Melola Discovery

← Melola Discovery

Jurnal SINTA 3

Corrosion Rate and Residual Stress on GMAW Weld Joint of SUS 304 Steel with Static Thermal Tensioning Treatment

Logic: Jurnal Rancang Bangun dan Teknologi · Vol. 22 No. 3 (2022) · hlm. 269–275

DOI
10.31940/logic.v22i3.269-275
ISSN
2580-5649, 1412-114X
Terbit
2022-11-30
Penerbit
Unit Publikasi Ilmiah, P3M, Politeknik Negeri Bali
Bahasa
eng

Abstrak

One of the biggest problems in the metal welding process, especially for stainless steel, is the occurrence of large distortions. To reduce distortion during the welding process, it is recommended to provide secondary thermal like Static Thermal Tensioning. However, the provision of secondary thermal is allegedly able to decrease residual stress but reduce the corrosion resistance of stainless steel. In this study, variations in temperature of static thermal tensioning were applied during the GMAW process of SUS 304 plate. Furthermore, the results of the welding were made test specimens to determine the residual stress and corrosion rate of each temperature variation. The measurement of the residual stress using slitting method and measurements of the corrosion rate was carried out with the Autolab PGSTAT 204 potentiostat. The measurement results showed that residual stress of the welding results decrease along with the increase in the temperature of the Static Thermal Tensioning treatment where the treatment temperature of 200 ºC have highest residual stress at 113.79 MPa, followed by the treatment temperature of 250 ºC with 105.67 MPa value, and the lowest residual stress at temperature of 300 ºC with 77.82 MPa value. But, the corrosion rate value at the opposite way where the treatment temperature of 200 ºC produces the lowest corrosion rate, which is 0.70 mm/year, followed by the treatment temperature of 250 ºC of 0.99 mm/year and at a treatment temperature of 300 ºC with a corrosion rate of 1.27mm/year.

Kata kunci

Jaringan kolaborasi para penulis

25 penulis · 68 tautan kepenulisan bersama · 6 lintas organisasi

Arahkan kursor atau ketuk sebuah nama untuk menyorot rekan penulisnya. Klik dua kali untuk membuka halaman penulis.

  • Politeknik Negeri Malang
  • Lambung Mangkurat University
  • Afiliasi tidak diketahui
  • Organisasi berbeda
  • Organisasi sama
  • Afiliasi tidak diketahui
  • Garis lebih tebal = lebih banyak artikel bersama · lingkaran lebih besar = lebih banyak artikel
Tampilkan sebagai tabel
Rekan penulisOrganisasiArtikel bersama
PurwokoAfiliasi tidak diketahui5
Naufal Reza PutraAfiliasi tidak diketahui3
SubagiyoAfiliasi tidak diketahui2
Syamsul HadiPoliteknik Negeri Malang2
Syamsul HadiPoliteknik Negeri Malang1
SarjiyanaAfiliasi tidak diketahui1
Sudarmadji .Afiliasi tidak diketahui1
Nila AliaPoliteknik Negeri Malang1
Bambang IrawanLambung Mangkurat University1
Hangga WicaksonoPoliteknik Negeri Malang1
Andhika Erlangga Setiawan PutraPoliteknik Negeri Malang1
Sza Sya Monica ValeriaPoliteknik Negeri Malang1
Samsul HadiPoliteknik Negeri Malang1
Muhamad Zidan WibowoPoliteknik Negeri Malang1
Muhammad Naufal Abiyyi HutagalungPoliteknik Negeri Malang1
Firman DwiyantoPoliteknik Negeri Malang1
Dadang KurniawanPoliteknik Negeri Malang1
Sugeng Hadi SusiloPoliteknik Negeri Malang1
Zahratul JannahPoliteknik Negeri Malang1
Imam MashudiPoliteknik Negeri Malang1
Agus HardjitoPoliteknik Negeri Malang1
Listiono ListionoPoliteknik Negeri Malang1

Afiliasi berasal dari OpenAlex; metadata OAI-PMH jurnal tidak memuatnya. Penulis tanpa ID OpenAlex dicocokkan berdasarkan nama, sehingga dua orang bisa tergabung atau satu orang bisa terpisah.

