Melola Discovery

← Melola Discovery

Jurnal SINTA 3

The Effect of Material Conveyances on Workload, Musculoskeletal Disorders, Productivity and Performance in the Process of Plate Cutting

Logic: Jurnal Rancang Bangun dan Teknologi · Vol. 21 No. 3 (2021) · hlm. 197–204

DOI
10.31940/logic.v21i3.197-204
ISSN
2580-5649, 1412-114X
Terbit
2021-11-30
Penerbit
Unit Publikasi Ilmiah, P3M, Politeknik Negeri Bali
Bahasa
eng

Abstrak

The use of material conveyances that are not in accordance with the concept of ergonomics harm the human body. Repair of work brushes by applying ergonomics to material conveyances can reduce the risk category. The purpose of this study was to determine the effect of material conveyance on reducing workload, musculoskeletal disorders, increasing productivity and performance. The study was conducted using the same subject design method with a sample of 16 workers. The data were analyzed by paired t-test with a significant level of p<0.05. The results of the analysis showed that the PO workload data was 104.4 beats per minute, P1 was 93.5 beats per minute there was a decrease of 10.9 beats per minute or 10.4%, PO musculoskeletal complaints were 80.1 scores, P1 was 70.0 the scores were decreased by 10.1 or 12.6%, PO productivity of 0.201, P1 of 0.355, an increase of 0.154 or 43.4%. The conclusion is that the use of material conveyances means a decrease in workload, musculoskeletal disorders, an increase in productivity and performance. It is recommended to workers to use material conveyances equipment in carrying out transport and material transport activities.

Kata kunci

Jaringan kolaborasi para penulis

31 penulis · 78 tautan kepenulisan bersama · 9 lintas organisasi

Arahkan kursor atau ketuk sebuah nama untuk menyorot rekan penulisnya. Klik dua kali untuk membuka halaman penulis.

  • Politeknik Negeri Bali
  • Warmadewa University
  • Afiliasi tidak diketahui
  • Organisasi berbeda
  • Organisasi sama
  • Afiliasi tidak diketahui
  • Garis lebih tebal = lebih banyak artikel bersama · lingkaran lebih besar = lebih banyak artikel
Tampilkan sebagai tabel
Rekan penulisOrganisasiArtikel bersama
Ida Bagus Puspa IndraPoliteknik Negeri Bali8
I Nyoman GunungPoliteknik Negeri Bali6
Kadek Agus Mahabojana D.P.Warmadewa University6
I Nengah Darma SusilaPoliteknik Negeri Bali4
I Ketut SuhermanPoliteknik Negeri Bali3
Achmad WiboloPoliteknik Negeri Bali3
Made Dika NugrahaWarmadewa University3
I Ketut AdiPoliteknik Negeri Bali2
I Putu DarmawaPoliteknik Negeri Bali2
Nyoman SutarnaPoliteknik Negeri Bali2
Kasiani KasianiAfiliasi tidak diketahui1
A.A Ayu Mirah KencanawatiAfiliasi tidak diketahui1
I Wayan Adi SubagiaPoliteknik Negeri Bali1
Putu Wijaya SunuPoliteknik Negeri Bali1
I Dewa Made SusilaPoliteknik Negeri Bali1
I Nengah ArditaPoliteknik Negeri Bali1
I Gede Artha NegaraPoliteknik Negeri Bali1
Luh Putu Ike MidianiPoliteknik Negeri Bali1
Edo KriswidiantoAfiliasi tidak diketahui1
I Wayan TemajaAfiliasi tidak diketahui1
I Ketut SutapaPoliteknik Negeri Bali1
I Made AryanaAfiliasi tidak diketahui1
I Gusti Ngurah ArdanaPoliteknik Negeri Bali1
Kadek Agus Mahabojana Dwi PrayogaWarmadewa University1
Nyoman Angga PrabawaWarmadewa University1
I Ketut SutapaPoliteknik Negeri Bali1
I Ketut Arta WidanaPoliteknik Negeri Bali1
Ni Wayan SadiyaniPoliteknik Negeri Bali1

Afiliasi berasal dari OpenAlex; metadata OAI-PMH jurnal tidak memuatnya. Penulis tanpa ID OpenAlex dicocokkan berdasarkan nama, sehingga dua orang bisa tergabung atau satu orang bisa terpisah.

