Melola Discovery

← Melola Discovery

Jurnal SINTA 3

DESIGNING PLASTIC CUPES RING CUTTING MACHINE TO INCREASE PRODUCTIVITY

Logic: Jurnal Rancang Bangun dan Teknologi · Vol. 18 No. 2 (2018) · hlm. 56–63

DOI
10.31940/logic.v18i2.972
ISSN
2580-5649, 1412-114X
Terbit
2018-07-30
Penerbit
Pusat Penelitian dan Pengabdian kepada Masyarakat (P3M) Politeknik Negeri Bali
Bahasa
eng

Abstrak

The existence of plastic makes the society’s lives easier and more practical. Recently, the various kinds of products are made from this material because the votes are more durable. Plastics also give a negative effect for the environment such as soil pollution. The purpose of designing this plastic cup ring cutting machine is to sort the kind of plastics and to accelerate the process of plastic recycling, so that the plastic processing can be done faster. The authors designed a plastic cup ring mowers with electric motor mover. The design concepts of this machine are the height of machine is: 90 mm of height with a width of 50 mm, frame in size of 50 mm x 50 mm made from angled steel. This machine uses two vertical cutting blades and one horizontal cutting blade. The activator which is used in this machine is an electric diesel 1/4 HP with the rotation speed of 1400 rpm, belt-V type A38 as a link of the diesel rotation to the spindle. It is used two pieces of cushions because the direction of the load presses is perpendicular to axis of the shaft. So it is used bearing type of UCF pillow block in the diameter of 75 mm. The cutting process is done in a standing position and the button is pressed manually by using manpower, so that the rotation can become stable. If using a machine the process of cutting a ring of plastic cup can be accelerated. Manually it can be produced approximately 5 pieces of plastic cups. But, if using a machine, it can be produced approximately14 pieces of plastic cups.

Jaringan kolaborasi para penulis

28 penulis · 83 tautan kepenulisan bersama · 9 lintas organisasi

Arahkan kursor atau ketuk sebuah nama untuk menyorot rekan penulisnya. Klik dua kali untuk membuka halaman penulis.

  • Politeknik Negeri Bali
  • Warmadewa University
  • Afiliasi tidak diketahui
  • Organisasi berbeda
  • Organisasi sama
  • Afiliasi tidak diketahui
  • Garis lebih tebal = lebih banyak artikel bersama · lingkaran lebih besar = lebih banyak artikel
Tampilkan sebagai tabel
Rekan penulisOrganisasiArtikel bersama
I Nyoman SutarnaPoliteknik Negeri Bali11
I Ketut SuhermanPoliteknik Negeri Bali8
Ida Bagus Puspa IndraPoliteknik Negeri Bali4
I Nyoman GunungPoliteknik Negeri Bali3
Kadek Agus Mahabojana D.P.Warmadewa University3
I Wayan Adi SubagiaPoliteknik Negeri Bali2
I Nyoman SuamirPoliteknik Negeri Bali2
Daud Simon AnakottaparyPoliteknik Negeri Bali2
Made Dika NugrahaWarmadewa University2
I Dewa Made PancaranaPoliteknik Negeri Bali2
I Ketut AdiPoliteknik Negeri Bali2
I Wayan TemajaPoliteknik Negeri Bali1
Ida Bagus Gde WidiantaraPoliteknik Negeri Bali1
Made Ery ArsanaPoliteknik Negeri Bali1
M. YusufPoliteknik Negeri Bali1
I Nengah Darma SusilaAfiliasi tidak diketahui1
. SudirmanAfiliasi tidak diketahui1
I Nyoman Gede BaliartaPoliteknik Negeri Bali1
I Putu Eka IdrayanaPoliteknik Negeri Bali1
Anak Agung Ngurah Dwi Indra PutraPoliteknik Negeri Bali1
Ketut BangsePoliteknik Negeri Bali1
I Putu DarmawaPoliteknik Negeri Bali1
Nyoman SutarnaPoliteknik Negeri Bali1
I Nengah Ludra AntaraAfiliasi tidak diketahui1
Kadek Agus Mahabojana Dwi PrayogaWarmadewa University1
Nyoman Angga PrabawaWarmadewa University1

Afiliasi berasal dari OpenAlex; metadata OAI-PMH jurnal tidak memuatnya. Penulis tanpa ID OpenAlex dicocokkan berdasarkan nama, sehingga dua orang bisa tergabung atau satu orang bisa terpisah.

