Melola Discovery

← Melola Discovery

Jurnal SINTA 3

Effect of Material Type and Minimum Diameter of Specimens on the Fatigue Life

Logic: Jurnal Rancang Bangun dan Teknologi · Vol. 21 No. 3 (2021) · hlm. 205–211

DOI
10.31940/logic.v21i3.205-211
ISSN
2580-5649, 1412-114X
Terbit
2021-11-30
Penerbit
Unit Publikasi Ilmiah, P3M, Politeknik Negeri Bali
Bahasa
eng

Abstrak

The obstacle faced during the fatigue test is the waiting time which is quite long and inefficient, especially for test specimens made of ductile metal with waiting times of up to several days. The research method includes reducing the specimen radius to obtain a flexural stress approaching 400 MPa which was originally 229 MPa from a radius of 254 mm to 240 mm with the results of turning the original specimen obtained a minimum diameter of 8.6 mm is reduced to 7.3 mm at a maximum loading of 10 kg. Results of the research are brass specimens C3604BD type with a minimum diameter of 8.6 mm at a flexural stress of 298 MPa showing a fatigue life of 2455546 cycles with a test duration of 1754 minutes and a minimum specimen diameter of 7.3 mm at a flexural stress of 299 MPa showing a fatigue life of 684311 cycles with a test duration of 489 minutes which means that with a minimum specimen diameter of 7.3 mm the fatigue life is 3.59 times shorter than a minimum specimen diameter of 8.6 mm. Meanwhile, for aluminium AA1101 type with a minimum specimen diameter of 7.3 mm at a flexural stress of 182 MPa, the fatigue life is 422117 cycles with a test duration of 278 minutes and with a minimum specimen diameter of 8.6 mm at a flexural stress of 183 MPa, the fatigue life is 389232 cycles with a test duration of 302 minutes which means that with a minimum specimen diameter of 7.3 mm the fatigue life is 1.05 times shorter than the minimum specimen diameter of 8.6 mm or almost the same.

Kata kunci

Jaringan kolaborasi para penulis

40 penulis · 137 tautan kepenulisan bersama · 70 lintas organisasi · menampilkan 40 yang paling banyak terhubung

Arahkan kursor atau ketuk sebuah nama untuk menyorot rekan penulisnya. Klik dua kali untuk membuka halaman penulis.

  • Politeknik Negeri Malang
  • Politeknik Elektronika Negeri Surabaya
  • Lambung Mangkurat University
  • University of Sarjanawiyata Tamansiswa
  • Politeknik Pertanian Negeri Pangkajene Kepulauan
  • Politeknik Surabaya
  • Siliwangi University
  • Organisasi lain
  • Afiliasi tidak diketahui
  • Organisasi berbeda
  • Organisasi sama
  • Afiliasi tidak diketahui
  • Garis lebih tebal = lebih banyak artikel bersama · lingkaran lebih besar = lebih banyak artikel
Tampilkan sebagai tabel
Rekan penulisOrganisasiArtikel bersama
Andri SetiawanPoliteknik Negeri Malang3
Bayu PranotoPoliteknik Negeri Malang3
R.N. Akhsanu TakwimPoliteknik Negeri Malang2
Muslimin MusliminJakarta State Polytechnic2
Muhammad RiyadiPoliteknik Pertanian Negeri Pangkajene Kepulauan1
Irawan IlhamPoliteknik Pertanian Negeri Pangkajene Kepulauan1
Eko Sulkhany YuliantoSiliwangi University1
Tito Aji MilleniawanUniversity of Sarjanawiyata Tamansiswa1
Mohammad Ahyar Syafwan LysanderUniversity of Sarjanawiyata Tamansiswa1
Shahnur Al-HafriUniversity of Sarjanawiyata Tamansiswa1
Didik SubiyantoUniversity of Sarjanawiyata Tamansiswa1
Tri Aji PurnomoUniversity of Sarjanawiyata Tamansiswa1
Arya Rafi AbrariPoliteknik Elektronika Negeri Surabaya1
Teguh Hady AriwibowoPoliteknik Elektronika Negeri Surabaya1
Lucky Pradigta Setiya RaharjaPoliteknik Elektronika Negeri Surabaya1
Satworo AdiwidodoPoliteknik Negeri Malang1
Fengky Adie PerdanaPoliteknik Negeri Malang1
Burniadi MoballaPoliteknik Surabaya1
Muh. Anis MustaghfirinPoliteknik Surabaya1
Muhammad Aghist FitronyPohang University of Science and Technology1
Charitsma TsaniPoliteknik Elektronika Negeri Surabaya1
Probo Yekti Salsabilla AdelwisePoliteknik Elektronika Negeri Surabaya1
Putri Dwi ImandiniPoliteknik Elektronika Negeri Surabaya1
Nanang QosimPoliteknik Negeri Malang1
Am. MufarrihPoliteknik Negeri Malang1
Zakki Fuadi EmzainPoliteknik Negeri Malang1
Ika SumantriLambung Mangkurat University1
Ali AgusUniversitas Gadjah Mada1
Habibah HabibahLambung Mangkurat University1
Nur FaizahLambung Mangkurat University1
Kharisma Julia WulandariLambung Mangkurat University1
Aji TisaPoliteknik Negeri Malang1

Afiliasi berasal dari OpenAlex; metadata OAI-PMH jurnal tidak memuatnya. Penulis tanpa ID OpenAlex dicocokkan berdasarkan nama, sehingga dua orang bisa tergabung atau satu orang bisa terpisah.

