Jurnal
SINTA 3
Heating Treatment of Incoming Air Combustion Chamber on the E20 Fuel Mixture: Perlakuan panas udara masuk ruang bakar pada campuran bahan bakar E20
Logic: Jurnal Rancang Bangun dan Teknologi · Vol. 23 No. 1 (2023) · hlm. 49–54
ISSN 2580-5649, 1412-114X
Terbit 2023-03-30
Penerbit Unit Publikasi Ilmiah, P3M, Politeknik Negeri Bali
Bahasa eng
Abstrak
This research was conducted to improve engine performance with a mixture of ethanol and gasoline, because the mixture of ethanol and gasoline fuel causes the value of the flash point and evaporation of fuel heat to be higher. To overcome this, the air entering the combustion chamber is carried out by being heated to 26°C (standard), 30°C, 40°C and 50°C, the fuel used is the E20 with engine revolutions of 2000 to 8000 revolutions per minute. The results showed that the highest torque of E20 fuel at 30°C with a value of 9.004 Nm increased by 0.27%. At the highest power, it is located at 30°C with a power of 5.99 kW 0.5%. For the lowest consumption in the 2000 round, it was found in the 30°C temperature treatment with a value of 1.4 Kg / Hp.Hour and for exhaust gas emissions the lowest hydro carbon value was found in the 30°C temperature treatment while the lowest value of carbon monoxide was found at the 50°C temperature treatment. These results show that the air heating treatment can improve engine performance.
Jaringan kolaborasi para penulis
23 penulis ·
87 tautan kepenulisan bersama
· 12 lintas organisasi
Arahkan kursor atau ketuk sebuah nama untuk menyorot rekan penulisnya. Klik dua kali untuk membuka halaman penulis.
Universitas Jember Politeknik Negeri Malang Institut Teknologi Sepuluh Nopember Afiliasi tidak diketahui
Organisasi berbeda
Organisasi sama
Afiliasi tidak diketahui
Garis lebih tebal = lebih banyak artikel bersama · lingkaran lebih besar = lebih banyak artikel
Tampilkan sebagai tabel
Afiliasi berasal dari OpenAlex; metadata OAI-PMH jurnal tidak memuatnya. Penulis tanpa ID OpenAlex dicocokkan berdasarkan nama, sehingga dua orang bisa tergabung atau satu orang bisa terpisah.
Sumber metadata: OAI-PMH (metadata jurnal) https://ojs2.pnb.ac.id/index.php/LOGIC/oai, pertama di-harvest 19 Nov 2026, terakhir terlihat 19 Nov 2026.
Metadata asli (oai_dc)
<oai_dc:dc xmlns="http://www.openarchives.org/OAI/2.0/" xmlns:dc="http://purl.org/dc/elements/1.1/" xmlns:oai_dc="http://www.openarchives.org/OAI/2.0/oai_dc/" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:schemaLocation="http://www.openarchives.org/OAI/2.0/oai_dc/ http://www.openarchives.org/OAI/2.0/oai_dc.xsd">
<dc:title xml:lang="en-US">Heating Treatment of Incoming Air Combustion Chamber on the E20 Fuel Mixture: Perlakuan panas udara masuk ruang bakar pada campuran bahan bakar E20</dc:title>
<dc:creator>Anugrah Ikhsani, Akbar</dc:creator>
<dc:creator>Kustanto, Nurkoyim</dc:creator>
<dc:creator>Fachri, Boy Arief</dc:creator>
<dc:subject xml:lang="en-US">Temperature</dc:subject>
<dc:subject xml:lang="en-US">Combustion</dc:subject>
<dc:subject xml:lang="en-US">Treatment</dc:subject>
<dc:description xml:lang="en-US">This research was conducted to improve engine performance with a mixture of ethanol and gasoline, because the mixture of ethanol and gasoline fuel causes the value of the flash point and evaporation of fuel heat to be higher. To overcome this, the air entering the combustion chamber is carried out by being heated to 26°C (standard), 30°C, 40°C and 50°C, the fuel used is the E20 with engine revolutions of 2000 to 8000 revolutions per minute. The results showed that the highest torque of E20 fuel at 30°C with a value of 9.004 Nm increased by 0.27%. At the highest power, it is located at 30°C with a power of 5.99 kW 0.5%. For the lowest consumption in the 2000 round, it was found in the 30°C temperature treatment with a value of 1.4 Kg / Hp.Hour and for exhaust gas emissions the lowest hydro carbon value was found in the 30°C temperature treatment while the lowest value of carbon monoxide was found at the 50°C temperature treatment.&nbsp; These results show that the air heating treatment can improve engine performance.</dc:description>
<dc:publisher xml:lang="en-US">Unit Publikasi Ilmiah, P3M, Politeknik Negeri Bali</dc:publisher>
<dc:date>2023-03-30</dc:date>
<dc:type>info:eu-repo/semantics/article</dc:type>
<dc:type>info:eu-repo/semantics/publishedVersion</dc:type>
<dc:format>application/pdf</dc:format>
<dc:identifier>https://ojs2.pnb.ac.id/index.php/LOGIC/article/view/548</dc:identifier>
<dc:identifier>10.31940/logic.v23i1.49-54</dc:identifier>
<dc:source xml:lang="en-US"> Logic : Jurnal Rancang Bangun dan Teknologi; Vol. 23 No. 1 (2023): March; 49-54</dc:source>
<dc:source>2580-5649</dc:source>
<dc:source>1412-114X</dc:source>
<dc:source>10.31940/logic.v23i1</dc:source>
<dc:language>eng</dc:language>
<dc:relation>https://ojs2.pnb.ac.id/index.php/LOGIC/article/view/548/523</dc:relation>
<dc:rights xml:lang="en-US">Copyright (c) 2023 Logic : Jurnal Rancang Bangun dan Teknologi</dc:rights>
<dc:rights xml:lang="en-US">https://scholar.google.co.id/citations?user=smBuD3gAAAAJ&hl=id</dc:rights>
</oai_dc:dc>
Sitasi dan pengindeksan
Jumlah menurut tiap indeks pada 19 Nov 2026; setiap indeks menghitung sitasi dengan cara berbeda.
OpenAlex juga mencatat karya ini di: crossref, doaj.
Sitasi artikel ini
APA 7
Anugrah Ikhsani, A., Kustanto, N., & Fachri, B. A. (2023). Heating Treatment of Incoming Air Combustion Chamber on the E20 Fuel Mixture: Perlakuan panas udara masuk ruang bakar pada campuran bahan bakar E20. Logic: Jurnal Rancang Bangun dan Teknologi, 23(1), 49–54. https://doi.org/10.31940/logic.v23i1.49-54
Salin
IEEE
A. Anugrah Ikhsani, N. Kustanto, and B. A. Fachri, “Heating Treatment of Incoming Air Combustion Chamber on the E20 Fuel Mixture: Perlakuan panas udara masuk ruang bakar pada campuran bahan bakar E20,” Logic: Jurnal Rancang Bangun dan Teknologi, vol. 23, no. 1, pp. 49–54, 2023, doi: 10.31940/logic.v23i1.49-54.
Salin
Dibuat dari metadata jurnal; periksa nama penulis sebelum dipakai.