Sumber metadata: OAI-PMH (metadata jurnal) https://ojs.pnb.ac.id/index.php/LOGIC/oai, pertama di-harvest 19 Nov 2026, terakhir terlihat 19 Nov 2026.
Metadata asli (oai_dc)
<oai_dc:dc xmlns="http://www.openarchives.org/OAI/2.0/" xmlns:dc="http://purl.org/dc/elements/1.1/" xmlns:oai_dc="http://www.openarchives.org/OAI/2.0/oai_dc/" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:schemaLocation="http://www.openarchives.org/OAI/2.0/oai_dc/  http://www.openarchives.org/OAI/2.0/oai_dc.xsd">
	<dc:title xml:lang="en-US">DESIGNING PLASTIC CUPES RING CUTTING MACHINE TO INCREASE PRODUCTIVITY</dc:title>
	<dc:creator>Wibolo, Achmad</dc:creator>
	<dc:creator>Antara, I Nengah Ludra</dc:creator>
	<dc:description xml:lang="en-US">The existence of plastic makes the society’s lives easier and more practical. Recently, the various kinds of products are made from this material because the votes are more durable. Plastics also give a negative effect for the environment such as soil pollution. The purpose of designing this plastic cup ring cutting machine is to sort the kind of plastics and to accelerate the process of plastic recycling, so that the plastic processing can be done faster. The authors designed a plastic cup ring mowers with electric motor mover. The design concepts of this machine are the height of machine is: 90 mm of height with a width of 50 mm, frame in size of 50 mm x 50 mm made from angled steel. This machine uses two vertical cutting blades and one horizontal cutting blade. The activator which is used in this machine is an electric diesel 1/4 HP with the rotation speed of 1400 rpm, belt-V type A38 as a link of the diesel rotation to the spindle. It is used two pieces of cushions because the direction of the load presses is perpendicular to axis of the shaft. So it is used bearing type of UCF pillow block in the diameter of 75 mm. The cutting process is done in a standing position and the button is pressed manually by using manpower, so that the rotation can become stable. If using a machine the process of cutting a ring of plastic cup can be accelerated. Manually it can be produced approximately 5 pieces of plastic cups. But, if using a machine, it can be produced approximately14 pieces of plastic cups.</dc:description>
	<dc:publisher xml:lang="en-US">Pusat Penelitian dan Pengabdian kepada Masyarakat (P3M) Politeknik Negeri Bali</dc:publisher>
	<dc:date>2018-07-30</dc:date>
	<dc:type>info:eu-repo/semantics/article</dc:type>
	<dc:type>info:eu-repo/semantics/publishedVersion</dc:type>
	<dc:type xml:lang="en-US">Peer-reviewed Article</dc:type>
	<dc:format>application/pdf</dc:format>
	<dc:identifier>https://ojs.pnb.ac.id/index.php/LOGIC/article/view/972</dc:identifier>
	<dc:identifier>10.31940/logic.v18i2.972</dc:identifier>
	<dc:source xml:lang="en-US">Logic : Jurnal Rancang Bangun dan Teknologi; Vol 18 No 2 (2018): July; 56-63</dc:source>
	<dc:source>2580-5649</dc:source>
	<dc:source>1412-114X</dc:source>
	<dc:source>10.31940/logic.v18i2</dc:source>
	<dc:language>eng</dc:language>
	<dc:relation>https://ojs.pnb.ac.id/index.php/LOGIC/article/view/972/774</dc:relation>
	<dc:rights xml:lang="en-US">Copyright (c) 2018 LOGIC Jurnal Rancang Bangun dan Teknologi</dc:rights>
</oai_dc:dc>