Melola Discovery

← Melola Discovery

Jurnal Tanpa peringkat SINTA

Effect of Heating Temperature on Pyrolysis Oil Yield from Waste Tires Using a Two-Stage Condensation System

Journal of Applied Mechanical Engineering and Green Technology · Vol. 4 No. 2 (2026) · hlm. 65–68

DOI
10.31940/jametech.v4i2.65-68
ISSN
2684-8201, 2655-9145
Terbit
2026-10-22
Penerbit
Unit Publikasi Ilmiah, P3M, Politeknik Negeri Bali
Bahasa
eng

Abstrak

Waste tires are difficult to manage because the cross-linked structure of vulcanized rubber resists natural degradation. This study experimentally investigates the effect of heating temperature on pyrolysis-oil recovery using a batch reactor coupled with a two-stage condensation system. A 2 kg waste-tire feed was processed for 60 min at 300, 325, and 350 °C. The evaluated parameters were cumulative oil volume, volumetric oil yield, oil distribution between condensers, and residual solid mass. The final cumulative oil volumes were approximately 350, 700, and 850 mL at 300, 325, and 350 °C, respectively. The volumetric oil yield increased from about 170 mL/kg at 300 °C to 350 mL/kg at 325 °C and 425 mL/kg at 350 °C. The first condenser recovered the dominant fraction of liquid product at all temperatures, while the second condenser provided additional liquid recovery. Residual solid mass decreased from approximately 1100 g at 300 °C to 490 g at 350 °C. The results demonstrate that heating temperature is an important operating parameter for improving liquid-product recovery from waste-tire pyrolysis.

Kata kunci

Jaringan kolaborasi para penulis

28 penulis · 97 tautan kepenulisan bersama · 1 lintas organisasi

Arahkan kursor atau ketuk sebuah nama untuk menyorot rekan penulisnya. Klik dua kali untuk membuka halaman penulis.

  • Politeknik Negeri Bali
  • Udayana University
  • Afiliasi tidak diketahui
  • Organisasi berbeda
  • Organisasi sama
  • Afiliasi tidak diketahui
  • Garis lebih tebal = lebih banyak artikel bersama · lingkaran lebih besar = lebih banyak artikel
Tampilkan sebagai tabel
Rekan penulisOrganisasiArtikel bersama
I Wayan Suma WibawaPoliteknik Negeri Bali11
I Made Anom AdiaksaPoliteknik Negeri Bali5
I Made Anom AdiaksaPoliteknik Negeri Bali4
I Nyoman SupartaPoliteknik Negeri Bali4
Anak Agung Gede Pradnyana DiputraPoliteknik Negeri Bali4
I Wayan Agus Rantia DanaPoliteknik Negeri Bali4
A. A. Gede Pradnyana DiputraPoliteknik Negeri Bali2
I Made Anom AdiaksaPoliteknik Negeri Bali2
Agung PradnyanaPoliteknik Negeri Bali2
Risa Nurin BaitiPoliteknik Negeri Bali1
I Ketut SuhermanPoliteknik Negeri Bali1
I Wayan SuiryaPoliteknik Negeri Bali1
I Ketut AdiPoliteknik Negeri Bali1
I Gede Nyoman Suta WaisnawaPoliteknik Negeri Bali1
Made Ardikosa Satrya WibawaAfiliasi tidak diketahui1
I Gst. Ketut AbasanaAfiliasi tidak diketahui1
I Gede Putu AdipratamaAfiliasi tidak diketahui1
I Made RajendraPoliteknik Negeri Bali1
I Ketut Gde Juli SuarbawaPoliteknik Negeri Bali1
INS WinayaAfiliasi tidak diketahui1
I Nyoman Suprapta WinayaUdayana University1
I Made SuciptaAfiliasi tidak diketahui1
I Gede SantosaPoliteknik Negeri Bali1
Ketut AdiPoliteknik Negeri Bali1

Afiliasi berasal dari OpenAlex; metadata OAI-PMH jurnal tidak memuatnya. Penulis tanpa ID OpenAlex dicocokkan berdasarkan nama, sehingga dua orang bisa tergabung atau satu orang bisa terpisah.

