Melola Discovery

← Melola Discovery

Jurnal Tanpa peringkat SINTA

Motorcycle wheel rim press tool design

Journal of Applied Mechanical Engineering and Green Technology · Vol. 3 No. 1 (2022) · hlm. 24–30

DOI
10.31940/jametech.v3i1.24-30
ISSN
2684-8201, 2655-9145
Terbit
2022-03-31
Penerbit
Unit Publikasi Ilmiah, P3M, Politeknik Negeri Bali
Bahasa
eng

Abstrak

In motor vehicles, especially motorcycles, sometimes there are a lot of problems with the wheel rim in the event of an accident, or hit by a pothole that causes the wheel rim to be dented. In this case, we design a motorcycle wheel rim press tool as shown in Figure 2.1. The things that must be considered for a tool design in material selection are hardness, strength, fragility. The types of materials used are carbon steel, alloy steel, hollow steel, U iron, axle iron, angle iron, plate iron. In general, there are several grades of iron, including JIS G3101 SS400, ASTMA 36; BS 4360; DIN 17 100JIS G 3101; JIS 3106; SNI 07 2054, which has a different maximum tensile strength or stress by using formulas, for example the calculation of shafts, levers, weld strength and selection of hydraulic jacks. Supporting instruments in the process of working on the wheel rim press tool are machine tools and other measuring tools. To obtain truly satisfactory results from a tool, we are required to observe and look for alternatives and as carefully as possible in order to achieve a result that meets the standard. The tool must have high efficiency, easy to operate, and uphold work safety. Based on the results of the design and testing of the design of this motorcycle wheel rim press tool, it is more efficient, fast, and precise when compared to the tools owned by David Jaya Motor's workshop. The time required is faster according to the test results, which is between 25 minutes to 40 minutes with different wheel rim damage cases, while manually at the David Jaya Motor workshop, from observing field test results it takes a minimum of 90 minutes.

Kata kunci

Jaringan kolaborasi para penulis

37 penulis · 90 tautan kepenulisan bersama · 9 lintas organisasi

Arahkan kursor atau ketuk sebuah nama untuk menyorot rekan penulisnya. Klik dua kali untuk membuka halaman penulis.

  • Politeknik Negeri Bali
  • Warmadewa University
  • Afiliasi tidak diketahui
  • Organisasi berbeda
  • Organisasi sama
  • Afiliasi tidak diketahui
  • Garis lebih tebal = lebih banyak artikel bersama · lingkaran lebih besar = lebih banyak artikel
Tampilkan sebagai tabel
Rekan penulisOrganisasiArtikel bersama
Kadek Agus Mahabojana D.P.Warmadewa University8
I Nengah Darma SusilaPoliteknik Negeri Bali4
Made Dika NugrahaWarmadewa University4
I Putu DarmawaPoliteknik Negeri Bali4
I Ketut SuhermanPoliteknik Negeri Bali3
Achmad WiboloPoliteknik Negeri Bali3
Daud Simon AnakottaparyPoliteknik Negeri Bali3
I Ketut RimpungPoliteknik Negeri Bali2
I Ketut AdiPoliteknik Negeri Bali2
Nyoman SutarnaPoliteknik Negeri Bali2
Kasiani KasianiAfiliasi tidak diketahui1
A.A Ayu Mirah KencanawatiAfiliasi tidak diketahui1
I Putu Gede Sopan RahtikaPoliteknik Negeri Bali1
Anak Agung Ngurah Bagus MulawarmanPoliteknik Negeri Bali1
I N. G. SastrawanPoliteknik Negeri Bali1
Bagus RadityaPoliteknik Negeri Bali1
I Made Anom AdiaksaPoliteknik Negeri Bali1
Gusti Ngurah ArdanaPoliteknik Negeri Bali1
Putu DarmawaPoliteknik Negeri Bali1
Ludra AntaraPoliteknik Negeri Bali1
Luh Putu Ike MidianiPoliteknik Negeri Bali1
Ketut BangsePoliteknik Negeri Bali1
I Made Duta IrawanPoliteknik Negeri Bali1
I Komang RusmariadiPoliteknik Negeri Bali1
I Ketut SutapaPoliteknik Negeri Bali1
I Made AryanaAfiliasi tidak diketahui1
I Gusti Ngurah ArdanaPoliteknik Negeri Bali1
Kadek Agus Mahabojana Dwi PrayogaWarmadewa University1
Nyoman Angga PrabawaWarmadewa University1
I Gede Oka AdnyanaAfiliasi tidak diketahui1
I Ketut SutapaPoliteknik Negeri Bali1
I Ketut Arta WidanaPoliteknik Negeri Bali1
Ni Wayan SadiyaniPoliteknik Negeri Bali1

Afiliasi berasal dari OpenAlex; metadata OAI-PMH jurnal tidak memuatnya. Penulis tanpa ID OpenAlex dicocokkan berdasarkan nama, sehingga dua orang bisa tergabung atau satu orang bisa terpisah.

