Melola Discovery

← Melola Discovery

Jurnal SINTA 3

Design of Clean Water Booster Pump for High-Rise Buildings

Logic: Jurnal Rancang Bangun dan Teknologi · Vol. 23 No. 3 (2023) · hlm. 203–211

DOI
10.31940/logic.v23i3.203-211
ISSN
2580-5649, 1412-114X
Terbit
2023-11-30
Penerbit
Unit Publikasi Ilmiah, P3M, Politeknik Negeri Bali
Bahasa
eng

Abstrak

A sanitary system is a supporting component designed to meet the clean water requirements of a building, primarily for sanitation activities. The average sanitary equipment used typically requires a shower pressure of ±1 Bar. However, the shower pressure can be significantly affected by factors such as the distance from the top tank and the building's layout, considering only the pressure due to gravity. To address inadequate shower pressure, an auxiliary pump known as a booster pump is necessary. The need for a booster pump is determined by the cumulative demand from plumbing equipment, where the total capacity required is 6057 liters/hour. To address this demand, the system employs two pump units, each with a capacity of 3 m3/hour. The distribution pipes utilized in the system adhere to established standards and are made of random polypropylene with a diameter of 2 inches and a flow rate of 0.005889 m3/second. The overall head loss resulting from this installation amounts to 31.62 meters. To accommodate the booster system, a pressure tank with a capacity of 67 liters is employed. The minimum working pressure required for the pumps is 1.8 Bar.

Kata kunci

Jaringan kolaborasi para penulis

40 penulis · 116 tautan kepenulisan bersama · 4 lintas organisasi · menampilkan 40 yang paling banyak terhubung

Arahkan kursor atau ketuk sebuah nama untuk menyorot rekan penulisnya. Klik dua kali untuk membuka halaman penulis.

  • Politeknik Negeri Bali
  • Warmadewa University
  • Afiliasi tidak diketahui
  • Organisasi berbeda
  • Organisasi sama
  • Afiliasi tidak diketahui
  • Garis lebih tebal = lebih banyak artikel bersama · lingkaran lebih besar = lebih banyak artikel
Tampilkan sebagai tabel
Rekan penulisOrganisasiArtikel bersama
I Kadek DwianaPoliteknik Negeri Bali3
I Nengah Ludra AntaraPoliteknik Negeri Bali3
I Nyoman SutarnaPoliteknik Negeri Bali3
I Nyoman SuamirPoliteknik Negeri Bali3
I Wayan Adi SubagiaPoliteknik Negeri Bali2
I Putu Merta AdnyanaPoliteknik Negeri Bali2
Ida Bagus Puspa IndraPoliteknik Negeri Bali2
I Wayan Adi SubagiaPoliteknik Negeri Bali2
I Dewa Made SusilaPoliteknik Negeri Bali2
I Ketut RimpungPoliteknik Negeri Bali2
I Wayan TemajaPoliteknik Negeri Bali2
I Putu DarmawaPoliteknik Negeri Bali2
I Komang RusmariadiPoliteknik Negeri Bali2
Made Ery ArsanaPoliteknik Negeri Bali1
Arbyansyah DarmawanPoliteknik Negeri Bali1
I Dewa Gede Agus Tri PutraAfiliasi tidak diketahui1
I Gede Artha NegaraPoliteknik Negeri Bali1
Daud Simon AnakottaparyPoliteknik Negeri Bali1
Edo KriswidiantoAfiliasi tidak diketahui1
I Wayan TemajaAfiliasi tidak diketahui1
I Wayan Agus Rantia DanaPoliteknik Negeri Bali1
I Made Bagus Panji AdityaPoliteknik Negeri Bali1
I Komang Risky Putra WibawaAfiliasi tidak diketahui1
I Made Prasana YogaPoliteknik Negeri Bali1
I Nengah Darma SusilaAfiliasi tidak diketahui1
I Made SuartaAfiliasi tidak diketahui1
I Putu Gede Sopan RahtikaAfiliasi tidak diketahui1
Putu Wijaya SunuAfiliasi tidak diketahui1
Achmad WiboloPoliteknik Negeri Bali1
I Putu Gede Sopan RahtikaPoliteknik Negeri Bali1
Anak Agung Ngurah Bagus MulawarmanPoliteknik Negeri Bali1
I N. G. SastrawanPoliteknik Negeri Bali1
Bagus RadityaPoliteknik Negeri Bali1
I Ketut SuparwikaPoliteknik Negeri Bali1
I Putu Sandi RadityaPoliteknik Negeri Bali1
Kadek Agus Mahabojana D.P.Warmadewa University1

Afiliasi berasal dari OpenAlex; metadata OAI-PMH jurnal tidak memuatnya. Penulis tanpa ID OpenAlex dicocokkan berdasarkan nama, sehingga dua orang bisa tergabung atau satu orang bisa terpisah.