Sumber metadata: OAI-PMH (metadata jurnal) https://ojs2.pnb.ac.id/index.php/JAMETECH/oai, pertama di-harvest 19 Nov 2026, terakhir terlihat 19 Nov 2026.
Metadata asli (oai_dc)
<oai_dc:dc xmlns="http://www.openarchives.org/OAI/2.0/" xmlns:dc="http://purl.org/dc/elements/1.1/" xmlns:oai_dc="http://www.openarchives.org/OAI/2.0/oai_dc/" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:schemaLocation="http://www.openarchives.org/OAI/2.0/oai_dc/  http://www.openarchives.org/OAI/2.0/oai_dc.xsd">
	<dc:title xml:lang="en-US">Effect of Heating Temperature on Pyrolysis Oil Yield from Waste Tires Using a Two-Stage Condensation System</dc:title>
	<dc:creator>Putrawan, I Made Agus</dc:creator>
	<dc:creator>Wibawa, Made Ardikosa Satrya</dc:creator>
	<dc:creator> Pradnyana Diputra, Anak Agung Gede</dc:creator>
	<dc:creator>Kantun, I Komang</dc:creator>
	<dc:subject xml:lang="en-US">waste tires</dc:subject>
	<dc:subject xml:lang="en-US">pyrolysis</dc:subject>
	<dc:subject xml:lang="en-US">pyrolysis oil</dc:subject>
	<dc:subject xml:lang="en-US">heating temperature</dc:subject>
	<dc:subject xml:lang="en-US">two-stage condensation</dc:subject>
	<dc:description xml:lang="en-US">Waste tires are difficult to manage because the cross-linked structure of vulcanized rubber resists natural degradation. This study experimentally investigates the effect of heating temperature on pyrolysis-oil recovery using a batch reactor coupled with a two-stage condensation system. A 2 kg waste-tire feed was processed for 60 min at 300, 325, and 350 °C. The evaluated parameters were cumulative oil volume, volumetric oil yield, oil distribution between condensers, and residual solid mass. The final cumulative oil volumes were approximately 350, 700, and 850 mL at 300, 325, and 350 °C, respectively. The volumetric oil yield increased from about 170 mL/kg at 300 °C to 350 mL/kg at 325 °C and 425 mL/kg at 350 °C. The first condenser recovered the dominant fraction of liquid product at all temperatures, while the second condenser provided additional liquid recovery. Residual solid mass decreased from approximately 1100 g at 300 °C to 490 g at 350 °C. The results demonstrate that heating temperature is an important operating parameter for improving liquid-product recovery from waste-tire pyrolysis.</dc:description>
	<dc:publisher xml:lang="en-US">Unit Publikasi Ilmiah, P3M, Politeknik Negeri Bali</dc:publisher>
	<dc:date>2026-10-22</dc:date>
	<dc:type>info:eu-repo/semantics/article</dc:type>
	<dc:type>info:eu-repo/semantics/publishedVersion</dc:type>
	<dc:type xml:lang="en-US">Peer-reviewed Article</dc:type>
	<dc:format>application/pdf</dc:format>
	<dc:identifier>https://ojs2.pnb.ac.id/index.php/JAMETECH/article/view/3415</dc:identifier>
	<dc:identifier>10.31940/jametech.v4i2.65-68</dc:identifier>
	<dc:source xml:lang="en-US"> Journal of Applied Mechanical Engineering and Green Technology; Vol. 4 No. 2 (2026): Oktober; 65-68</dc:source>
	<dc:source>2684-8201</dc:source>
	<dc:source>2655-9145</dc:source>
	<dc:source>10.31940/jametech.v4i2</dc:source>
	<dc:language>eng</dc:language>
	<dc:relation>https://ojs2.pnb.ac.id/index.php/JAMETECH/article/view/3415/1598</dc:relation>
	<dc:rights xml:lang="en-US">Copyright (c) 2026  Journal of Applied Mechanical Engineering and Green Technology</dc:rights>
	<dc:rights xml:lang="en-US">https://scholar.google.com/citations?hl=en&amp;view_op=list_works&amp;authuser=2&amp;gmla=AJsN-F5k01DNihBDbooUvlNxExv-WhpB3DyY0tjGvHKGcOovATy6tUweEZBP3T70BKOQ_1Vu8vDBsjKH91JWXJ8-wUV3JCO9xIjSPLsxXRi8L5d6dn6VJWk&amp;user=PhqmFRYAAAAJ</dc:rights>
</oai_dc:dc>