Melola Discovery

← Melola Discovery

Jurnal SINTA 3

The Effect of Volume Fraction Variation on The Mechanical Properties of Epoxy-based Sugarcane Fiber Composites

Logic: Jurnal Rancang Bangun dan Teknologi · Vol. 25 No. 2 (2025) · hlm. 85–92

DOI
10.31940/logic.v25i2.85-92
ISSN
2580-5649, 1412-114X
Terbit
2025-07-27
Penerbit
Unit Publikasi Ilmiah, P3M, Politeknik Negeri Bali
Bahasa
eng

Abstrak

The use of natural fibers as reinforcement in composite materials offers an environmentally friendly alternative to synthetic fibers. Among them, sugarcane fiber (bagasse), an agro-industrial byproduct rich in cellulose, hemicellulose, and lignin, holds considerable potential but remains underutilized. This study aims to evaluate the effect of varying sugarcane fiber volume fractions (50%, 60%, and 70%) on the mechanical properties of epoxy resin-based composites. The composites were fabricated using the hand lay-up method, followed by mechanical testing including tensile tests (ASTM D3039) and bending tests (ASTM D790). The results showed that the highest tensile strength of 26.43 MPa was achieved by the E70 sample, while the E50 sample exhibited the highest bending strength at 142.53 MPa. Fractographic analysis revealed that structural defects such as voids, fiber pull-out, and debonding significantly influenced the mechanical performance of the composites. While fiber volume fraction has a notable impact on tensile and bending strengths, the relationship is not strictly linear due to variations in fiber-resin distribution and interfacial bonding quality. These findings suggest that sugarcane fiber-based epoxy composites, particularly with a 50% volume fraction, have strong potential for application in lightweight structural components, furniture panels, or automotive interior parts. Future research may focus on improving interfacial bonding through chemical treatments or hybridization with other natural fibers to further enhance performance.

Kata kunci

Jaringan kolaborasi para penulis

21 penulis · 61 tautan kepenulisan bersama · 16 lintas organisasi

Arahkan kursor atau ketuk sebuah nama untuk menyorot rekan penulisnya. Klik dua kali untuk membuka halaman penulis.

  • Sumatera Institute of Technology
  • Politeknik Negeri Bali
  • Bandung Institute of Technology
  • Organisasi berbeda
  • Organisasi sama
  • Afiliasi tidak diketahui
  • Garis lebih tebal = lebih banyak artikel bersama · lingkaran lebih besar = lebih banyak artikel
Tampilkan sebagai tabel
Rekan penulisOrganisasiArtikel bersama
Risa Nurin BaitiPoliteknik Negeri Bali3
Sena MaulanaSumatera Institute of Technology1
Rio Ardiansyah MurdaSumatera Institute of Technology1
Fajar Aditya JulyatmojoSumatera Institute of Technology1
Astri Aulia SuwandaSumatera Institute of Technology1
Muhammad Saeful FadlanSumatera Institute of Technology1
Abdul MuhyiSumatera Institute of Technology1
Muhamad F. ArifSumatera Institute of Technology1
Kardo RajagukgukSumatera Institute of Technology1
Riyan FerdiyantoSumatera Institute of Technology1
Azizul FikriSumatera Institute of Technology1
Mhd. Yasin SiregarSumatera Institute of Technology1
Faiza Armalia PutriSumatera Institute of Technology1
Ni Luh Wisma Eka YantiBandung Institute of Technology1
Komang Widhi WidanthaPoliteknik Negeri Bali1
I Wayan Padma Yogi AsanaPoliteknik Negeri Bali1

Afiliasi berasal dari OpenAlex; metadata OAI-PMH jurnal tidak memuatnya. Penulis tanpa ID OpenAlex dicocokkan berdasarkan nama, sehingga dua orang bisa tergabung atau satu orang bisa terpisah.

