Melola Discovery

← Melola Discovery

Jurnal SINTA 3

EFFECT OF STATIC THERMAL TENSIONING AND PREHEATING ON ANGULAR DISTORTION IN FCAW WELDED SS400 STEEL CORNER JOINTS

Logic: Jurnal Rancang Bangun dan Teknologi · Vol. 24 No. 2 (2024) · hlm. 39–48

DOI
10.31940/logic.v24i2.39-48
ISSN
2580-5649, 1412-114X
Terbit
2024-07-31
Penerbit
Unit Publikasi Ilmiah, P3M, Politeknik Negeri Bali
Bahasa
eng

Abstrak

FCAW welding is an automated welding process that employs a wire roll electrode to melt metal, using flux or powder within the electrode's core for protection. A common issue with FCAW welding is the occurrence of angular distortion and alterations in the length and width dimensions, particularly in thin plate iron materials, due to residual stresses from the welding process. This research aims to assess the impact of static thermal tensioning, preheating, and their combination on angular distortion in SS400 steel corner joints during FCAW welding, considering heat input during welding. True experimental research methodology was employed, with variations in preheating temperatures of 200°C, 250°C, 300°C, static thermal tensioning at 150°C, 200°C, 250°C, transient thermal tensioning at 150°C, 200°C, 250°C, and a reference method with no treatment to determine the welding approach that minimizes angular distortion. The material used was 3mm thick SS400 steel. Data analysis was performed using Minitab 18 software and the One-Way Anova method. The research results indicate a significant influence of static thermal tensioning, preheating, and their combination on angular distortion. The optimal welding methods identified are preheating-static thermal tensioning at 89°55', preheating-transient thermal tensioning at 89°50', static thermal tensioning at 150°C at 89°45', transient thermal tensioning at 150°C at 89°40', and preheating at 200°C at 89°35'.

Kata kunci

Jaringan kolaborasi para penulis

40 penulis · 113 tautan kepenulisan bersama · 24 lintas organisasi · menampilkan 40 yang paling banyak terhubung

Arahkan kursor atau ketuk sebuah nama untuk menyorot rekan penulisnya. Klik dua kali untuk membuka halaman penulis.

  • Universitas Halu Oleo
  • Institut Teknologi, Sains, dan Kesehatan RS.DR. Soepraoen Kesdam V/BRW
  • Politeknik Negeri Malang
  • Jenderal Soedirman University
  • Universitas Gadjah Mada
  • Indonesia University of Education
  • State University of Malang
  • Organisasi lain
  • Afiliasi tidak diketahui
  • Organisasi berbeda
  • Organisasi sama
  • Afiliasi tidak diketahui
  • Garis lebih tebal = lebih banyak artikel bersama · lingkaran lebih besar = lebih banyak artikel
Tampilkan sebagai tabel
Rekan penulisOrganisasiArtikel bersama
Nurnaningsih HamzahUniversitas Halu Oleo2
Damairia Hayu ParmasariJenderal Soedirman University2
Sitti MarwahUniversitas Halu Oleo1
Niken PujirahayuUniversitas Halu Oleo1
Nurhayati HadjarUniversitas Halu Oleo1
Zakiah UslinawatyUniversitas Halu Oleo1
Mustika SariUniversitas Halu Oleo1
Sahindomi BanaUniversitas Halu Oleo1
Abigael KabeUniversitas Halu Oleo1
Rosmarlinasiah RosmarlinasiahUniversitas Halu Oleo1
I Made Arya IrmawanAfiliasi tidak diketahui1
La Ode Agus Salim MandoAfiliasi tidak diketahui1
Yusran YusranUniversitas Halu Oleo1
Muh. DassirAfiliasi tidak diketahui1
Adhetya KurniawanAfiliasi tidak diketahui1
Alif Dimas SunaryoAfiliasi tidak diketahui1
Anies SetiowatiAfiliasi tidak diketahui1
Annes Rindy PermanaInstitut Teknologi, Sains, dan Kesehatan RS.DR. Soepraoen Kesdam V/BRW1
Widigdo Rekso NegoroInstitut Teknologi, Sains, dan Kesehatan RS.DR. Soepraoen Kesdam V/BRW1
Sindu SintaraInstitut Teknologi, Sains, dan Kesehatan RS.DR. Soepraoen Kesdam V/BRW1
Muhammad RodliInstitut Teknologi, Sains, dan Kesehatan RS.DR. Soepraoen Kesdam V/BRW1
Reko PriyonggoInstitut Teknologi, Sains, dan Kesehatan RS.DR. Soepraoen Kesdam V/BRW1
Junun SartohadiUniversitas Gadjah Mada1
Mudrajat KuncoroUniversitas Gadjah Mada1
Achmad DjunaediUniversitas Gadjah Mada1
, SudaryonoAfiliasi tidak diketahui1
Poppy PuspitasariState University of Malang1
Diki Dwi PramonoState University of Malang1
Haipan SalamIndonesia University of Education1
Mohammad TauviqirrahmanDiponegoro University1
Heryanto .Afiliasi tidak diketahui1
Nur UlfahJenderal Soedirman University1
Windri Lesmana RubaiJenderal Soedirman University1
Danang IsnubrotoPoliteknik Negeri Semarang1

Afiliasi berasal dari OpenAlex; metadata OAI-PMH jurnal tidak memuatnya. Penulis tanpa ID OpenAlex dicocokkan berdasarkan nama, sehingga dua orang bisa tergabung atau satu orang bisa terpisah.