Sumber metadata: OAI-PMH (metadata jurnal) https://ojs2.pnb.ac.id/index.php/LOGIC/oai, pertama di-harvest 19 Nov 2026, terakhir terlihat 19 Nov 2026.
Metadata asli (oai_dc)
<oai_dc:dc xmlns="http://www.openarchives.org/OAI/2.0/" xmlns:dc="http://purl.org/dc/elements/1.1/" xmlns:oai_dc="http://www.openarchives.org/OAI/2.0/oai_dc/" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:schemaLocation="http://www.openarchives.org/OAI/2.0/oai_dc/  http://www.openarchives.org/OAI/2.0/oai_dc.xsd">
	<dc:title xml:lang="en-US">The Effect of Material Conveyances on Workload, Musculoskeletal Disorders, Productivity and Performance in the Process of Plate Cutting</dc:title>
	<dc:creator>I Nyoman Sutarna</dc:creator>
	<dc:creator>I Nengah Ludra Antara</dc:creator>
	<dc:creator>Daud Simon Anakottapary</dc:creator>
	<dc:subject xml:lang="en-US">ergonomic</dc:subject>
	<dc:subject xml:lang="en-US">material conveyance</dc:subject>
	<dc:subject xml:lang="en-US">plate cutting process</dc:subject>
	<dc:description xml:lang="en-US">The use of material conveyances that are not in accordance with the concept of ergonomics harm the human body. Repair of work brushes by applying ergonomics to material conveyances can reduce the risk category. The purpose of this study was to determine the effect of material conveyance on reducing workload, musculoskeletal disorders, increasing productivity and performance.&amp;nbsp;The study was conducted using the same subject design method with a sample of 16 workers. The data were analyzed by paired t-test with a significant level of p&amp;lt;0.05. The results of the analysis showed that the PO workload data was 104.4 beats per minute, P1 was 93.5 beats per minute there was a decrease of 10.9 beats per minute or 10.4%, PO musculoskeletal complaints were 80.1 scores, P1 was 70.0 the scores were decreased by 10.1 or 12.6%, PO productivity of 0.201, P1 of 0.355, an increase of 0.154 or 43.4%.&amp;nbsp;The conclusion is that the use of material conveyances means a decrease in workload, musculoskeletal disorders, an increase in productivity and performance. It is recommended to workers to use material conveyances equipment in carrying out transport and material transport activities.</dc:description>
	<dc:publisher xml:lang="en-US">Unit Publikasi Ilmiah, P3M, Politeknik Negeri Bali</dc:publisher>
	<dc:date>2021-11-30</dc:date>
	<dc:type>info:eu-repo/semantics/article</dc:type>
	<dc:type>info:eu-repo/semantics/publishedVersion</dc:type>
	<dc:format>application/pdf</dc:format>
	<dc:identifier>https://ojs2.pnb.ac.id/index.php/LOGIC/article/view/96</dc:identifier>
	<dc:identifier>10.31940/logic.v21i3.197-204</dc:identifier>
	<dc:source xml:lang="en-US"> Logic : Jurnal Rancang Bangun dan Teknologi; Vol. 21 No. 3 (2021): November; 197-204</dc:source>
	<dc:source>2580-5649</dc:source>
	<dc:source>1412-114X</dc:source>
	<dc:source>10.31940/logic.v21i3</dc:source>
	<dc:language>eng</dc:language>
	<dc:relation>https://ojs2.pnb.ac.id/index.php/LOGIC/article/view/96/46</dc:relation>
	<dc:rights xml:lang="en-US">Copyright (c) 2021  Logic : Jurnal Rancang Bangun dan Teknologi</dc:rights>
	<dc:rights xml:lang="en-US">https://scholar.google.co.id/citations?user=smBuD3gAAAAJ&amp;hl=id</dc:rights>
</oai_dc:dc>