Melola Discovery

← Melola Discovery

Jurnal SINTA 3

INVESTIGATION OF TEMPERATURES AND HOLDING TIMES ON HIGH-STRENGTH LOW-ALLOY STEEL FOR TANK TRACK LINKS

Logic: Jurnal Rancang Bangun dan Teknologi · Vol. 24 No. 2 (2024) · hlm. 87–92

DOI
10.31940/logic.v24i2.87-92
ISSN
2580-5649, 1412-114X
Terbit
2024-07-31
Penerbit
Unit Publikasi Ilmiah, P3M, Politeknik Negeri Bali
Bahasa
eng

Abstrak

In Indonesia, the reliance on foreign countries for military components persists, including tank track links which are crucial for combat vehicles. These components require mechanical properties such as wear resistance and toughness to ensure high safety standards. High Strength Low Alloy (HSLA) steel is used, necessitating precise composition and appropriate heat treatment processes. This study varied compositions and heat treatments to achieve desired properties, producing prototypes with five predetermined compositions. The heat treatment process involves initially heating the samples to 860°C for 30 minutes for uniformity, followed by various treatments including quenching in oil, normalizing, and multiple cycles of quenching with tempering at different temperatures and durations to refine microstructure and adjust hardness of the alloy. Results showed optimal mechanical properties in composition no. 4 after normalizing with a blower, achieving a hardness of 31 HRC. This research aimed to optimize mechanical performance during operational conditions through variations in temperatures and holding times.

Kata kunci

Jaringan kolaborasi para penulis

18 penulis · 39 tautan kepenulisan bersama · 12 lintas organisasi

Arahkan kursor atau ketuk sebuah nama untuk menyorot rekan penulisnya. Klik dua kali untuk membuka halaman penulis.

  • Politeknik Negeri Bali
  • Universitas Widyatama
  • Universitas Jenderal Achmad Yani
  • National Research and Innovation Agency
  • Bandung Institute of Technology
  • Sumatera Institute of Technology
  • Organisasi berbeda
  • Organisasi sama
  • Afiliasi tidak diketahui
  • Garis lebih tebal = lebih banyak artikel bersama · lingkaran lebih besar = lebih banyak artikel
Tampilkan sebagai tabel
Rekan penulisOrganisasiArtikel bersama
Risa Nurin BaitiPoliteknik Negeri Bali5
I Wayan Padma Yogi AsanaPoliteknik Negeri Bali3
Ayu Zahra ChandrasariUniversitas Widyatama1
I Wayan TemajaPoliteknik Negeri Bali1
Ida Ayu Anom ArsaniPoliteknik Negeri Bali1
I Gede Artha NegaraPoliteknik Negeri Bali1
I Nyoman Gede BaliartaPoliteknik Negeri Bali1
I Wayan SutinaPoliteknik Negeri Bali1
M KusumaPoliteknik Negeri Bali1
I Putu Gede Sopan RahtikaPoliteknik Negeri Bali1
Amadeus RenaldyPoliteknik Negeri Bali1
Ahmad RajaniNational Research and Innovation Agency1
Hilman MafaziUniversitas Widyatama1
Ni Luh Wisma Eka YantiBandung Institute of Technology1
Anisa FitriSumatera Institute of Technology1

Afiliasi berasal dari OpenAlex; metadata OAI-PMH jurnal tidak memuatnya. Penulis tanpa ID OpenAlex dicocokkan berdasarkan nama, sehingga dua orang bisa tergabung atau satu orang bisa terpisah.

Sumber metadata: OAI-PMH (metadata jurnal) https://ojs2.pnb.ac.id/index.php/LOGIC/oai, pertama di-harvest 19 Nov 2026, terakhir terlihat 19 Nov 2026.
Metadata asli (oai_dc)
<oai_dc:dc xmlns="http://www.openarchives.org/OAI/2.0/" xmlns:dc="http://purl.org/dc/elements/1.1/" xmlns:oai_dc="http://www.openarchives.org/OAI/2.0/oai_dc/" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:schemaLocation="http://www.openarchives.org/OAI/2.0/oai_dc/  http://www.openarchives.org/OAI/2.0/oai_dc.xsd">
	<dc:title xml:lang="en-US">INVESTIGATION OF TEMPERATURES AND HOLDING TIMES ON HIGH-STRENGTH LOW-ALLOY STEEL  FOR TANK TRACK LINKS</dc:title>
	<dc:creator>Selly Septianissa</dc:creator>
	<dc:creator>Widantha, Komang Widhi</dc:creator>
	<dc:creator>Waldi, Muhamad</dc:creator>
	<dc:subject xml:lang="en-US">Tracklink tank</dc:subject>
	<dc:subject xml:lang="en-US">High Strength Low Alloy</dc:subject>
	<dc:subject xml:lang="en-US">Heat Treatment</dc:subject>
	<dc:description xml:lang="en-US">In Indonesia, the reliance on foreign countries for military components persists, including tank track links which are crucial for combat vehicles. These components require mechanical properties such as wear resistance and toughness to ensure high safety standards. High Strength Low Alloy (HSLA) steel is used, necessitating precise composition and appropriate heat treatment processes. This study varied compositions and heat treatments to achieve desired properties, producing prototypes with five predetermined compositions. The heat treatment process involves initially heating the samples to 860°C for 30 minutes for uniformity, followed by various treatments including quenching in oil, normalizing, and multiple cycles of quenching with tempering at different temperatures and durations to refine microstructure and adjust hardness of the alloy. Results showed optimal mechanical properties in composition no. 4 after normalizing with a blower, achieving a hardness of 31 HRC. This research aimed to optimize mechanical performance during operational conditions through variations in temperatures and holding times.</dc:description>
	<dc:publisher xml:lang="en-US">Unit Publikasi Ilmiah, P3M, Politeknik Negeri Bali</dc:publisher>
	<dc:date>2024-07-31</dc:date>
	<dc:type>info:eu-repo/semantics/article</dc:type>
	<dc:type>info:eu-repo/semantics/publishedVersion</dc:type>
	<dc:format>application/pdf</dc:format>
	<dc:identifier>https://ojs2.pnb.ac.id/index.php/LOGIC/article/view/2102</dc:identifier>
	<dc:identifier>10.31940/logic.v24i2.87-92</dc:identifier>
	<dc:source xml:lang="en-US"> Logic : Jurnal Rancang Bangun dan Teknologi; Vol. 24 No. 2 (2024): July; 87-92</dc:source>
	<dc:source>2580-5649</dc:source>
	<dc:source>1412-114X</dc:source>
	<dc:source>10.31940/logic.v24i2</dc:source>
	<dc:language>eng</dc:language>
	<dc:relation>https://ojs2.pnb.ac.id/index.php/LOGIC/article/view/2102/886</dc:relation>
	<dc:rights xml:lang="en-US">Copyright (c) 2024  Logic : Jurnal Rancang Bangun dan Teknologi</dc:rights>
	<dc:rights xml:lang="en-US">https://scholar.google.co.id/citations?user=smBuD3gAAAAJ&amp;hl=id</dc:rights>
</oai_dc:dc>