Melola Discovery

← Melola Discovery

Jurnal SINTA 3

Behavior And Performance Of Steel Frame Structures With X-Type Concentric Bracing System Due To Variations In Comparison Of Span Width To Story Height (L/H)

Logic: Jurnal Rancang Bangun dan Teknologi · Vol. 23 No. 2 (2023) · hlm. 85–95

DOI
10.31940/logic.v23i2.85-95
ISSN
2580-5649, 1412-114X
Terbit
2023-07-31
Penerbit
Unit Publikasi Ilmiah, P3M, Politeknik Negeri Bali
Bahasa
eng

Abstrak

X-type bracing is the strongest bracing. The bigger ratio of the width of the span to the high level (L/H), the slope of the angle on the bracing will be more declivous. The analysis of the structure with the L/H ratio to determine the behavior of the structure using linear analysis of response spectrum and structural performance using the static nonlinear pushover analysis (ETABS 2016) to determine the displacement target that occurred in the structure. Structural modeling is done on 3D portals with levels of 3, 5, 8 and 10 floors with different L/H variations, including L/H=1; L/H=1.25; L/H=1.5; L/H=1.75; and L/H=2. Structural modeling is planned to be in the Surabaya area with moderate soil conditions. This study obtains data such as: (1) The largest maximum drift and floor drift are at type L/H=2, (2) The largest base shear force in the nonlinear pushover analysis at each story occurs at L/H=1, (3 ) In the yield condition type L/H=1 has the smallest percentage of structural stiffness, but in the ultimate condition type L/H=1 has the largest percentage of structural stiffness, and (4) The highest ductility value at each story occurs in type L/H=2. Based on these results, it shows that the greater the type of L/H in the bracing structure, the greater the displacement target produced. If the angle of bracing becomes more sloping, then the displacement and target displacement that occurs increases.

Kata kunci

Jaringan kolaborasi para penulis

23 penulis · 58 tautan kepenulisan bersama · 9 lintas organisasi

Arahkan kursor atau ketuk sebuah nama untuk menyorot rekan penulisnya. Klik dua kali untuk membuka halaman penulis.

  • Politeknik Negeri Bali
  • University of National Education
  • Universitas Triatma Mulya
  • Afiliasi tidak diketahui
  • Organisasi berbeda
  • Organisasi sama
  • Afiliasi tidak diketahui
  • Garis lebih tebal = lebih banyak artikel bersama · lingkaran lebih besar = lebih banyak artikel
Tampilkan sebagai tabel
Rekan penulisOrganisasiArtikel bersama
I Ketut SutapaPoliteknik Negeri Bali9
Decky Cipta IndrashwaraUniversity of National Education7
I Nyoman SutarnaPoliteknik Negeri Bali4
I Ketut SutapaPoliteknik Negeri Bali3
I Made SudiarsaPoliteknik Negeri Bali2
Dewa Ayu Trisna Adhiswari WedagamaUniversity of National Education2
. SudirmanAfiliasi tidak diketahui1
Made Ery ArsanaPoliteknik Negeri Bali1
I Wayan Adi SubagiaPoliteknik Negeri Bali1
I Dewa Gede Agus Tri PutraPoliteknik Negeri Bali1
I Wayan SuastawaPoliteknik Negeri Bali1
I Nyoman ArdikaPoliteknik Negeri Bali1
I Nyoman SutapaPoliteknik Negeri Bali1
I Putu Agus KrisnadinataPoliteknik Negeri Bali1
Ida Bagus WirahajiPoliteknik Negeri Bali1
I Made AryanaAfiliasi tidak diketahui1
I Ketut SuhermanPoliteknik Negeri Bali1
I Gusti Ngurah ArdanaPoliteknik Negeri Bali1
I Ketut SutapaUniversitas Triatma Mulya1
I Wayan Darta SupartaPoliteknik Negeri Bali1

Afiliasi berasal dari OpenAlex; metadata OAI-PMH jurnal tidak memuatnya. Penulis tanpa ID OpenAlex dicocokkan berdasarkan nama, sehingga dua orang bisa tergabung atau satu orang bisa terpisah.

