Melola Discovery

← Melola Discovery

Jurnal SINTA 3

Direct Displacement Based Design and Capacity Spectrum Method for Special Moment Resisting Frame

Logic: Jurnal Rancang Bangun dan Teknologi · Vol. 20 No. 1 (2020) · hlm. 6–12

DOI
10.31940/logic.v20i1.1455
ISSN
2580-5649, 1412-114X
Terbit
2020-03-30
Penerbit
Pusat Penelitian dan Pengabdian kepada Masyarakat (P3M) Politeknik Negeri Bali
Bahasa
eng

Abstrak

In designing seismic-resistant buildings, it is commonly used Forced-Based Design method. The concept of the Force-Based Design (FBD) method is based on an elastic analysis of the structure and indirectly shows the performance level of the structure towards the effects of the seismic forces. Therefore, it is required an approach that capable of analyzing and evaluating the performance of the inelastic structural response; it is called Performance-Based Design method. This paper uses two methods of Performance-Based Design, there are Direct Displacement-Based Design and Capacity Spectrum Method, by using pushover analysis. The objectives of the research are to analyze and compare the performance level of the building in inelastic condition by using these two methods. The structural model reinforced concrete special moment frames. Seismic design code that used in this study is SNI 1726:2012. The reviewed parameter values are displacement and story drift values, estimated plastic hinge response, and performance level of the building from two methods. As the results, all the parameter values of DDBD analysis are more significant than CSM. DDBD produces the drift and displacement values of 0.668 m with the rebar ratio is more significant than 1.00. While, the CSM produces the drift and displacement values of 0.501 m with the rebar ratio of 1.00. The failure mechanism of both methods indicates the strong column weak beam where the beams should fail before the columns. The structure performance level which refers to ATC-40 indicate that both DDBD method and CSM method are in Damage Control level despite displacement target of the two methods are different which is DDBD produces displacement target of 0.376 m while CSM produces the value of 0.345 m.

Jaringan kolaborasi para penulis

11 penulis · 20 tautan kepenulisan bersama

Arahkan kursor atau ketuk sebuah nama untuk menyorot rekan penulisnya. Klik dua kali untuk membuka halaman penulis.

  • Jakarta State Polytechnic
  • Organisasi berbeda
  • Organisasi sama
  • Afiliasi tidak diketahui
  • Garis lebih tebal = lebih banyak artikel bersama · lingkaran lebih besar = lebih banyak artikel
Tampilkan sebagai tabel
Rekan penulisOrganisasiArtikel bersama
Jonathan SaputraJakarta State Polytechnic4
I Ketut SucitaJakarta State Polytechnic2
Jasun Widiana PutraJakarta State Polytechnic1
Hanif Satria AjiJakarta State Polytechnic1
Oky Bima PutraJakarta State Polytechnic1
Ilham Dwiputra RamadhanJakarta State Polytechnic1
Tree Irma DindaJakarta State Polytechnic1
Hanan YurizkaJakarta State Polytechnic1
Annisaa Dina PuspitaJakarta State Polytechnic1

Afiliasi berasal dari OpenAlex; metadata OAI-PMH jurnal tidak memuatnya. Penulis tanpa ID OpenAlex dicocokkan berdasarkan nama, sehingga dua orang bisa tergabung atau satu orang bisa terpisah.

Sumber metadata: OAI-PMH (metadata jurnal) https://ojs.pnb.ac.id/index.php/LOGIC/oai, pertama di-harvest 19 Nov 2026, terakhir terlihat 19 Nov 2026.
Metadata asli (oai_dc)
<oai_dc:dc xmlns="http://www.openarchives.org/OAI/2.0/" xmlns:dc="http://purl.org/dc/elements/1.1/" xmlns:oai_dc="http://www.openarchives.org/OAI/2.0/oai_dc/" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:schemaLocation="http://www.openarchives.org/OAI/2.0/oai_dc/  http://www.openarchives.org/OAI/2.0/oai_dc.xsd">
	<dc:title xml:lang="en-US">Direct Displacement Based Design and Capacity Spectrum Method for Special Moment Resisting Frame</dc:title>
	<dc:creator>Rosyidah, Anis</dc:creator>
	<dc:creator>A.P., Nadhila Ramadhani</dc:creator>
	<dc:description xml:lang="en-US">In designing seismic-resistant buildings, it is commonly used Forced-Based Design method. The concept of the Force-Based Design (FBD) method is based on an elastic analysis of the structure and indirectly shows the performance level of the structure towards the effects of the seismic forces. Therefore, it is required an approach that capable of analyzing and evaluating the performance of the inelastic structural response; it is called Performance-Based Design method. This paper uses two methods of Performance-Based Design, there are Direct Displacement-Based Design and Capacity Spectrum Method, by using pushover analysis. The objectives of the research are to analyze and compare the performance level of the building in inelastic condition by using these two methods. The structural model reinforced concrete special moment frames. Seismic design code that used in this study is SNI 1726:2012. The reviewed parameter values are displacement and story drift values, estimated plastic hinge response, and performance level of the building from two methods. As the results, all the parameter values of DDBD analysis are more significant than CSM. DDBD produces the drift and displacement values of 0.668 m with the rebar ratio is more significant than 1.00. While, the CSM produces the drift and displacement values of 0.501 m with the rebar ratio of 1.00. The failure mechanism of both methods indicates the strong column weak beam where the beams should fail before the columns. The structure performance level which refers to ATC-40 indicate that both DDBD method and CSM method are in Damage Control level despite displacement target of the two methods are different which is DDBD produces displacement target of 0.376 m while CSM produces the value of 0.345 m.</dc:description>
	<dc:publisher xml:lang="en-US">Pusat Penelitian dan Pengabdian kepada Masyarakat (P3M) Politeknik Negeri Bali</dc:publisher>
	<dc:date>2020-03-30</dc:date>
	<dc:type>info:eu-repo/semantics/article</dc:type>
	<dc:type>info:eu-repo/semantics/publishedVersion</dc:type>
	<dc:type xml:lang="en-US">Peer-reviewed Article</dc:type>
	<dc:format>application/pdf</dc:format>
	<dc:identifier>https://ojs.pnb.ac.id/index.php/LOGIC/article/view/1455</dc:identifier>
	<dc:identifier>10.31940/logic.v20i1.1455</dc:identifier>
	<dc:source xml:lang="en-US">Logic : Jurnal Rancang Bangun dan Teknologi; Vol 20 No 1 (2020): March; 6-12</dc:source>
	<dc:source>2580-5649</dc:source>
	<dc:source>1412-114X</dc:source>
	<dc:source>10.31940/logic.v20i1</dc:source>
	<dc:language>eng</dc:language>
	<dc:relation>https://ojs.pnb.ac.id/index.php/LOGIC/article/view/1455/1330</dc:relation>
	<dc:rights xml:lang="en-US">Copyright (c) 2020 Logic : Jurnal Rancang Bangun dan Teknologi</dc:rights>
</oai_dc:dc>