dc:type>
	<dc:type xml:lang="en-US">Peer-reviewed Article</dc:type>
	<dc:format>application/pdf</dc:format>
	<dc:identifier>https://ojs2.pnb.ac.id/index.php/JAMETECH/article/view/223</dc:identifier>
	<dc:identifier>10.31940/jametech.v2i3.97-101</dc:identifier>
	<dc:source xml:lang="en-US"> Journal of Applied Mechanical Engineering and Green Technology; Vol. 2 No. 3 (2021): November 2021; 97-101</dc:source>
	<dc:source>2684-8201</dc:source>
	<dc:source>2655-9145</dc:source>
	<dc:source>10.31940/jametech.v2i3</dc:source>
	<dc:language>eng</dc:language>
	<dc:relation>https://ojs2.pnb.ac.id/index.php/JAMETECH/article/view/223/127</dc:relation>
	<dc:rights xml:lang="en-US">Copyright (c) 2022  Journal of Applied Mechanical Engineering and Green Technology</dc:rights>
	<dc:rights xml:lang="en-US">https://scholar.google.com/citations?hl=en&amp;view_op=list_works&amp;authuser=2&amp;gmla=AJsN-F5k01DNihBDbooUvlNxExv-WhpB3DyY0tjGvHKGcOovATy6tUweEZBP3T70BKOQ_1Vu8vDBsjKH91JWXJ8-wUV3JCO9xIjSPLsxXRi8L5d6dn6VJWk&amp;user=PhqmFRYAAAAJ</dc:rights>
</oai_dc:dc>