Melola Discovery

← Melola Discovery

Jurnal SINTA 3

Cutting Speed Analysis of Organic Waste Chopping Machine Fly Wheel Model Level Control

Logic: Jurnal Rancang Bangun dan Teknologi · Vol. 23 No. 2 (2023) · hlm. 121–130

DOI
10.31940/logic.v23i2.121-130
ISSN
2580-5649, 1412-114X
Terbit
2023-07-31
Penerbit
Unit Publikasi Ilmiah, P3M, Politeknik Negeri Bali
Bahasa
eng

Abstrak

This machine is used to chop leaves, twigs and branches into very small pieces, to avoid the bad smell due to the decay of organic waste and can be used as compost. The amount of cutting speed on the organic waste chopping machine with a chopping time of 2.5 kg of ketapang leaves is the average time obtained without fly wheels 2.0 minutes and with fly wheels 1.7 minutes, a time difference of 0.3 minutes. The chopping time of 2.5 kg of ketapang branches with an average time obtained without a fly wheel of 2.2 minutes and with a fly wheel of 2.0 minutes, a time difference of 0.2 minutes. The chopping time of teak branches is 2.5 kg with an average time obtained without a fly wheel of 2.6 minutes and with a fly wheel of 2.0 minutes, so the time difference is 0.6 minutes. So the cutting speed using a fly wheel is better. The results of the productivity obtained on the organic waste chopping machine, for the results of leaf chopping productivity without a fly wheel of 48% and those using a fly wheel of 58%, and the results of leaf chopping with a fly wheel are 10% more productive, for the productivity of chopping twigs without a fly wheel of 44% and those using a fly wheel of 49%, so the results of chopping twigs with a fly wheel are 5% more productive, and the results of chopping branches without a fly wheel of 37% and those using a fly wheel of 49%, so the results of chopping branches with a fly wheel are 12% more productive.

Kata kunci

Jaringan kolaborasi para penulis

40 penulis · 97 tautan kepenulisan bersama · 9 lintas organisasi

Arahkan kursor atau ketuk sebuah nama untuk menyorot rekan penulisnya. Klik dua kali untuk membuka halaman penulis.

  • Politeknik Negeri Bali
  • Warmadewa University
  • Afiliasi tidak diketahui
  • Organisasi berbeda
  • Organisasi sama
  • Afiliasi tidak diketahui
  • Garis lebih tebal = lebih banyak artikel bersama · lingkaran lebih besar = lebih banyak artikel
Tampilkan sebagai tabel
Rekan penulisOrganisasiArtikel bersama
Kadek Agus Mahabojana D.P.Warmadewa University8
I Nengah Darma SusilaPoliteknik Negeri Bali4
Made Dika NugrahaWarmadewa University4
I Ketut SuhermanPoliteknik Negeri Bali3
Achmad WiboloPoliteknik Negeri Bali3
Daud Simon AnakottaparyPoliteknik Negeri Bali3
I Ketut RimpungPoliteknik Negeri Bali2
I Ketut AdiPoliteknik Negeri Bali2
Nyoman SutarnaPoliteknik Negeri Bali2
Ketut BangsePoliteknik Negeri Bali2
I Komang RusmariadiPoliteknik Negeri Bali2
Kasiani KasianiAfiliasi tidak diketahui1
A.A Ayu Mirah KencanawatiAfiliasi tidak diketahui1
I Made SudanaPoliteknik Negeri Bali1
I Wayan AryanaAfiliasi tidak diketahui1
I Putu Gede Sopan RahtikaPoliteknik Negeri Bali1
Anak Agung Ngurah Bagus MulawarmanPoliteknik Negeri Bali1
I N. G. SastrawanPoliteknik Negeri Bali1
Bagus RadityaPoliteknik Negeri Bali1
I Made Anom AdiaksaPoliteknik Negeri Bali1
Gusti Ngurah ArdanaPoliteknik Negeri Bali1
Putu DarmawaPoliteknik Negeri Bali1
Ludra AntaraPoliteknik Negeri Bali1
Luh Putu Ike MidianiPoliteknik Negeri Bali1
I Made Duta IrawanPoliteknik Negeri Bali1
I Ketut SutapaPoliteknik Negeri Bali1
I Made AryanaAfiliasi tidak diketahui1
I Putu Sastra NegaraPoliteknik Negeri Bali1
I Gusti Ngurah ArdanaPoliteknik Negeri Bali1
Kadek Agus Mahabojana Dwi PrayogaWarmadewa University1
Nyoman Angga PrabawaWarmadewa University1
I Gede Oka AdnyanaAfiliasi tidak diketahui1
I Ketut SutapaPoliteknik Negeri Bali1
I Ketut Arta WidanaPoliteknik Negeri Bali1
Ni Wayan SadiyaniPoliteknik Negeri Bali1

Afiliasi berasal dari OpenAlex; metadata OAI-PMH jurnal tidak memuatnya. Penulis tanpa ID OpenAlex dicocokkan berdasarkan nama, sehingga dua orang bisa tergabung atau satu orang bisa terpisah.

