Melola Discovery

← Melola Discovery

Jurnal SINTA 3

The Effect of Current and Layer in Bimetallic Welding Using J4-AH36 Filler on Tensile Strength

Logic: Jurnal Rancang Bangun dan Teknologi · Vol. 22 No. 1 (2022) · hlm. 35–42

DOI
10.31940/logic.v22i1.35-42
ISSN
2580-5649, 1412-114X
Terbit
2022-03-30
Penerbit
Unit Publikasi Ilmiah, P3M, Politeknik Negeri Bali
Bahasa
eng

Abstrak

If filler metal AH36 steel is used in bimetallic welding, it has the disadvantage of oxidation in the weld area. Also, the weld crack is encountered if filler metal J4 stainless steel is used in bimetallic welding. In this research, welding methods include the preparation of two types of base metal and a twisted combined filler of AH34 steel and J4 stainless steel as a filler rod applied. The welding of 5 mm thick bimetallic material uses the GTAW (Gas Tungsten Arc Welding) or TIG (Tungsten Inert Gas) process with a current electric welding 60 A, 70 A, and 80 A, one layer and two layers, and angle position 90o to 75o. Preparation of tensile test specimens, provision of shallow notches in the weld where the cross-sectional area of the same as the two-parent metals that have been welded together, tensile testing, and analysis of research data are conducted. The welding results using a current of 60 A with one layer showed a tensile strength of 402 MPa. However, welding with two layers decreased to 200 MPa with a difference of 50 % that means there is a significant difference. In the current of 70 A with one layer, the tensile strength is 433 MPa and with two layers, the value decreases very little at 426 MPa with a difference of 2 %, which means there is a minimal difference and makes the best current selection. For current 80 A with one layer produces tensile strength of 412 MPa. Yet, with two layers, the value decreases slightly to 380 MPa with a difference of 8 %, which means there is a relatively small difference.

Kata kunci

Jaringan kolaborasi para penulis

40 penulis · 139 tautan kepenulisan bersama · 69 lintas organisasi · menampilkan 40 yang paling banyak terhubung

Arahkan kursor atau ketuk sebuah nama untuk menyorot rekan penulisnya. Klik dua kali untuk membuka halaman penulis.

  • Politeknik Negeri Malang
  • University of Sarjanawiyata Tamansiswa
  • Politeknik Elektronika Negeri Surabaya
  • Politeknik Pertanian Negeri Pangkajene Kepulauan
  • Politeknik Surabaya
  • Jakarta State Polytechnic
  • Pohang University of Science and Technology
  • Organisasi lain
  • Afiliasi tidak diketahui
  • Organisasi berbeda
  • Organisasi sama
  • Afiliasi tidak diketahui
  • Garis lebih tebal = lebih banyak artikel bersama · lingkaran lebih besar = lebih banyak artikel
Tampilkan sebagai tabel
Rekan penulisOrganisasiArtikel bersama
Hangga WicaksonoPoliteknik Negeri Malang3
Sudarmadji .Afiliasi tidak diketahui2
Bambang IrawanLambung Mangkurat University2
Anggit MurdaniPoliteknik Negeri Malang2
Andhika Erlangga Setiawan PutraPoliteknik Negeri Malang2
Sza Sya Monica ValeriaPoliteknik Negeri Malang2
Muhammad RiyadiPoliteknik Pertanian Negeri Pangkajene Kepulauan1
Irawan IlhamPoliteknik Pertanian Negeri Pangkajene Kepulauan1
Eko Sulkhany YuliantoUniversity of Sarjanawiyata Tamansiswa1
Tito Aji MilleniawanUniversity of Sarjanawiyata Tamansiswa1
Mohammad Ahyar Syafwan LysanderUniversity of Sarjanawiyata Tamansiswa1
Shahnur Al-HafriUniversity of Sarjanawiyata Tamansiswa1
Didik SubiyantoUniversity of Sarjanawiyata Tamansiswa1
Tri Aji PurnomoUniversity of Sarjanawiyata Tamansiswa1
Arya Rafi AbrariPoliteknik Elektronika Negeri Surabaya1
Teguh Hady AriwibowoPoliteknik Elektronika Negeri Surabaya1
Lucky Pradigta Setiya RaharjaPoliteknik Elektronika Negeri Surabaya1
Satworo AdiwidodoPoliteknik Negeri Malang1
Fengky Adie PerdanaPoliteknik Negeri Malang1
Burniadi MoballaPoliteknik Surabaya1
Muh. Anis MustaghfirinPoliteknik Surabaya1
Muhammad Aghist FitronyPohang University of Science and Technology1
Charitsma TsaniPoliteknik Elektronika Negeri Surabaya1
Probo Yekti Salsabilla AdelwisePoliteknik Elektronika Negeri Surabaya1
Putri Dwi ImandiniPoliteknik Elektronika Negeri Surabaya1
Nanang QosimPoliteknik Negeri Malang1
Am. MufarrihPoliteknik Negeri Malang1
Zakki Fuadi EmzainPoliteknik Negeri Malang1
Rico Wahyu PratamaPoliteknik Negeri Malang1
Zakiyah AmaliaPoliteknik Negeri Malang1
Tri Setyo Aji CahyonoPoliteknik Negeri Malang1
Fica Aida Nadhifatul AiniPoliteknik Negeri Malang1
Aini Zuhra Binti Abdul KadirUniversity of Technology Malaysia1
Bayu PranotoPoliteknik Negeri Malang1
Muhammad Naufal Abiyyi HutagalungPoliteknik Negeri Malang1
Firman DwiyantoPoliteknik Negeri Malang1

Afiliasi berasal dari OpenAlex; metadata OAI-PMH jurnal tidak memuatnya. Penulis tanpa ID OpenAlex dicocokkan berdasarkan nama, sehingga dua orang bisa tergabung atau satu orang bisa terpisah.