Sumber metadata: OAI-PMH (metadata jurnal) https://ojs2.pnb.ac.id/index.php/LOGIC/oai, pertama di-harvest 19 Nov 2026, terakhir terlihat 19 Nov 2026.
Metadata asli (oai_dc)
<oai_dc:dc xmlns="http://www.openarchives.org/OAI/2.0/" xmlns:dc="http://purl.org/dc/elements/1.1/" xmlns:oai_dc="http://www.openarchives.org/OAI/2.0/oai_dc/" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:schemaLocation="http://www.openarchives.org/OAI/2.0/oai_dc/  http://www.openarchives.org/OAI/2.0/oai_dc.xsd">
	<dc:title xml:lang="en-US">The Effect of Volume Fraction Variation on The Mechanical Properties of Epoxy-based Sugarcane Fiber Composites</dc:title>
	<dc:creator>Anisa Fitri</dc:creator>
	<dc:creator>Prasetya, Bayu</dc:creator>
	<dc:creator>Siregar, Muhammad Yasin</dc:creator>
	<dc:creator>Prakoso, Ahmad Andryan</dc:creator>
	<dc:creator>Sipahutar, Wahyu Solafide</dc:creator>
	<dc:subject xml:lang="en-US">Bending Composite</dc:subject>
	<dc:subject xml:lang="en-US">Epoxy</dc:subject>
	<dc:subject xml:lang="en-US">Sugarcane</dc:subject>
	<dc:subject xml:lang="en-US">Fiber</dc:subject>
	<dc:description xml:lang="en-US">The use of natural fibers as reinforcement in composite materials offers an environmentally friendly alternative to synthetic fibers. Among them, sugarcane fiber (bagasse), an agro-industrial byproduct rich in cellulose, hemicellulose, and lignin, holds considerable potential but remains underutilized. This study aims to evaluate the effect of varying sugarcane fiber volume fractions (50%, 60%, and 70%) on the mechanical properties of epoxy resin-based composites. The composites were fabricated using the hand lay-up method, followed by mechanical testing including tensile tests (ASTM D3039) and bending tests (ASTM D790). The results showed that the highest tensile strength of 26.43 MPa was achieved by the E70 sample, while the E50 sample exhibited the highest bending strength at 142.53 MPa. Fractographic analysis revealed that structural defects such as voids, fiber pull-out, and debonding significantly influenced the mechanical performance of the composites. While fiber volume fraction has a notable impact on tensile and bending strengths, the relationship is not strictly linear due to variations in fiber-resin distribution and interfacial bonding quality. These findings suggest that sugarcane fiber-based epoxy composites, particularly with a 50% volume fraction, have strong potential for application in lightweight structural components, furniture panels, or automotive interior parts. Future research may focus on improving interfacial bonding through chemical treatments or hybridization with other natural fibers to further enhance performance.</dc:description>
	<dc:publisher xml:lang="en-US">Unit Publikasi Ilmiah, P3M, Politeknik Negeri Bali</dc:publisher>
	<dc:date>2025-07-27</dc:date>
	<dc:type>info:eu-repo/semantics/article</dc:type>
	<dc:type>info:eu-repo/semantics/publishedVersion</dc:type>
	<dc:format>application/pdf</dc:format>
	<dc:identifier>https://ojs2.pnb.ac.id/index.php/LOGIC/article/view/2600</dc:identifier>
	<dc:identifier>10.31940/logic.v25i2.85-92</dc:identifier>
	<dc:source xml:lang="en-US"> Logic : Jurnal Rancang Bangun dan Teknologi; Vol. 25 No. 2 (2025): July; 85-92</dc:source>
	<dc:source>2580-5649</dc:source>
	<dc:source>1412-114X</dc:source>
	<dc:source>10.31940/logic.v25i2</dc:source>
	<dc:language>eng</dc:language>
	<dc:relation>https://ojs2.pnb.ac.id/index.php/LOGIC/article/view/2600/1162</dc:relation>
	<dc:rights xml:lang="en-US">Copyright (c) 2025  Logic : Jurnal Rancang Bangun dan Teknologi</dc:rights>
	<dc:rights xml:lang="en-US">https://scholar.google.co.id/citations?user=smBuD3gAAAAJ&amp;hl=id</dc:rights>
</oai_dc:dc>