Jurnal SINTA 3
Influence of MIG Welding Process Parameters on the Strength of Bimetal Joints: Study of Gas Flow Rate and Macrofractures
Logic: Jurnal Rancang Bangun dan Teknologi · Vol. 24 No. 3 (2024) · hlm. 141–149
- ISSN
- 2580-5649, 1412-114X
- Terbit
- 2024-11-30
- Penerbit
- Unit Publikasi Ilmiah, P3M, Politeknik Negeri Bali
- Bahasa
- eng
Abstrak
Bimetal joints are often used in various industries, such as automotive, power generation, electronics, and manufacturing. This is because bimetal joints allow the joining of two types of metal with different properties. Welding two different types of metal can pose its own challenges, such as the difficulty of controlling welding parameters so that the results are optimal for both types of metal, as well as differences in the thermal and mechanical properties of the two metals. This has led to extensive research on bimetal plate connections. Based on this background, this research aims to determine the effect of variations in flow rate and current strength on the tensile strength of robotic welding bimetal welded joints, as well as determine the results of macro photos of fractures resulting from tensile tests for each variation. The research was carried out experimentally where each variation was repeated with data 3 times. Based on the results and discussion, it is known that the optimal gas flow rate in general is 20 l/min, where the tensile strength reaches 353.1442 MPa–455.5458 MPa. At this flow rate, the dominant fracture occurs in the base metal and is ductile, which indicates good plastic deformation. On the other hand, gas flow that is too low or too high causes joint defects and reduces the tensile strength. Meanwhile, other welding parameters, namely variations in welding current, affect tensile strength. At a gas flow of 10 l/min, increasing the current to 180 A produces the highest tensile strength of 449.4357 MPa with ductile fracture characteristics. However, at a current of 120 A there is a significant decrease due to overheating, especially at higher gas flows such as 20 l/min and 30 l/min, which results in brittle fracture in the heat-affected zone (HAZ). The results of this research contribute to the understanding of the influence of welding parameters on the tensile strength and fracture characteristics of bimetallic joints. This research can be a reference for the development of more efficient and reliable welding processes in various industries, such as automotive, power generation and manufacturing, which require bimetallic joints with optimal quality.
Kata kunci
Jaringan kolaborasi para penulis
28 penulis · 81 tautan kepenulisan bersama · 6 lintas organisasi
Arahkan kursor atau ketuk sebuah nama untuk menyorot rekan penulisnya. Klik dua kali untuk membuka halaman penulis.
- Politeknik Negeri Malang
- Politeknik Negeri Madiun
- Afiliasi tidak diketahui
- Organisasi berbeda
- Organisasi sama
- Afiliasi tidak diketahui
- Garis lebih tebal = lebih banyak artikel bersama · lingkaran lebih besar = lebih banyak artikel
Tampilkan sebagai tabel
| Rekan penulis | Organisasi | Artikel bersama |
|---|---|---|
| Zakiyah Amalia | Politeknik Negeri Malang | 2 |
| Siti Duratun Nasiqiati Rosady | Politeknik Negeri Malang | 2 |
| Indrazno Siradjuddin | Politeknik Negeri Malang | 1 |
| Ferdian Ronilaya | Politeknik Negeri Malang | 1 |
| Ida Lailatul Fitria | Politeknik Negeri Malang | 1 |
| Gillang Al Azhar | Politeknik Negeri Malang | 1 |
| Rendi Pambudi Wicaksono | Politeknik Negeri Madiun | 1 |
| Heru Prasetyo | Politeknik Negeri Malang | 1 |
| Pondi Udianto | Politeknik Negeri Malang | 1 |
| Sugeng Hadi Susilo | Politeknik Negeri Malang | 1 |
| Hangga Wicaksono | Politeknik Negeri Malang | 1 |
| Bima Cahya Maula Dana | Politeknik Negeri Malang | 1 |
| Syamsul | Afiliasi tidak diketahui | 1 |
| Fica Aida Nadhifatul Aini | Politeknik Negeri Malang | 1 |
| Fitrah Bisma Taimullah Al Jahfal | Politeknik Negeri Malang | 1 |
| Ardhi Prawira Rohim | Politeknik Negeri Malang | 1 |
| Nurlia Pramita Sari | Politeknik Negeri Malang | 1 |
| Agus Hardjito | Politeknik Negeri Malang | 1 |
| Subagiyo | Politeknik Negeri Malang | 1 |
| Syamsul Hadi | Politeknik Negeri Malang | 1 |
| Ahmad Hanif Firdaus | Politeknik Negeri Malang | 1 |
| Andri Setiawan | Politeknik Negeri Malang | 1 |
| Alfarizi Al Azis | Politeknik Negeri Malang | 1 |
| Vinan Viyus | Politeknik Negeri Malang | 1 |
Afiliasi berasal dari OpenAlex; metadata OAI-PMH jurnal tidak memuatnya. Penulis tanpa ID OpenAlex dicocokkan berdasarkan nama, sehingga dua orang bisa tergabung atau satu orang bisa terpisah.