Melola Discovery

← Melola Discovery

Jurnal SINTA 3

Design of Arrangement of Working Time to Increase Productivity of the Workers by Using Flat Iron at Garment “A”

Logic: Jurnal Rancang Bangun dan Teknologi · Vol. 20 No. 1 (2020) · hlm. 35–39

DOI
10.31940/logic.v20i1.1788
ISSN
2580-5649, 1412-114X
Terbit
2020-03-30
Penerbit
Pusat Penelitian dan Pengabdian kepada Masyarakat (P3M) Politeknik Negeri Bali
Bahasa
eng

Abstrak

The garments businesses in Bali grow quickly in line with the growth of tourism industry. These are proven by presence of many garment businesses in big scale investment with hundreds of workers or small -scale investments of home industries. However, the level of awareness and the failure of the business managers to seek for comfort, health, and safety for their workers remains very low. One of many problems that important in garment business for the workers in flat iron is musculoskeletal disorder. Generally, the working position is in the standing position for long time, and the hot temperature of environment resulted in the flat iron radiation. Workers that use flat iron work 9 hours per day including the lunch break and 7 day a weak, except for the big holidays or when there is less order. They start working at 08.00 a.m. until 17.00 p.m. with lunch break at 12.00 until 13.00 p.m. Arrangement for the working time and the break time, holiday, working shifts, are one of the many aspects in organization that needs to be paid attention because by arranging the working time, it may make them comfortable, safe, healthy, so it can increase the work productivity. Increasing the working time will cause the accumulating fatigues and in turn, it will decrease the productivity. Therefore, to solve that problems, this research has been done experimentally by arranging the working time, namely by providing 10 minute-breaks every two hours of working time while drinking tea. This research was conducted to 12 female workers who used flat iron in “A” garment, of Tabanan Regency, Bali, with treatment by subject design. The indicated workload was measured by heart rate with pulse meter. Musculoskeletal disorder was predicted by Nordic Body Map questionnaire. Data were analyzed by t test on 5% significant. The result of analysis showed that there was a decrease of workloads and the subjective disorders significantly before and after treatment as well as the increase of the working productivity significantly (p<0,05).

Jaringan kolaborasi para penulis

33 penulis · 110 tautan kepenulisan bersama · 40 lintas organisasi

Arahkan kursor atau ketuk sebuah nama untuk menyorot rekan penulisnya. Klik dua kali untuk membuka halaman penulis.

  • Politeknik Negeri Bali
  • Universitas Sulawesi Tenggara
  • Universitas Islam Negeri Ar-Raniry
  • Universitas Muhammadiyah Jakarta
  • Universitas Halu Oleo
  • Universitas Islam Negeri Alauddin Makassar
  • The University of Queensland
  • Afiliasi tidak diketahui
  • Organisasi berbeda
  • Organisasi sama
  • Afiliasi tidak diketahui
  • Garis lebih tebal = lebih banyak artikel bersama · lingkaran lebih besar = lebih banyak artikel
Tampilkan sebagai tabel
Rekan penulisOrganisasiArtikel bersama
I Gede Made KarmaPoliteknik Negeri Bali5
I Ketut DarmaPoliteknik Negeri Bali3
I Wayan SuasiraPoliteknik Negeri Bali3
I Ketut DarmaPoliteknik Negeri Bali2
I Ketut SutapaPoliteknik Negeri Bali2
I Gede Sastra WibawaPoliteknik Negeri Bali2
I Made TapayasaPoliteknik Negeri Bali2
La Ode MunawirUniversitas Sulawesi Tenggara1
Nindy Ade MarsalenaUniversitas Sulawesi Tenggara1
Niken Yulia YusufUniversitas Sulawesi Tenggara1
Ramli RamliUniversitas Halu Oleo1
Jhony ArjoniUniversitas Sulawesi Tenggara1
Rahmat ManafUniversitas Sulawesi Tenggara1
Rofy UsyanUniversitas Sulawesi Tenggara1
Lasania LasaniaUniversitas Sulawesi Tenggara1
Iyan SofyanUniversitas Sulawesi Tenggara1
Virya SuprayogiUniversitas Sulawesi Tenggara1
Supriadi SupriadiUniversitas Islam Negeri Alauddin Makassar1
. HasbiAfiliasi tidak diketahui1
L. RahimAfiliasi tidak diketahui1
N. AliahAfiliasi tidak diketahui1
A. MufakhirUniversitas Islam Negeri Ar-Raniry1
Muhammad Jihan RezianUniversitas Islam Negeri Ar-Raniry1
Gentur HandooyoAfiliasi tidak diketahui1
Nuraini NurainiUniversitas Islam Negeri Ar-Raniry1
Marissa Grace HaqueUniversitas Muhammadiyah Jakarta1
Rizfaldi NasriUniversitas Muhammadiyah Jakarta1
I Wayan SuastawaPoliteknik Negeri Bali1
I Made Tapa YasaPoliteknik Negeri Bali1
Ni Wayan SadiyaniPoliteknik Negeri Bali1
E IreneThe University of Queensland1

Afiliasi berasal dari OpenAlex; metadata OAI-PMH jurnal tidak memuatnya. Penulis tanpa ID OpenAlex dicocokkan berdasarkan nama, sehingga dua orang bisa tergabung atau satu orang bisa terpisah.