Sumber metadata: OAI-PMH (metadata jurnal) https://ojs2.pnb.ac.id/index.php/LOGIC/oai, pertama di-harvest 19 Nov 2026, terakhir terlihat 19 Nov 2026.
Metadata asli (oai_dc)
<oai_dc:dc xmlns="http://www.openarchives.org/OAI/2.0/" xmlns:dc="http://purl.org/dc/elements/1.1/" xmlns:oai_dc="http://www.openarchives.org/OAI/2.0/oai_dc/" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:schemaLocation="http://www.openarchives.org/OAI/2.0/oai_dc/  http://www.openarchives.org/OAI/2.0/oai_dc.xsd">
	<dc:title xml:lang="en-US">Effect  of Material Type and Minimum Diameter of Specimens on the Fatigue Life</dc:title>
	<dc:creator>Hadi, Syamsul</dc:creator>
	<dc:creator>Anggit Murdani</dc:creator>
	<dc:creator>Sudarmadji</dc:creator>
	<dc:creator>Andhika Erlangga Setiawan Putra</dc:creator>
	<dc:creator>Bambang Irawan</dc:creator>
	<dc:creator>Hangga Wicaksono</dc:creator>
	<dc:creator>Sza Sya Monica Valeria</dc:creator>
	<dc:creator>Nila Alia</dc:creator>
	<dc:subject xml:lang="en-US">fatigue test</dc:subject>
	<dc:subject xml:lang="en-US">rotating bending</dc:subject>
	<dc:subject xml:lang="en-US">C3604BD brass</dc:subject>
	<dc:subject xml:lang="en-US">AA1101 aluminum</dc:subject>
	<dc:subject xml:lang="en-US">copy lathe</dc:subject>
	<dc:subject xml:lang="en-US">specimen profile radius</dc:subject>
	<dc:subject xml:lang="en-US">testing time</dc:subject>
	<dc:description xml:lang="en-US">The obstacle faced during the fatigue test is the waiting time which is quite long and inefficient, especially for test specimens made of ductile metal with waiting times of up to several days. The research method includes reducing the specimen radius to obtain a flexural stress approaching 400 MPa which was originally 229 MPa from a radius of 254 mm to 240 mm with the results of turning the original specimen obtained a minimum diameter of 8.6 mm is reduced to 7.3 mm at a maximum loading of 10 kg. Results of the research are brass specimens C3604BD type with a minimum diameter of 8.6 mm at a flexural stress of 298 MPa showing a fatigue life of 2455546 cycles with a test duration of 1754 minutes and a minimum specimen diameter of 7.3 mm at a flexural stress of 299 MPa showing a fatigue life of 684311 cycles with a test duration of 489 minutes which means that with a minimum specimen diameter of 7.3 mm the fatigue life is 3.59 times shorter than a minimum specimen diameter of 8.6 mm. Meanwhile, for aluminium AA1101 type with a minimum specimen diameter of 7.3 mm at a flexural stress of 182 MPa, the fatigue life is 422117 cycles with a test duration of 278 minutes and with a minimum specimen diameter of 8.6 mm at a flexural stress of 183 MPa, the fatigue life is 389232 cycles with a test duration of 302 minutes which means that with a minimum specimen diameter of 7.3 mm the&amp;nbsp;fatigue life is 1.05 times shorter than the minimum specimen diameter of 8.6 mm or almost the same.</dc:description>
	<dc:publisher xml:lang="en-US">Unit Publikasi Ilmiah, P3M, Politeknik Negeri Bali</dc:publisher>
	<dc:date>2021-11-30</dc:date>
	<dc:type>info:eu-repo/semantics/article</dc:type>
	<dc:type>info:eu-repo/semantics/publishedVersion</dc:type>
	<dc:format>application/pdf</dc:format>
	<dc:identifier>https://ojs2.pnb.ac.id/index.php/LOGIC/article/view/100</dc:identifier>
	<dc:identifier>10.31940/logic.v21i3.205-211</dc:identifier>
	<dc:source xml:lang="en-US"> Logic : Jurnal Rancang Bangun dan Teknologi; Vol. 21 No. 3 (2021): November; 205-211</dc:source>
	<dc:source>2580-5649</dc:source>
	<dc:source>1412-114X</dc:source>
	<dc:source>10.31940/logic.v21i3</dc:source>
	<dc:language>eng</dc:language>
	<dc:relation>https://ojs2.pnb.ac.id/index.php/LOGIC/article/view/100/47</dc:relation>
	<dc:rights xml:lang="en-US">Copyright (c) 2021  Logic : Jurnal Rancang Bangun dan Teknologi</dc:rights>
	<dc:rights xml:lang="en-US">https://scholar.google.co.id/citations?user=smBuD3gAAAAJ&amp;hl=id</dc:rights>
</oai_dc:dc>