Sumber metadata: OAI-PMH (metadata jurnal) https://ojs2.pnb.ac.id/index.php/LOGIC/oai, pertama di-harvest 19 Nov 2026, terakhir terlihat 19 Nov 2026.
Metadata asli (oai_dc)
<oai_dc:dc xmlns="http://www.openarchives.org/OAI/2.0/" xmlns:dc="http://purl.org/dc/elements/1.1/" xmlns:oai_dc="http://www.openarchives.org/OAI/2.0/oai_dc/" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:schemaLocation="http://www.openarchives.org/OAI/2.0/oai_dc/  http://www.openarchives.org/OAI/2.0/oai_dc.xsd">
	<dc:title xml:lang="en-US">The Effect of Current and Layer in Bimetallic Welding Using J4-AH36 Filler on Tensile Strength</dc:title>
	<dc:creator>Setiawan, Andri</dc:creator>
	<dc:creator>Hadi, Syamsul</dc:creator>
	<dc:creator>Alia, Nila</dc:creator>
	<dc:creator>Muslimin, Muslimin</dc:creator>
	<dc:subject xml:lang="en-US">TIG Welding</dc:subject>
	<dc:subject xml:lang="en-US">GTAW</dc:subject>
	<dc:subject xml:lang="en-US">Combined Filler</dc:subject>
	<dc:subject xml:lang="en-US">AH34 Steel</dc:subject>
	<dc:subject xml:lang="en-US">J4 Stainless Steel</dc:subject>
	<dc:subject xml:lang="en-US">Tensile Strength</dc:subject>
	<dc:subject xml:lang="en-US">Layer</dc:subject>
	<dc:description xml:lang="en-US">If filler metal AH36 steel is used in bimetallic welding, it has the disadvantage of oxidation in the weld area. Also, the weld crack is encountered if filler metal J4 stainless steel is used in bimetallic welding. In this research, welding methods include the preparation of two types of base metal and a twisted combined filler of AH34 steel and J4 stainless steel as a filler rod applied. The welding of 5 mm thick bimetallic material uses the GTAW (Gas Tungsten Arc Welding) or TIG (Tungsten Inert Gas) process with a current electric welding 60&amp;nbsp;A, 70&amp;nbsp;A, and 80&amp;nbsp;A, one layer and two layers, and angle position 90o&amp;nbsp;to 75o. Preparation of tensile test specimens, provision of shallow notches in the weld where the cross-sectional area of the same as the two-parent metals that have been welded together, tensile testing, and analysis of research data are conducted. The welding results using a current of 60 A with one layer showed a tensile strength of 402 MPa. However, welding with two layers decreased to 200 MPa with a difference of 50 %&amp;nbsp;that means there is a significant difference. In the current of 70 A with one layer, the tensile strength is 433 MPa&amp;nbsp;and with two layers, the value decreases very little at 426 MPa with a difference of 2 %, which means there is a minimal difference and makes the best current selection. For current 80 A with one layer produces tensile strength of 412 MPa. Yet, with two layers, the value decreases slightly to 380 MPa with a difference of 8 %, which means there is a relatively small difference.</dc:description>
	<dc:publisher xml:lang="en-US">Unit Publikasi Ilmiah, P3M, Politeknik Negeri Bali</dc:publisher>
	<dc:date>2022-03-30</dc:date>
	<dc:type>info:eu-repo/semantics/article</dc:type>
	<dc:type>info:eu-repo/semantics/publishedVersion</dc:type>
	<dc:format>application/pdf</dc:format>
	<dc:identifier>https://ojs2.pnb.ac.id/index.php/LOGIC/article/view/379</dc:identifier>
	<dc:identifier>10.31940/logic.v22i1.35-42</dc:identifier>
	<dc:source xml:lang="en-US"> Logic : Jurnal Rancang Bangun dan Teknologi; Vol. 22 No. 1 (2022): March; 35-42</dc:source>
	<dc:source>2580-5649</dc:source>
	<dc:source>1412-114X</dc:source>
	<dc:source>10.31940/logic.v22i1</dc:source>
	<dc:language>eng</dc:language>
	<dc:relation>https://ojs2.pnb.ac.id/index.php/LOGIC/article/view/379/219</dc:relation>
	<dc:rights xml:lang="en-US">Copyright (c) 2022  Logic : Jurnal Rancang Bangun dan Teknologi</dc:rights>
	<dc:rights xml:lang="en-US">https://scholar.google.co.id/citations?user=smBuD3gAAAAJ&amp;hl=id</dc:rights>
</oai_dc:dc>