Sumber metadata: OAI-PMH (metadata jurnal) https://ojs2.pnb.ac.id/index.php/LOGIC/oai, pertama di-harvest 19 Nov 2026, terakhir terlihat 19 Nov 2026.
Metadata asli (oai_dc)
<oai_dc:dc xmlns="http://www.openarchives.org/OAI/2.0/" xmlns:dc="http://purl.org/dc/elements/1.1/" xmlns:oai_dc="http://www.openarchives.org/OAI/2.0/oai_dc/" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:schemaLocation="http://www.openarchives.org/OAI/2.0/oai_dc/  http://www.openarchives.org/OAI/2.0/oai_dc.xsd">
	<dc:title xml:lang="en-US">Design of Clean Water Booster Pump for High-Rise Buildings</dc:title>
	<dc:creator>Luh Putu Ike Midiani</dc:creator>
	<dc:creator>I Made Duta Irawan</dc:creator>
	<dc:creator>Bangse, Ketut</dc:creator>
	<dc:creator>Gunung, I Nyoman</dc:creator>
	<dc:subject xml:lang="en-US">booster pump</dc:subject>
	<dc:subject xml:lang="en-US">clean water</dc:subject>
	<dc:subject xml:lang="en-US">high-rise building</dc:subject>
	<dc:description xml:lang="en-US">A sanitary system is a supporting component designed to meet the clean water requirements of a building, primarily for sanitation activities. The average sanitary equipment used typically requires a shower pressure of ±1 Bar. However, the shower pressure can be significantly affected by factors such as the distance from the top tank and the building's layout, considering only the pressure due to gravity. To address inadequate shower pressure, an auxiliary pump known as a booster pump is necessary. The need for a booster pump is determined by the cumulative demand from plumbing equipment, where the total capacity required is 6057 liters/hour. To address this demand, the system employs two pump units, each with a capacity of 3 m3/hour. The distribution pipes utilized in the system adhere to established standards and are made of random polypropylene with a diameter of 2 inches and a flow rate of 0.005889 m3/second. The overall head loss resulting from this installation amounts to 31.62 meters. To accommodate the booster system, a pressure tank with a capacity of 67 liters is employed. The minimum working pressure required for the pumps is 1.8 Bar.</dc:description>
	<dc:publisher xml:lang="en-US">Unit Publikasi Ilmiah, P3M, Politeknik Negeri Bali</dc:publisher>
	<dc:date>2023-11-30</dc:date>
	<dc:type>info:eu-repo/semantics/article</dc:type>
	<dc:type>info:eu-repo/semantics/publishedVersion</dc:type>
	<dc:format>application/pdf</dc:format>
	<dc:identifier>https://ojs2.pnb.ac.id/index.php/LOGIC/article/view/1294</dc:identifier>
	<dc:identifier>10.31940/logic.v23i3.203-211</dc:identifier>
	<dc:source xml:lang="en-US"> Logic : Jurnal Rancang Bangun dan Teknologi; Vol. 23 No. 3 (2023): November; 203-211</dc:source>
	<dc:source>2580-5649</dc:source>
	<dc:source>1412-114X</dc:source>
	<dc:source>10.31940/logic.v23i3</dc:source>
	<dc:language>eng</dc:language>
	<dc:relation>https://ojs2.pnb.ac.id/index.php/LOGIC/article/view/1294/700</dc:relation>
	<dc:rights xml:lang="en-US">Copyright (c) 2023  Logic : Jurnal Rancang Bangun dan Teknologi</dc:rights>
	<dc:rights xml:lang="en-US">https://scholar.google.co.id/citations?user=smBuD3gAAAAJ&amp;hl=id</dc:rights>
</oai_dc:dc>