Melola Discovery

← Melola Discovery

Jurnal SINTA 3

The Effect of Composition and Type of Metal Filler on Heat Resistance of Silica Rubber Matric Composites

Logic: Jurnal Rancang Bangun dan Teknologi · Vol. 23 No. 3 (2023) · hlm. 169–174

DOI
10.31940/logic.v23i3.169-174
ISSN
2580-5649, 1412-114X
Terbit
2023-11-30
Penerbit
Unit Publikasi Ilmiah, P3M, Politeknik Negeri Bali
Bahasa
eng

Abstrak

Thermal Tensioning is one of the methods use to minimise the occurrence of residual stress and unwanted distorsion during welding. One of the thermal tensioning methods is Static Thermal Tensioning (STT), which involves countering thermal stress during welding. The STT method requires an active cooling behind the welding line. Several properties are required for the coolant material, such as thermal conductivity, heat resistance, and good flexibility. To achieve the desired properties, a mixture of different materials was used, commonly called a composite. The purpose of this study is to know the effect of filler metal composition and type on the heat resistance of silica rubber matric composites. This study used 2 independent variables: the filler composition in composites with variations of K1 (60%) and K2 (70%), and the type of filler metal, aluminium and copper powder with variation J1 (100%-0%), J2 (75%-25%), J3 (50%-50%), J4 (25%-75%), and J5 (0-100%). The testing process used Thermogravimetry Analysis (TGA) method with replication 2 times. The results of this study showed the specimens with K1;J1 composition,containing 60% pure aluminium filler metal, showed the best heat resistance with a final weight of 88,25%. While specimens with K2;J5 composition, containing 70% pure copper filler metal, showed the worst heat resistance with a final weight of 74,25%.

Kata kunci

Jaringan kolaborasi para penulis

28 penulis · 74 tautan kepenulisan bersama · 7 lintas organisasi

Arahkan kursor atau ketuk sebuah nama untuk menyorot rekan penulisnya. Klik dua kali untuk membuka halaman penulis.

  • Politeknik Negeri Malang
  • Universitas Gadjah Mada
  • State University of Semarang
  • Lambung Mangkurat University
  • Afiliasi tidak diketahui
  • Organisasi berbeda
  • Organisasi sama
  • Afiliasi tidak diketahui
  • Garis lebih tebal = lebih banyak artikel bersama · lingkaran lebih besar = lebih banyak artikel
Tampilkan sebagai tabel
Rekan penulisOrganisasiArtikel bersama
SubagiyoAfiliasi tidak diketahui2
Syamsul HadiPoliteknik Negeri Malang2
MaryonoAfiliasi tidak diketahui1
WinarsihState University of Semarang1
Syahrul FauziUniversitas Gadjah Mada1
Syamsul HadiPoliteknik Negeri Malang1
SarjiyanaAfiliasi tidak diketahui1
Sudarmadji .Afiliasi tidak diketahui1
Nila AliaPoliteknik Negeri Malang1
Bambang IrawanLambung Mangkurat University1
Hangga WicaksonoPoliteknik Negeri Malang1
Andhika Erlangga Setiawan PutraPoliteknik Negeri Malang1
Sza Sya Monica ValeriaPoliteknik Negeri Malang1
Samsul HadiPoliteknik Negeri Malang1
Muhamad Zidan WibowoPoliteknik Negeri Malang1
Muhammad Naufal Abiyyi HutagalungPoliteknik Negeri Malang1
Firman DwiyantoPoliteknik Negeri Malang1
Dadang KurniawanPoliteknik Negeri Malang1
Sugeng Hadi SusiloPoliteknik Negeri Malang1
Zahratul JannahPoliteknik Negeri Malang1
Imam MashudiPoliteknik Negeri Malang1
Agus HardjitoPoliteknik Negeri Malang1
Listiono ListionoPoliteknik Negeri Malang1

Afiliasi berasal dari OpenAlex; metadata OAI-PMH jurnal tidak memuatnya. Penulis tanpa ID OpenAlex dicocokkan berdasarkan nama, sehingga dua orang bisa tergabung atau satu orang bisa terpisah.