Sumber metadata: OAI-PMH (metadata jurnal) https://ojs2.pnb.ac.id/index.php/LOGIC/oai, pertama di-harvest 19 Nov 2026, terakhir terlihat 19 Nov 2026.
Metadata asli (oai_dc)
<oai_dc:dc xmlns="http://www.openarchives.org/OAI/2.0/" xmlns:dc="http://purl.org/dc/elements/1.1/" xmlns:oai_dc="http://www.openarchives.org/OAI/2.0/oai_dc/" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:schemaLocation="http://www.openarchives.org/OAI/2.0/oai_dc/  http://www.openarchives.org/OAI/2.0/oai_dc.xsd">
	<dc:title xml:lang="en-US">Behavior And Performance Of Steel Frame Structures With X-Type Concentric Bracing System Due To Variations In Comparison Of Span Width To Story Height (L/H)</dc:title>
	<dc:creator>Kumara, I Nyoman Indra</dc:creator>
	<dc:creator>Tapa, I Gede Fery Surya</dc:creator>
	<dc:creator>Susila, I Nengah Darma</dc:creator>
	<dc:subject xml:lang="en-US">Bracing, L/H, Response Spectrum, Pushover.</dc:subject>
	<dc:description xml:lang="en-US">X-type bracing is the strongest bracing. The bigger ratio of the width of the span to the high level (L/H), the slope of the angle on the bracing will be more declivous. The analysis of the structure with the L/H ratio to determine the behavior of the structure using linear analysis of response spectrum and structural performance using the static nonlinear pushover analysis (ETABS 2016) to determine the displacement target that occurred in the structure. Structural modeling is done on 3D portals with levels of 3, 5, 8 and 10 floors with different L/H variations, including L/H=1; L/H=1.25; L/H=1.5; L/H=1.75; and L/H=2. Structural modeling is planned to be in the Surabaya area with moderate soil conditions. This study obtains data such as: (1) The largest maximum drift and floor drift are at type L/H=2, (2) The largest base shear force in the nonlinear pushover analysis at each story occurs at L/H=1, (3 ) In the yield condition type L/H=1 has the smallest percentage of structural stiffness, but in the ultimate condition type L/H=1 has the largest percentage of structural stiffness, and (4) The highest ductility value at each story occurs in type L/H=2 . Based on these results, it shows that the greater the type of L/H in the bracing structure, the greater the displacement target produced. If the angle of bracing becomes more sloping, then the displacement and target displacement that occurs increases.</dc:description>
	<dc:publisher xml:lang="en-US">Unit Publikasi Ilmiah, P3M, Politeknik Negeri Bali</dc:publisher>
	<dc:date>2023-07-31</dc:date>
	<dc:type>info:eu-repo/semantics/article</dc:type>
	<dc:type>info:eu-repo/semantics/publishedVersion</dc:type>
	<dc:format>application/pdf</dc:format>
	<dc:identifier>https://ojs2.pnb.ac.id/index.php/LOGIC/article/view/995</dc:identifier>
	<dc:identifier>10.31940/logic.v23i2.85-95</dc:identifier>
	<dc:source xml:lang="en-US"> Logic : Jurnal Rancang Bangun dan Teknologi; Vol. 23 No. 2 (2023): July; 85-95</dc:source>
	<dc:source>2580-5649</dc:source>
	<dc:source>1412-114X</dc:source>
	<dc:source>10.31940/logic.v23i2</dc:source>
	<dc:language>eng</dc:language>
	<dc:relation>https://ojs2.pnb.ac.id/index.php/LOGIC/article/view/995/609</dc:relation>
	<dc:rights xml:lang="en-US">Copyright (c) 2023  Logic : Jurnal Rancang Bangun dan Teknologi</dc:rights>
	<dc:rights xml:lang="en-US">https://scholar.google.co.id/citations?user=smBuD3gAAAAJ&amp;hl=id</dc:rights>
</oai_dc:dc>