Sumber metadata: OAI-PMH (metadata jurnal) https://ojs2.pnb.ac.id/index.php/LOGIC/oai, pertama di-harvest 19 Nov 2026, terakhir terlihat 19 Nov 2026.
Metadata asli (oai_dc)
<oai_dc:dc xmlns="http://www.openarchives.org/OAI/2.0/" xmlns:dc="http://purl.org/dc/elements/1.1/" xmlns:oai_dc="http://www.openarchives.org/OAI/2.0/oai_dc/" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:schemaLocation="http://www.openarchives.org/OAI/2.0/oai_dc/  http://www.openarchives.org/OAI/2.0/oai_dc.xsd">
	<dc:title xml:lang="en-US">Cutting Speed Analysis of Organic Waste Chopping Machine Fly Wheel Model Level Control</dc:title>
	<dc:creator>I Putu Darmawa</dc:creator>
	<dc:creator>I Nengah Ludra Antara</dc:creator>
	<dc:creator>I Nyoman Sutarna</dc:creator>
	<dc:creator>Ida Bagus Puspa Indra</dc:creator>
	<dc:creator>I Nyoman Gunung </dc:creator>
	<dc:subject xml:lang="en-US">analysis</dc:subject>
	<dc:subject xml:lang="en-US">machine cutting speed</dc:subject>
	<dc:subject xml:lang="en-US">organic waste</dc:subject>
	<dc:subject xml:lang="en-US">flywheel</dc:subject>
	<dc:description xml:lang="en-US">This machine is used to chop leaves, twigs and branches into very small pieces, to avoid the bad smell due to the decay of organic waste and can be used as compost. The amount of cutting speed on the organic waste chopping machine with a chopping time of 2.5 kg of ketapang leaves is the average time obtained without fly wheels 2.0 minutes and with fly wheels 1.7 minutes, a time difference of 0.3 minutes. The chopping time of 2.5 kg of ketapang branches with an average time obtained without a fly wheel of 2.2 minutes and with a fly wheel of 2.0 minutes, a time difference of 0.2 minutes. The chopping time of teak branches is 2.5 kg with an average time obtained without a fly wheel of 2.6 minutes and with a fly wheel of 2.0 minutes, so the time difference is 0.6 minutes. So the cutting speed using a fly wheel is better. The results of the productivity obtained on the organic waste chopping machine, for the results of leaf chopping productivity without a fly wheel of 48% and those using a fly wheel of 58%, and the results of leaf chopping with a fly wheel are 10% more productive, for the productivity of chopping twigs without a fly wheel of 44% and those using a fly wheel of 49%, so the results of chopping twigs with a fly wheel are 5% more productive, and the results of chopping branches without a fly wheel of 37% and those using a fly wheel of 49%, so the results of chopping branches with a fly wheel are 12% more productive.</dc:description>
	<dc:publisher xml:lang="en-US">Unit Publikasi Ilmiah, P3M, Politeknik Negeri Bali</dc:publisher>
	<dc:date>2023-07-31</dc:date>
	<dc:type>info:eu-repo/semantics/article</dc:type>
	<dc:type>info:eu-repo/semantics/publishedVersion</dc:type>
	<dc:format>application/pdf</dc:format>
	<dc:identifier>https://ojs2.pnb.ac.id/index.php/LOGIC/article/view/994</dc:identifier>
	<dc:identifier>10.31940/logic.v23i2.121-130</dc:identifier>
	<dc:source xml:lang="en-US"> Logic : Jurnal Rancang Bangun dan Teknologi; Vol. 23 No. 2 (2023): July; 121-130</dc:source>
	<dc:source>2580-5649</dc:source>
	<dc:source>1412-114X</dc:source>
	<dc:source>10.31940/logic.v23i2</dc:source>
	<dc:language>eng</dc:language>
	<dc:relation>https://ojs2.pnb.ac.id/index.php/LOGIC/article/view/994/641</dc:relation>
	<dc:rights xml:lang="en-US">Copyright (c) 2023  Logic : Jurnal Rancang Bangun dan Teknologi</dc:rights>
	<dc:rights xml:lang="en-US">https://scholar.google.co.id/citations?user=smBuD3gAAAAJ&amp;hl=id</dc:rights>
</oai_dc:dc>