Melola Discovery

← Melola Discovery

Jurnal SINTA 3

Analysis of the Effect of Temperature on Tire's Durability on Engkel Truck Vehicle

Logic: Jurnal Rancang Bangun dan Teknologi · Vol. 19 No. 1 (2019) · hlm. 20–24

DOI
10.31940/logic.v19i1.1146
ISSN
2580-5649, 1412-114X
Terbit
2019-03-30
Penerbit
Pusat Penelitian dan Pengabdian kepada Masyarakat (P3M) Politeknik Negeri Bali
Bahasa
eng

Abstrak

Tires are a very important component of a vehicle, a variety of charges are imposed on the tires when the vehicle is stationary or moving. The various loading styles directly rest on the air trapped in the tire, and cause the rise of pressure to flow in accordance with the magnitude of the various forces it receives. The rise in tire pressure mainly occurs when the vehicle is in motion, where the tire gets a compressive force from the constant load of the vehicle and the shock load due to the road contour. High pressure and rising and falling causes heat on the tire which then heat is moved to the rubber tire layer. Besides also because of the heat when the surface of the tire tread rub against the road during acceleration and braking. Assuming that heat is the main cause of tire damage then this study will try to analyze the influence of tire rubber temperature on the ability of work to withstand the air pressure in the tire. The loading received by the tire rubber coating is assumed to be the same as the tensile test that will be applied to the tire when used. This tensile test will be carried out on the rubber tire layer by heat treatment before it is tested. Temperature treatment starts from a temperature of 30 until 110 with a range of 20 degrees, with the expected stress value and the best strain obtained at that temperature range. The tire samples used in this study are two of the most used tire brands on ankle truck trucks which are the most widely used truck types. With tensile test the tire performance is generally very good at low temperature up to 70 degree temperature, above 70 degree temperature tire performance began to decrease due to the increased strain on the tire material so that the ability to resist high pressure by the pneumatic force of the wind inside the tire decreased relative Against the increase in tire temperature.

Jaringan kolaborasi para penulis

5 penulis · 7 tautan kepenulisan bersama

Arahkan kursor atau ketuk sebuah nama untuk menyorot rekan penulisnya. Klik dua kali untuk membuka halaman penulis.

  • Politeknik Negeri Bali
  • Afiliasi tidak diketahui
  • Organisasi berbeda
  • Organisasi sama
  • Afiliasi tidak diketahui
  • Garis lebih tebal = lebih banyak artikel bersama · lingkaran lebih besar = lebih banyak artikel
Tampilkan sebagai tabel
Rekan penulisOrganisasiArtikel bersama
I Wayan TemajaPoliteknik Negeri Bali1
Made Ery ArsanaPoliteknik Negeri Bali1
Anak Agung Ngurah Bagus MulawarmanPoliteknik Negeri Bali1

Afiliasi berasal dari OpenAlex; metadata OAI-PMH jurnal tidak memuatnya. Penulis tanpa ID OpenAlex dicocokkan berdasarkan nama, sehingga dua orang bisa tergabung atau satu orang bisa terpisah.

Sumber metadata: OAI-PMH (metadata jurnal) https://ojs.pnb.ac.id/index.php/LOGIC/oai, pertama di-harvest 19 Nov 2026, terakhir terlihat 19 Nov 2026.
Metadata asli (oai_dc)
<oai_dc:dc xmlns="http://www.openarchives.org/OAI/2.0/" xmlns:dc="http://purl.org/dc/elements/1.1/" xmlns:oai_dc="http://www.openarchives.org/OAI/2.0/oai_dc/" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:schemaLocation="http://www.openarchives.org/OAI/2.0/oai_dc/  http://www.openarchives.org/OAI/2.0/oai_dc.xsd">
	<dc:title xml:lang="en-US">Analysis of the Effect of Temperature on Tire's Durability on Engkel Truck Vehicle</dc:title>
	<dc:creator>Suastawa, Wayan</dc:creator>
	<dc:creator>Sukadana, Ida Bagus Putu</dc:creator>
	<dc:description xml:lang="en-US">Tires are a very important component of a vehicle, a variety of charges are imposed on the tires when the vehicle is stationary or moving. The various loading styles directly rest on the air trapped in the tire, and cause the rise of pressure to flow in accordance with the magnitude of the various forces it receives. The rise in tire pressure mainly occurs when the vehicle is in motion, where the tire gets a compressive force from the constant load of the vehicle and the shock load due to the road contour. High pressure and rising and falling causes heat on the tire which then heat is moved to the rubber tire layer. Besides also because of the heat when the surface of the tire tread rub against the road during acceleration and braking.
&amp;nbsp;&amp;nbsp;&amp;nbsp;&amp;nbsp;&amp;nbsp;&amp;nbsp;&amp;nbsp;&amp;nbsp;&amp;nbsp;&amp;nbsp;&amp;nbsp; Assuming that heat is the main cause of tire damage then this study will try to analyze the influence of tire rubber temperature on the ability of work to withstand the air pressure in the tire. The loading received by the tire rubber coating is assumed to be the same as the tensile test that will be applied to the tire when used. This tensile test will be carried out on the rubber tire layer by heat treatment before it is tested. Temperature treatment starts from a temperature of 30 until 110 with a range of 20 degrees, with the expected stress value and the best strain obtained at that temperature range. The tire samples used in this study are two of the most used tire brands on ankle truck trucks which are the most widely used truck types.
&amp;nbsp;&amp;nbsp;&amp;nbsp;&amp;nbsp;&amp;nbsp;&amp;nbsp;&amp;nbsp;&amp;nbsp;&amp;nbsp;&amp;nbsp;&amp;nbsp;&amp;nbsp;&amp;nbsp;&amp;nbsp;&amp;nbsp; With tensile test the tire performance is generally very good at low temperature up to 70 degree temperature, above 70 degree temperature tire performance began to decrease due to the increased strain on the tire material so that the ability to resist high pressure by the pneumatic force of the wind inside the tire decreased relative Against the increase in tire temperature.</dc:description>
	<dc:publisher xml:lang="en-US">Pusat Penelitian dan Pengabdian kepada Masyarakat (P3M) Politeknik Negeri Bali</dc:publisher>
	<dc:date>2019-03-30</dc:date>
	<dc:type>info:eu-repo/semantics/article</dc:type>
	<dc:type>info:eu-repo/semantics/publishedVersion</dc:type>
	<dc:type xml:lang="en-US">Peer-reviewed Article</dc:type>
	<dc:format>application/pdf</dc:format>
	<dc:identifier>https://ojs.pnb.ac.id/index.php/LOGIC/article/view/1146</dc:identifier>
	<dc:identifier>10.31940/logic.v19i1.1146</dc:identifier>
	<dc:source xml:lang="en-US">Logic : Jurnal Rancang Bangun dan Teknologi; Vol 19 No 1 (2019): March; 20-24</dc:source>
	<dc:source>2580-5649</dc:source>
	<dc:source>1412-114X</dc:source>
	<dc:source>10.31940/logic.v19i1</dc:source>
	<dc:language>eng</dc:language>
	<dc:relation>https://ojs.pnb.ac.id/index.php/LOGIC/article/view/1146/984</dc:relation>
	<dc:rights xml:lang="en-US">Copyright (c) 2019 Logic : Jurnal Rancang Bangun dan Teknologi</dc:rights>
</oai_dc:dc>