Sumber metadata: OAI-PMH (metadata jurnal) https://ojs2.pnb.ac.id/index.php/LOGIC/oai, pertama di-harvest 19 Nov 2026, terakhir terlihat 19 Nov 2026.
Metadata asli (oai_dc)
<oai_dc:dc xmlns="http://www.openarchives.org/OAI/2.0/" xmlns:dc="http://purl.org/dc/elements/1.1/" xmlns:oai_dc="http://www.openarchives.org/OAI/2.0/oai_dc/" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:schemaLocation="http://www.openarchives.org/OAI/2.0/oai_dc/  http://www.openarchives.org/OAI/2.0/oai_dc.xsd">
	<dc:title xml:lang="en-US">Corrosion Rate and Residual Stress on GMAW Weld Joint of  SUS 304 Steel with Static Thermal Tensioning Treatment</dc:title>
	<dc:creator>R.N. Akhsanu Takwim</dc:creator>
	<dc:creator>Anggit Murdani</dc:creator>
	<dc:creator>Bayu Pranoto</dc:creator>
	<dc:subject xml:lang="en-US">GMAW</dc:subject>
	<dc:subject xml:lang="en-US">static thermal tensioning</dc:subject>
	<dc:subject xml:lang="en-US">corrotion rate</dc:subject>
	<dc:subject xml:lang="en-US">residual stress</dc:subject>
	<dc:subject xml:lang="en-US">SUS 304</dc:subject>
	<dc:description xml:lang="en-US">One of the biggest problems in the metal welding process, especially for stainless steel, is the occurrence of large distortions. To reduce distortion during the welding process, it is recommended to provide secondary thermal like Static Thermal Tensioning. However, the provision of secondary thermal is allegedly able to decrease residual stress but reduce the corrosion resistance of stainless steel . In this study, variations in temperature of static thermal tensioning were applied during the GMAW process of SUS 304 plate. Furthermore, the results of the welding were made test specimens to determine the residual stress and corrosion rate of each temperature variation. The measurement of the residual stress using slitting method and measurements of the corrosion rate was carried out with the Autolab PGSTAT 204 potentiostat. The measurement results showed that residual stress of the welding results decrease along with the increase in the temperature of the Static Thermal Tensioning treatment where the treatment temperature of 200 ºC have highest residual stress at 113.79 MPa, followed by the treatment temperature of 250 ºC with 105.67 MPa value, and the lowest residual stress at temperature of 300 ºC with 77.82 MPa value. But, the corrosion rate value at the opposite way where the treatment temperature of 200 ºC produces the lowest corrosion rate, which is 0.70 mm/year, followed by the treatment temperature of 250 ºC of&amp;nbsp; 0.99 mm/year and at a treatment temperature of 300 ºC with a corrosion rate of 1.27mm/year.</dc:description>
	<dc:publisher xml:lang="en-US">Unit Publikasi Ilmiah, P3M, Politeknik Negeri Bali</dc:publisher>
	<dc:date>2022-11-30</dc:date>
	<dc:type>info:eu-repo/semantics/article</dc:type>
	<dc:type>info:eu-repo/semantics/publishedVersion</dc:type>
	<dc:format>application/pdf</dc:format>
	<dc:identifier>https://ojs2.pnb.ac.id/index.php/LOGIC/article/view/685</dc:identifier>
	<dc:identifier>10.31940/logic.v22i3.269-275</dc:identifier>
	<dc:source xml:lang="en-US"> Logic : Jurnal Rancang Bangun dan Teknologi; Vol. 22 No. 3 (2022): November; 269-275</dc:source>
	<dc:source>2580-5649</dc:source>
	<dc:source>1412-114X</dc:source>
	<dc:source>10.31940/logic.v22i3</dc:source>
	<dc:language>eng</dc:language>
	<dc:relation>https://ojs2.pnb.ac.id/index.php/LOGIC/article/view/685/409</dc:relation>
	<dc:rights xml:lang="en-US">Copyright (c) 2022  Logic : Jurnal Rancang Bangun dan Teknologi</dc:rights>
	<dc:rights xml:lang="en-US">https://scholar.google.co.id/citations?user=smBuD3gAAAAJ&amp;hl=id</dc:rights>
</oai_dc:dc>