Sumber metadata: OAI-PMH (metadata jurnal) https://ojs.pnb.ac.id/index.php/LOGIC/oai, pertama di-harvest 19 Nov 2026, terakhir terlihat 19 Nov 2026.
Metadata asli (oai_dc)
<oai_dc:dc xmlns="http://www.openarchives.org/OAI/2.0/" xmlns:dc="http://purl.org/dc/elements/1.1/" xmlns:oai_dc="http://www.openarchives.org/OAI/2.0/oai_dc/" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:schemaLocation="http://www.openarchives.org/OAI/2.0/oai_dc/  http://www.openarchives.org/OAI/2.0/oai_dc.xsd">
	<dc:title xml:lang="en-US">Design of Arrangement of Working Time to Increase Productivity of the Workers by Using Flat Iron at Garment “A”</dc:title>
	<dc:creator>Santiana, I Made Anom</dc:creator>
	<dc:creator>Yusuf, M.</dc:creator>
	<dc:description xml:lang="en-US">The garments businesses in Bali grow quickly in line with the growth of tourism industry. These are proven by presence of many garment businesses in big scale investment with hundreds of workers or small -scale investments of home industries. However, the level of awareness and the failure of the business managers to seek for comfort, health, and safety for their workers remains very low. One of many problems that important in garment business for the workers in flat iron is musculoskeletal disorder. Generally, the working position is in the standing position for long time, and the hot temperature of environment resulted in the flat iron radiation. Workers that use flat iron work 9 hours per day including the lunch break and 7 day a weak, except for the big holidays or when there is less order. They start working at 08.00 a.m. until 17.00 p.m. with lunch break at 12.00&amp;nbsp; until 13.00 p.m. Arrangement for the working time and the break time, holiday, working shifts, are one of the many aspects in organization that needs to be paid attention because by arranging the working time, it may make them comfortable, safe, healthy, so it can increase the work productivity. Increasing the working time will cause the accumulating fatigues and in turn, it will decrease the productivity. Therefore, to solve that problems, this research has been done experimentally by arranging the working time, namely by providing 10 minute-breaks every two hours of working time while drinking tea. This research was conducted to 12 female workers who used flat iron in “A” garment, of Tabanan Regency, Bali, with treatment by subject design. The indicated workload was measured by heart rate with pulse meter. Musculoskeletal disorder was predicted by Nordic Body Map questionnaire. Data were analyzed by t test on 5% significant. The result of analysis showed that there was a decrease of workloads and the subjective disorders significantly before and after treatment as well as the increase of the working productivity significantly (p&amp;lt;0,05).</dc:description>
	<dc:publisher xml:lang="en-US">Pusat Penelitian dan Pengabdian kepada Masyarakat (P3M) Politeknik Negeri Bali</dc:publisher>
	<dc:date>2020-03-30</dc:date>
	<dc:type>info:eu-repo/semantics/article</dc:type>
	<dc:type>info:eu-repo/semantics/publishedVersion</dc:type>
	<dc:type xml:lang="en-US">Peer-reviewed Article</dc:type>
	<dc:format>application/pdf</dc:format>
	<dc:identifier>https://ojs.pnb.ac.id/index.php/LOGIC/article/view/1788</dc:identifier>
	<dc:identifier>10.31940/logic.v20i1.1788</dc:identifier>
	<dc:source xml:lang="en-US">Logic : Jurnal Rancang Bangun dan Teknologi; Vol 20 No 1 (2020): March; 35-39</dc:source>
	<dc:source>2580-5649</dc:source>
	<dc:source>1412-114X</dc:source>
	<dc:source>10.31940/logic.v20i1</dc:source>
	<dc:language>eng</dc:language>
	<dc:relation>https://ojs.pnb.ac.id/index.php/LOGIC/article/view/1788/1362</dc:relation>
	<dc:rights xml:lang="en-US">Copyright (c) 2020 Logic : Jurnal Rancang Bangun dan Teknologi</dc:rights>
</oai_dc:dc>