Melola Discovery

← Melola Discovery

Jurnal SINTA 3

THE EFFECT OF PYROLYSIS TEMPERATURE ON THE HEAT VALUE OF PYRO-OIL USING PLASTIC WASTE

Logic: Jurnal Rancang Bangun dan Teknologi · Vol. 22 No. 2 (2022) · hlm. 154–158

DOI
10.31940/logic.v22i2.162-166
ISSN
2580-5649, 1412-114X
Terbit
2022-07-30
Penerbit
Unit Publikasi Ilmiah, P3M, Politeknik Negeri Bali
Bahasa
eng

Abstrak

This work primarily investigated the pyrolysis of smalls scale fixed bed reactor using plastic wastes type LDPE during slow pyrolysis (non-isothermal) in a batch reactor to assess the effect of different temperatures on the product yield and heating value. The calorie bomb of Parr Instrument was performed to investigated heating value of pyro-oil product at different temperatures 250, 275, 300oC. The pyro-oil obtained at higher product yield of 300 oC while the increased temperature will affect to increase the product yield of pyro-oil. The highest heating value of pyro-oil produced at a reactor temperature of 300oC is 9,769.78 cal/gr. From the results of pyro-oil using plastic waste type LDPE, the characteristics of the heating value are equivalent to diesel fuel.

Kata kunci

Jaringan kolaborasi para penulis

18 penulis · 46 tautan kepenulisan bersama · 1 lintas organisasi

Arahkan kursor atau ketuk sebuah nama untuk menyorot rekan penulisnya. Klik dua kali untuk membuka halaman penulis.

  • Politeknik Negeri Bali
  • Udayana University
  • Afiliasi tidak diketahui
  • Organisasi berbeda
  • Organisasi sama
  • Afiliasi tidak diketahui
  • Garis lebih tebal = lebih banyak artikel bersama · lingkaran lebih besar = lebih banyak artikel
Tampilkan sebagai tabel
Rekan penulisOrganisasiArtikel bersama
I Wayan Suma WibawaPoliteknik Negeri Bali3
Made Ardikosa Satrya WibawaPoliteknik Negeri Bali3
I Made Anom AdiaksaPoliteknik Negeri Bali2
I Ketut AdiPoliteknik Negeri Bali1
I Komang KantunPoliteknik Negeri Bali1
Anak Agung Gede Pradnyana DiputraAfiliasi tidak diketahui1
I Made RajendraPoliteknik Negeri Bali1
I Ketut Gde Juli SuarbawaPoliteknik Negeri Bali1
INS WinayaAfiliasi tidak diketahui1
I Made Anom AdiaksaPoliteknik Negeri Bali1
Agung PradnyanaPoliteknik Negeri Bali1
I Wayan Agus Rantia DanaPoliteknik Negeri Bali1
Anak Agung Gede Pradnyana DiputraPoliteknik Negeri Bali1
I Nyoman Suprapta WinayaUdayana University1
I Made SuciptaAfiliasi tidak diketahui1
I Gede SantosaPoliteknik Negeri Bali1
Ketut AdiPoliteknik Negeri Bali1

Afiliasi berasal dari OpenAlex; metadata OAI-PMH jurnal tidak memuatnya. Penulis tanpa ID OpenAlex dicocokkan berdasarkan nama, sehingga dua orang bisa tergabung atau satu orang bisa terpisah.

Sumber metadata: OAI-PMH (metadata jurnal) https://ojs2.pnb.ac.id/index.php/LOGIC/oai, pertama di-harvest 19 Nov 2026, terakhir terlihat 19 Nov 2026.
Metadata asli (oai_dc)
<oai_dc:dc xmlns="http://www.openarchives.org/OAI/2.0/" xmlns:dc="http://purl.org/dc/elements/1.1/" xmlns:oai_dc="http://www.openarchives.org/OAI/2.0/oai_dc/" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:schemaLocation="http://www.openarchives.org/OAI/2.0/oai_dc/  http://www.openarchives.org/OAI/2.0/oai_dc.xsd">
	<dc:title xml:lang="en-US">THE EFFECT OF PYROLYSIS TEMPERATURE ON THE HEAT VALUE OF PYRO-OIL USING PLASTIC WASTE</dc:title>
	<dc:creator>Putrawan, I Made Agus</dc:creator>
	<dc:subject xml:lang="en-US">fixed bed reactor</dc:subject>
	<dc:subject xml:lang="en-US">slow pyrolysis</dc:subject>
	<dc:subject xml:lang="en-US">plastic waste LDPE</dc:subject>
	<dc:subject xml:lang="en-US">heating value</dc:subject>
	<dc:description xml:lang="en-US">This work primarily investigated the pyrolysis of smalls scale fixed bed reactor using plastic wastes type LDPE during slow pyrolysis (non-isothermal) in a batch reactor to assess the effect of different temperatures on the product yield and heating value. The calorie bomb of Parr Instrument was performed to investigated heating value of pyro-oil product at different temperatures 250, 275, 300oC. The pyro-oil obtained at higher product yield of 300 oC while the increased temperature will affect to increase the product yield of pyro-oil. The highest heating value of pyro-oil produced at a reactor temperature of 300oC is 9,769.78 cal/gr. From the results of pyro-oil using plastic waste type LDPE, the characteristics of the heating value are equivalent to diesel fuel.</dc:description>
	<dc:publisher xml:lang="en-US">Unit Publikasi Ilmiah, P3M, Politeknik Negeri Bali</dc:publisher>
	<dc:date>2022-07-30</dc:date>
	<dc:type>info:eu-repo/semantics/article</dc:type>
	<dc:type>info:eu-repo/semantics/publishedVersion</dc:type>
	<dc:format>application/pdf</dc:format>
	<dc:identifier>https://ojs2.pnb.ac.id/index.php/LOGIC/article/view/560</dc:identifier>
	<dc:identifier>10.31940/logic.v22i2.162-166</dc:identifier>
	<dc:source xml:lang="en-US"> Logic : Jurnal Rancang Bangun dan Teknologi; Vol. 22 No. 2 (2022): July; 154-158</dc:source>
	<dc:source>2580-5649</dc:source>
	<dc:source>1412-114X</dc:source>
	<dc:source>10.31940/logic.v22i2</dc:source>
	<dc:language>eng</dc:language>
	<dc:relation>https://ojs2.pnb.ac.id/index.php/LOGIC/article/view/560/326</dc:relation>
	<dc:rights xml:lang="en-US">Copyright (c) 2022  Logic : Jurnal Rancang Bangun dan Teknologi</dc:rights>
	<dc:rights xml:lang="en-US">https://scholar.google.co.id/citations?user=smBuD3gAAAAJ&amp;hl=id</dc:rights>
</oai_dc:dc>