Sumber metadata: OAI-PMH (metadata jurnal) https://ojs2.pnb.ac.id/index.php/JAMETECH/oai, pertama di-harvest 19 Nov 2026, terakhir terlihat 19 Nov 2026.
Metadata asli (oai_dc)
<oai_dc:dc xmlns="http://www.openarchives.org/OAI/2.0/" xmlns:dc="http://purl.org/dc/elements/1.1/" xmlns:oai_dc="http://www.openarchives.org/OAI/2.0/oai_dc/" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:schemaLocation="http://www.openarchives.org/OAI/2.0/oai_dc/  http://www.openarchives.org/OAI/2.0/oai_dc.xsd">
	<dc:title xml:lang="en-US">Motorcycle wheel rim press tool design</dc:title>
	<dc:creator>Ludra Antara, I Nengah</dc:creator>
	<dc:creator>Sutarna, I Nyoman</dc:creator>
	<dc:creator>Puspa Indra, Ida Bagus</dc:creator>
	<dc:creator>Gunung, I Nyoman</dc:creator>
	<dc:subject xml:lang="en-US">Design</dc:subject>
	<dc:subject xml:lang="en-US">motorcycle</dc:subject>
	<dc:subject xml:lang="en-US">wheel rim</dc:subject>
	<dc:subject xml:lang="en-US">press tool</dc:subject>
	<dc:description xml:lang="en-US">In motor vehicles, especially motorcycles, sometimes there are a lot of problems with the wheel rim in the event of an accident, or hit by a pothole that causes the wheel rim to be dented. In this case, we design a motorcycle wheel rim press tool as shown in Figure 2.1. The things that must be considered for a tool design in material selection are hardness, strength, fragility. The types of materials used are carbon steel, alloy steel, hollow steel, U iron, axle iron, angle iron, plate iron. In general, there are several grades of iron, including JIS G3101 SS400, ASTMA 36; BS 4360; DIN 17 100JIS G 3101; JIS 3106; SNI 07 2054, which has a different maximum tensile strength or stress by using formulas, for example the calculation of shafts, levers, weld strength and selection of hydraulic jacks. Supporting instruments in the process of working on the wheel rim press tool are machine tools and other measuring tools. To obtain truly satisfactory results from a tool, we are required to observe and look for alternatives and as carefully as possible in order to achieve a result that meets the standard. The tool must have high efficiency, easy to operate, and uphold work safety. Based on the results of the design and testing of the design of this motorcycle wheel rim press tool, it is more efficient, fast, and precise when compared to the tools owned by David Jaya Motor's workshop. The time required is faster according to the test results, which is between 25 minutes to 40 minutes with different wheel rim damage cases, while manually at the David Jaya Motor workshop, from observing field test results it takes a minimum of 90 minutes.</dc:description>
	<dc:publisher xml:lang="en-US">Unit Publikasi Ilmiah, P3M, Politeknik Negeri Bali</dc:publisher>
	<dc:date>2022-03-31</dc:date>
	<dc:type>info:eu-repo/semantics/article</dc:type>
	<dc:type>info:eu-repo/semantics/publishedVersion</dc:type>
	<dc:type xml:lang="en-US">Peer-reviewed Article</dc:type>
	<dc:format>application/pdf</dc:format>
	<dc:identifier>https://ojs2.pnb.ac.id/index.php/JAMETECH/article/view/440</dc:identifier>
	<dc:identifier>10.31940/jametech.v3i1.24-30</dc:identifier>
	<dc:source xml:lang="en-US"> Journal of Applied Mechanical Engineering and Green Technology; Vol. 3 No. 1 (2022): March 2022; 24-30</dc:source>
	<dc:source>2684-8201</dc:source>
	<dc:source>2655-9145</dc:source>
	<dc:source>10.31940/jametech.v3i1</dc:source>
	<dc:language>eng</dc:language>
	<dc:relation>https://ojs2.pnb.ac.id/index.php/JAMETECH/article/view/440/235</dc:relation>
	<dc:rights xml:lang="en-US">Copyright (c) 2022  Journal of Applied Mechanical Engineering and Green Technology</dc:rights>
	<dc:rights xml:lang="en-US">https://scholar.google.com/citations?hl=en&amp;view_op=list_works&amp;authuser=2&amp;gmla=AJsN-F5k01DNihBDbooUvlNxExv-WhpB3DyY0tjGvHKGcOovATy6tUweEZBP3T70BKOQ_1Vu8vDBsjKH91JWXJ8-wUV3JCO9xIjSPLsxXRi8L5d6dn6VJWk&amp;user=PhqmFRYAAAAJ</dc:rights>
</oai_dc:dc>