Melola Discovery

← Melola Discovery

Jurnal SINTA 3

SIMULATION OF THE INFLUENCE OF FIBER VOLUME FRACTION AND FIBER ORIENTATION ON THE STRENGTH OF POLYESTER COMPOSITE REINFORCED WITH GLASS FIBER IN BENDING STRENGTH

Logic: Jurnal Rancang Bangun dan Teknologi · Vol. 24 No. 2 (2024) · hlm. 79–86

DOI
10.31940/logic.v24i2.79-86
ISSN
2580-5649, 1412-114X
Terbit
2024-07-31
Penerbit
Unit Publikasi Ilmiah, P3M, Politeknik Negeri Bali
Bahasa
eng

Abstrak

Fiber-reinforced composites can be classified into two parts, namely short fiber composites and long fiber composites. Long fibers are generally stronger than short fibers. Long fiber (continuous fiber) is more efficient in laying than short fiber but short fiber is easier to lay than long fiber. Fiber length affects the processability of the fiber composite. Judging from the theory, long fibers can transfer the load and stress from the stress point to the other fiber. In this research, we simulated the effects of volume fraction and fiber orientation in glass fiber-reinforced polyester composites on bending strength to examine the effect of each parameter on the mechanical properties of glass fiber composites. The mechanical properties of the composite were tested using the three-point bending and tensile testing methods. The study expects to find variations in mechanical properties with changes in the glass fiber volume fraction and fiber orientation. In this study, it is planned to function in a relevant environment, the components in this study must be able to operate properly and have been well integrated with prototype manufacturing that has been tested as a test tool function. Notably, the pinnacle of the bending test, measuring 170.41 MPa, was achieved at the specific combination of a 0.5 Fiber Volume Fraction and the 0-90o fiber orientation.

Kata kunci

Jaringan kolaborasi para penulis

15 penulis · 33 tautan kepenulisan bersama

Arahkan kursor atau ketuk sebuah nama untuk menyorot rekan penulisnya. Klik dua kali untuk membuka halaman penulis.

  • Politeknik Negeri Malang
  • Organisasi berbeda
  • Organisasi sama
  • Afiliasi tidak diketahui
  • Garis lebih tebal = lebih banyak artikel bersama · lingkaran lebih besar = lebih banyak artikel
Tampilkan sebagai tabel
Rekan penulisOrganisasiArtikel bersama
Agus HardjitoPoliteknik Negeri Malang2
Haris Puspito BuwonoPoliteknik Negeri Malang1
Agus DaniPoliteknik Negeri Malang1
Utsman Syah AmrullahPoliteknik Negeri Malang1
Rilis Eka PerkasaPoliteknik Negeri Malang1
Zakiyah AmaliaPoliteknik Negeri Malang1
Talifatim MachfurohPoliteknik Negeri Malang1
Siti Duratun Nasiqiati RosadyPoliteknik Negeri Malang1
SubagiyoPoliteknik Negeri Malang1
R.N. Akhsanu TakwimPoliteknik Negeri Malang1
Listiono ListionoPoliteknik Negeri Malang1

Afiliasi berasal dari OpenAlex; metadata OAI-PMH jurnal tidak memuatnya. Penulis tanpa ID OpenAlex dicocokkan berdasarkan nama, sehingga dua orang bisa tergabung atau satu orang bisa terpisah.

Sumber metadata: OAI-PMH (metadata jurnal) https://ojs2.pnb.ac.id/index.php/LOGIC/oai, pertama di-harvest 19 Nov 2026, terakhir terlihat 19 Nov 2026.
Metadata asli (oai_dc)
<oai_dc:dc xmlns="http://www.openarchives.org/OAI/2.0/" xmlns:dc="http://purl.org/dc/elements/1.1/" xmlns:oai_dc="http://www.openarchives.org/OAI/2.0/oai_dc/" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:schemaLocation="http://www.openarchives.org/OAI/2.0/oai_dc/  http://www.openarchives.org/OAI/2.0/oai_dc.xsd">
	<dc:title xml:lang="en-US">SIMULATION OF THE INFLUENCE OF FIBER VOLUME FRACTION AND FIBER ORIENTATION ON THE STRENGTH OF POLYESTER COMPOSITE REINFORCED WITH GLASS FIBER IN BENDING STRENGTH</dc:title>
	<dc:creator>Fakhruddin, Muhammad</dc:creator>
	<dc:creator>Mashudi, Imam</dc:creator>
	<dc:creator>Pramita Sari, Nurlia</dc:creator>
	<dc:creator>Widhi Supriyanto, Nicky Suwandhy</dc:creator>
	<dc:subject xml:lang="en-US">Volume fraction, composite, fiberglass, simulation,.3-point  bending</dc:subject>
	<dc:description xml:lang="en-US">Fiber-reinforced composites can be classified into two parts, namely short fiber composites and long fiber composites. Long fibers are generally stronger than short fibers. Long fiber (continuous fiber) is more efficient in laying than short fiber but short fiber is easier to lay than long fiber. Fiber length affects the processability of the fiber composite. Judging from the theory, long fibers can transfer the load and stress from the stress point to the other fiber. In this research, we simulated the effects of volume fraction and fiber orientation in glass fiber-reinforced polyester composites on bending strength to examine the effect of each parameter on the mechanical properties of glass fiber composites. The mechanical properties of the composite were tested using the three-point bending and tensile testing methods. The study expects to find variations in mechanical properties with changes in the glass fiber volume fraction and fiber orientation. In this study, it is planned to function in a relevant environment, the components in this study must be able to operate properly and have been well integrated with prototype manufacturing that has been tested as a test tool function. Notably, the pinnacle of the bending test, measuring 170.41 MPa, was achieved at the specific combination of a 0.5 Fiber Volume Fraction and the 0-90o fiber orientation.</dc:description>
	<dc:publisher xml:lang="en-US">Unit Publikasi Ilmiah, P3M, Politeknik Negeri Bali</dc:publisher>
	<dc:date>2024-07-31</dc:date>
	<dc:type>info:eu-repo/semantics/article</dc:type>
	<dc:type>info:eu-repo/semantics/publishedVersion</dc:type>
	<dc:format>application/pdf</dc:format>
	<dc:identifier>https://ojs2.pnb.ac.id/index.php/LOGIC/article/view/1463</dc:identifier>
	<dc:identifier>10.31940/logic.v24i2.79-86</dc:identifier>
	<dc:source xml:lang="en-US"> Logic : Jurnal Rancang Bangun dan Teknologi; Vol. 24 No. 2 (2024): July; 79-86</dc:source>
	<dc:source>2580-5649</dc:source>
	<dc:source>1412-114X</dc:source>
	<dc:source>10.31940/logic.v24i2</dc:source>
	<dc:language>eng</dc:language>
	<dc:relation>https://ojs2.pnb.ac.id/index.php/LOGIC/article/view/1463/881</dc:relation>
	<dc:rights xml:lang="en-US">Copyright (c) 2024  Logic : Jurnal Rancang Bangun dan Teknologi</dc:rights>
	<dc:rights xml:lang="en-US">https://scholar.google.co.id/citations?user=smBuD3gAAAAJ&amp;hl=id</dc:rights>
</oai_dc:dc>