Sumber metadata: OAI-PMH (metadata jurnal) https://ojs2.pnb.ac.id/index.php/LOGIC/oai, pertama di-harvest 19 Nov 2026, terakhir terlihat 19 Nov 2026.
Metadata asli (oai_dc)
<oai_dc:dc xmlns="http://www.openarchives.org/OAI/2.0/" xmlns:dc="http://purl.org/dc/elements/1.1/" xmlns:oai_dc="http://www.openarchives.org/OAI/2.0/oai_dc/" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:schemaLocation="http://www.openarchives.org/OAI/2.0/oai_dc/  http://www.openarchives.org/OAI/2.0/oai_dc.xsd">
	<dc:title xml:lang="en-US">The Effect of Composition and Type of Metal Filler on Heat Resistance of Silica Rubber Matric Composites</dc:title>
	<dc:creator>Takwim, R.N. Akhsanu </dc:creator>
	<dc:creator>Murdani, Anggit</dc:creator>
	<dc:creator>Purwoko</dc:creator>
	<dc:creator>Pranoto, Bayu </dc:creator>
	<dc:creator>Putra, Naufal Reza</dc:creator>
	<dc:subject xml:lang="en-US">alumunium</dc:subject>
	<dc:subject xml:lang="en-US">composite</dc:subject>
	<dc:subject xml:lang="en-US">copper</dc:subject>
	<dc:subject xml:lang="en-US">heat resistance</dc:subject>
	<dc:subject xml:lang="en-US">silica rubber</dc:subject>
	<dc:description xml:lang="en-US">Thermal Tensioning is one of the methods use to minimise the occurrence of residual stress and unwanted distorsion during welding. One of the thermal tensioning methods is Static Thermal Tensioning (STT), which involves countering thermal stress during welding. The STT method requires an active cooling behind the welding line. Several properties are required for the coolant material, such as thermal conductivity, heat resistance, and good flexibility. To achieve the desired properties, a mixture of different materials was used, commonly called a composite. The purpose of this study is to know the effect of filler metal composition and type on the heat resistance of silica rubber matric composites. This study used 2 independent variables: the filler composition in composites with variations of K1 (60%) and K2 (70%), and the type of filler metal, aluminium and copper powder with variation J1 (100%-0%), J2 (75%-25%), J3 (50%-50%), J4 (25%-75%), and J5 (0-100%). The testing process used Thermogravimetry Analysis (TGA) method with replication 2 times. The results of this study showed the specimens with K1;J1 composition,containing 60% pure aluminium filler metal, showed the best heat resistance with a final weight of 88,25%. While specimens with K2;J5 composition, containing 70% pure copper filler metal, showed the worst heat resistance with a final weight of 74,25%.</dc:description>
	<dc:publisher xml:lang="en-US">Unit Publikasi Ilmiah, P3M, Politeknik Negeri Bali</dc:publisher>
	<dc:date>2023-11-30</dc:date>
	<dc:type>info:eu-repo/semantics/article</dc:type>
	<dc:type>info:eu-repo/semantics/publishedVersion</dc:type>
	<dc:format>application/pdf</dc:format>
	<dc:identifier>https://ojs2.pnb.ac.id/index.php/LOGIC/article/view/1318</dc:identifier>
	<dc:identifier>10.31940/logic.v23i3.169-174</dc:identifier>
	<dc:source xml:lang="en-US"> Logic : Jurnal Rancang Bangun dan Teknologi; Vol. 23 No. 3 (2023): November; 169-174</dc:source>
	<dc:source>2580-5649</dc:source>
	<dc:source>1412-114X</dc:source>
	<dc:source>10.31940/logic.v23i3</dc:source>
	<dc:language>eng</dc:language>
	<dc:relation>https://ojs2.pnb.ac.id/index.php/LOGIC/article/view/1318/683</dc:relation>
	<dc:rights xml:lang="en-US">Copyright (c) 2023  Logic : Jurnal Rancang Bangun dan Teknologi</dc:rights>
	<dc:rights xml:lang="en-US">https://scholar.google.co.id/citations?user=smBuD3gAAAAJ&amp;hl=id</dc:rights>
</oai_dc:dc>