Sumber metadata: OAI-PMH (metadata jurnal) https://ojs2.pnb.ac.id/index.php/LOGIC/oai, pertama di-harvest 19 Nov 2026, terakhir terlihat 19 Nov 2026.
Metadata asli (oai_dc)
<oai_dc:dc xmlns="http://www.openarchives.org/OAI/2.0/" xmlns:dc="http://purl.org/dc/elements/1.1/" xmlns:oai_dc="http://www.openarchives.org/OAI/2.0/oai_dc/" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:schemaLocation="http://www.openarchives.org/OAI/2.0/oai_dc/  http://www.openarchives.org/OAI/2.0/oai_dc.xsd">
	<dc:title xml:lang="en-US">EFFECT OF STATIC THERMAL TENSIONING AND PREHEATING ON ANGULAR DISTORTION IN FCAW WELDED SS400 STEEL CORNER JOINTS</dc:title>
	<dc:creator>Susilo, Sugeng Hadi</dc:creator>
	<dc:creator>yudiyanto, eko</dc:creator>
	<dc:creator>Setiawan, Agus </dc:creator>
	<dc:creator>Khambali, Khambali</dc:creator>
	<dc:creator>Suryanto</dc:creator>
	<dc:creator>Alauddin, Falih</dc:creator>
	<dc:subject xml:lang="en-US">angular distortion</dc:subject>
	<dc:subject xml:lang="en-US">SS400 steel</dc:subject>
	<dc:subject xml:lang="en-US">FCAW welding</dc:subject>
	<dc:description xml:lang="en-US">FCAW welding is an automated welding process that employs a wire roll electrode to melt metal, using flux or powder within the electrode's core for protection. A common issue with FCAW welding is the occurrence of angular distortion and alterations in the length and width dimensions, particularly in thin plate iron materials, due to residual stresses from the welding process.
This research aims to assess the impact of static thermal tensioning, preheating, and their combination on angular distortion in SS400 steel corner joints during FCAW welding, considering heat input during welding. True experimental research methodology was employed, with variations in preheating temperatures of 200°C, 250°C, 300°C, static thermal tensioning at 150°C, 200°C, 250°C, transient thermal tensioning at 150°C, 200°C, 250°C, and a reference method with no treatment to determine the welding approach that minimizes angular distortion. The material used was 3mm thick SS400 steel. Data analysis was performed using Minitab 18 software and the One-Way Anova method.
The research results indicate a significant influence of static thermal tensioning, preheating, and their combination on angular distortion. The optimal welding methods identified are preheating-static thermal tensioning at 89°55', preheating-transient thermal tensioning at 89°50', static thermal tensioning at 150°C at 89°45', transient thermal tensioning at 150°C at 89°40', and preheating at 200°C at 89°35'.</dc:description>
	<dc:publisher xml:lang="en-US">Unit Publikasi Ilmiah, P3M, Politeknik Negeri Bali</dc:publisher>
	<dc:date>2024-07-31</dc:date>
	<dc:type>info:eu-repo/semantics/article</dc:type>
	<dc:type>info:eu-repo/semantics/publishedVersion</dc:type>
	<dc:format>application/pdf</dc:format>
	<dc:identifier>https://ojs2.pnb.ac.id/index.php/LOGIC/article/view/1372</dc:identifier>
	<dc:identifier>10.31940/logic.v24i2.39-48</dc:identifier>
	<dc:source xml:lang="en-US"> Logic : Jurnal Rancang Bangun dan Teknologi; Vol. 24 No. 2 (2024): July; 39-48</dc:source>
	<dc:source>2580-5649</dc:source>
	<dc:source>1412-114X</dc:source>
	<dc:source>10.31940/logic.v24i2</dc:source>
	<dc:language>eng</dc:language>
	<dc:relation>https://ojs2.pnb.ac.id/index.php/LOGIC/article/view/1372/871</dc:relation>
	<dc:rights xml:lang="en-US">Copyright (c) 2024  Logic : Jurnal Rancang Bangun dan Teknologi</dc:rights>
	<dc:rights xml:lang="en-US">https://scholar.google.co.id/citations?user=smBuD3gAAAAJ&amp;hl=id</dc:rights>
</oai_dc:dc>