Melola Discovery

← Melola Discovery

Jurnal SINTA 3

Ultrasonic Pulse Velocity Test Using BS Method And T-Method to Estimate Crack Depth of Concrete

Logic: Jurnal Rancang Bangun dan Teknologi · Vol. 23 No. 3 (2023) · hlm. 164–168

DOI
10.31940/logic.v23i3.164-168
ISSN
2580-5649, 1412-114X
Terbit
2023-11-30
Penerbit
Unit Publikasi Ilmiah, P3M, Politeknik Negeri Bali
Bahasa
eng

Abstrak

Ultrasonic Pulse Velocity (UPV) as a non-destructive test is commonly used on concrete crack estimation. There are several methods are applied based on the transducer configuration. Among the methods, BS (British Standard) method and T method was used in this study. On this method, transmitter was fixed at certain distance from crack and receiver was moved at several constant intervals, then crack depth was analyze from the relation between the transducer distance and the transit time curve. This research is conducted to study the accuracy of BS method and T-method in estimating the crack depth of concrete using NDT James Instrument V-Meter M-K IV. Concrete beams were made with artificial crack depth 2 cm, and 4 cm. Transducers 54kHz of UPV Mark IV were set at constant interval. Thus, the comparation of actual depth and experimentally result was analyzed. The study concluded that, the accuracy of the BS method has a better estimation result with a relative error of 27,75% and 35,95%, compare to the T-method that has 79,30% and 79,82% error.

Kata kunci

Jaringan kolaborasi para penulis

7 penulis · 13 tautan kepenulisan bersama

Arahkan kursor atau ketuk sebuah nama untuk menyorot rekan penulisnya. Klik dua kali untuk membuka halaman penulis.

  • Politeknik Negeri Bali
  • Organisasi berbeda
  • Organisasi sama
  • Afiliasi tidak diketahui
  • Garis lebih tebal = lebih banyak artikel bersama · lingkaran lebih besar = lebih banyak artikel
Tampilkan sebagai tabel
Rekan penulisOrganisasiArtikel bersama
Ni Nyoman YuliantiniPoliteknik Negeri Bali4
Ni Ketut SucianiPoliteknik Negeri Bali4
I Gusti Ayu Dewi ParamitaPoliteknik Negeri Bali4
I Wayan Dana ArdikaPoliteknik Negeri Bali2
IGA Dewi ParamitaPoliteknik Negeri Bali1
I Gusti Ayu Putu Dewi ParamitaPoliteknik Negeri Bali1

Afiliasi berasal dari OpenAlex; metadata OAI-PMH jurnal tidak memuatnya. Penulis tanpa ID OpenAlex dicocokkan berdasarkan nama, sehingga dua orang bisa tergabung atau satu orang bisa terpisah.

Sumber metadata: OAI-PMH (metadata jurnal) https://ojs2.pnb.ac.id/index.php/LOGIC/oai, pertama di-harvest 19 Nov 2026, terakhir terlihat 19 Nov 2026.
Metadata asli (oai_dc)
<oai_dc:dc xmlns="http://www.openarchives.org/OAI/2.0/" xmlns:dc="http://purl.org/dc/elements/1.1/" xmlns:oai_dc="http://www.openarchives.org/OAI/2.0/oai_dc/" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:schemaLocation="http://www.openarchives.org/OAI/2.0/oai_dc/  http://www.openarchives.org/OAI/2.0/oai_dc.xsd">
	<dc:title xml:lang="en-US">Ultrasonic Pulse Velocity Test Using BS Method And T-Method to Estimate Crack Depth of Concrete</dc:title>
	<dc:creator>Setyono, Evin Yudhi</dc:creator>
	<dc:subject xml:lang="en-US">concrete crack</dc:subject>
	<dc:subject xml:lang="en-US">BS-method</dc:subject>
	<dc:subject xml:lang="en-US">T-method</dc:subject>
	<dc:description xml:lang="en-US">Ultrasonic Pulse Velocity (UPV) as a non-destructive test is commonly used on concrete crack estimation. There are several methods are applied based on the transducer configuration. Among the methods, BS (British Standard) method and T method was used in this study. On this method, transmitter was fixed at certain distance from crack and receiver was moved at several constant intervals, then crack depth was analyze from the relation between the transducer distance and the transit time curve.&amp;nbsp; This research is conducted to study the accuracy of BS method and T-method in estimating the crack depth of concrete using NDT James Instrument V-Meter M-K IV. Concrete beams were made with artificial crack depth 2 cm, and 4 cm. Transducers 54kHz of UPV Mark IV were set at constant interval. Thus, the comparation of actual depth and experimentally result was analyzed. The study concluded that, the accuracy of the BS method has a better estimation result with a relative error of 27,75% and 35,95%, compare to the T-method that has 79,30% and 79,82% error.</dc:description>
	<dc:publisher xml:lang="en-US">Unit Publikasi Ilmiah, P3M, Politeknik Negeri Bali</dc:publisher>
	<dc:date>2023-11-30</dc:date>
	<dc:type>info:eu-repo/semantics/article</dc:type>
	<dc:type>info:eu-repo/semantics/publishedVersion</dc:type>
	<dc:format>application/pdf</dc:format>
	<dc:identifier>https://ojs2.pnb.ac.id/index.php/LOGIC/article/view/1132</dc:identifier>
	<dc:identifier>10.31940/logic.v23i3.164-168</dc:identifier>
	<dc:source xml:lang="en-US"> Logic : Jurnal Rancang Bangun dan Teknologi; Vol. 23 No. 3 (2023): November; 164-168</dc:source>
	<dc:source>2580-5649</dc:source>
	<dc:source>1412-114X</dc:source>
	<dc:source>10.31940/logic.v23i3</dc:source>
	<dc:language>eng</dc:language>
	<dc:relation>https://ojs2.pnb.ac.id/index.php/LOGIC/article/view/1132/682</dc:relation>
	<dc:rights xml:lang="en-US">Copyright (c) 2023  Logic : Jurnal Rancang Bangun dan Teknologi</dc:rights>
	<dc:rights xml:lang="en-US">https://scholar.google.co.id/citations?user=smBuD3gAAAAJ&amp;hl=id</dc:rights>
</oai_dc:dc>