Melola Discovery

← Melola Discovery

Jurnal SINTA 3

Effect of Current Strength and Flow Rate of Shielding Gas on the Impact and Tensile Strength of GMAW Welsing Result on SPHC Materials

Logic: Jurnal Rancang Bangun dan Teknologi · Vol. 23 No. 3 (2023) · hlm. 194–202

DOI
10.31940/logic.v23i3.194-202
ISSN
2580-5649, 1412-114X
Terbit
2023-11-30
Penerbit
Unit Publikasi Ilmiah, P3M, Politeknik Negeri Bali
Bahasa
eng

Abstrak

GMAW welding is one of the welds that is easy to use, especially for welding low-carbon steel that is generally widely used in the process of making frame structures, an example is a car frame which is generally made using materials that have strong, ductile, lightweight, and able to withstand impact and tensile loads when the car is used, one example of the material is SPHC. The problem is that GMAW welding results are affected by welding parameters. In this study, the parameter chosen was the strong variation of the welding current. The purpose of this study is to determine the strong influence of the current and flow rate of protective gases as well as the interaction on the impact and tensile strength of GMAW welding results on SPHC materials. This study used an experimental method with current strength parameters worth 120A,130A, and 140A as well as variations in the flow rate of protective gases, namely 15 liters/minute,20 liters/minute, and 25 liters/minute. The results of research in general, the impact strength on the weld metal has a lower result than the row material, and the tensile strength on the weld metal has a higher yield than the row material. From the study, it can be seen that the optimal current strength and flow rate of protective gas is a current strength of 140 A and a flow rate of protective gas worth 25 L /minute with an impact strength of 2.91 J/mm2 and a tensile strength of 431.72 MPa.

Kata kunci

Jaringan kolaborasi para penulis

7 penulis · 12 tautan kepenulisan bersama

Arahkan kursor atau ketuk sebuah nama untuk menyorot rekan penulisnya. Klik dua kali untuk membuka halaman penulis.

  • Politeknik Negeri Malang
  • Afiliasi tidak diketahui
  • Organisasi berbeda
  • Organisasi sama
  • Afiliasi tidak diketahui
  • Garis lebih tebal = lebih banyak artikel bersama · lingkaran lebih besar = lebih banyak artikel
Tampilkan sebagai tabel
Rekan penulisOrganisasiArtikel bersama
Bayu PranotoPoliteknik Negeri Malang2
Syamsul HadiPoliteknik Negeri Malang1
SarjiyanaAfiliasi tidak diketahui1
Samsul HadiPoliteknik Negeri Malang1
Muhamad Zidan WibowoPoliteknik Negeri Malang1

Afiliasi berasal dari OpenAlex; metadata OAI-PMH jurnal tidak memuatnya. Penulis tanpa ID OpenAlex dicocokkan berdasarkan nama, sehingga dua orang bisa tergabung atau satu orang bisa terpisah.

Sumber metadata: OAI-PMH (metadata jurnal) https://ojs2.pnb.ac.id/index.php/LOGIC/oai, pertama di-harvest 19 Nov 2026, terakhir terlihat 19 Nov 2026.
Metadata asli (oai_dc)
<oai_dc:dc xmlns="http://www.openarchives.org/OAI/2.0/" xmlns:dc="http://purl.org/dc/elements/1.1/" xmlns:oai_dc="http://www.openarchives.org/OAI/2.0/oai_dc/" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:schemaLocation="http://www.openarchives.org/OAI/2.0/oai_dc/  http://www.openarchives.org/OAI/2.0/oai_dc.xsd">
	<dc:title xml:lang="en-US">Effect of Current Strength and Flow Rate of Shielding Gas on the Impact and Tensile Strength of GMAW Welsing Result on SPHC Materials</dc:title>
	<dc:creator>Nurvian Amrullah, Radhi</dc:creator>
	<dc:creator>Subagiyo</dc:creator>
	<dc:subject xml:lang="en-US">GMAW welding</dc:subject>
	<dc:subject xml:lang="en-US">SPHC material</dc:subject>
	<dc:subject xml:lang="en-US">impact strength</dc:subject>
	<dc:subject xml:lang="en-US">tensile strength</dc:subject>
	<dc:description xml:lang="en-US">GMAW welding is one of the welds that is easy to use, especially for welding low-carbon steel that is generally widely used in the process of making frame structures, an example is a car frame which is generally made using materials that have strong, ductile, lightweight, and able to withstand impact and tensile loads when the car is used, one example of the material is SPHC. The problem is that GMAW welding results are affected by welding parameters. In this study, the parameter chosen was the strong variation of the welding current. The purpose of this study is to determine the strong influence of the current and flow rate of protective gases as well as the interaction on the impact and tensile strength of GMAW welding results on SPHC materials. This study used an experimental method with current strength parameters worth 120A,130A, and 140A as well as variations in the flow rate of protective gases, namely 15 liters/minute,20 liters/minute, and 25 liters/minute. The results of research in general, the impact strength on the weld metal has a lower result than the row material, and the tensile strength on the weld metal has a higher yield than the row material. From the study, it can be seen that the optimal current strength and flow rate of protective gas is a current strength of 140 A and a flow rate of protective gas worth 25 L /minute with an impact strength of 2.91 J/mm2 and a tensile strength of 431.72 MPa.</dc:description>
	<dc:publisher xml:lang="en-US">Unit Publikasi Ilmiah, P3M, Politeknik Negeri Bali</dc:publisher>
	<dc:date>2023-11-30</dc:date>
	<dc:type>info:eu-repo/semantics/article</dc:type>
	<dc:type>info:eu-repo/semantics/publishedVersion</dc:type>
	<dc:format>application/pdf</dc:format>
	<dc:identifier>https://ojs2.pnb.ac.id/index.php/LOGIC/article/view/1140</dc:identifier>
	<dc:identifier>10.31940/logic.v23i3.194-202</dc:identifier>
	<dc:source xml:lang="en-US"> Logic : Jurnal Rancang Bangun dan Teknologi; Vol. 23 No. 3 (2023): November; 194-202</dc:source>
	<dc:source>2580-5649</dc:source>
	<dc:source>1412-114X</dc:source>
	<dc:source>10.31940/logic.v23i3</dc:source>
	<dc:language>eng</dc:language>
	<dc:relation>https://ojs2.pnb.ac.id/index.php/LOGIC/article/view/1140/699</dc:relation>
	<dc:rights xml:lang="en-US">Copyright (c) 2023  Logic : Jurnal Rancang Bangun dan Teknologi</dc:rights>
	<dc:rights xml:lang="en-US">https://scholar.google.co.id/citations?user=smBuD3gAAAAJ&amp;hl=id</dc:rights>
</oai_dc:dc>