Melola Discovery

← Melola Discovery

Jurnal SINTA 3

Effect of Heat Radiation on Work Load and Gamelan Crafts Productivity

Logic: Jurnal Rancang Bangun dan Teknologi · Vol. 21 No. 1 (2021) · hlm. 64–69

DOI
10.31940/logic.v21i1.2448
ISSN
2580-5649, 1412-114X
Terbit
2021-03-30
Penerbit
Pusat Penelitian dan Pengabdian kepada Masyarakat (P3M) Politeknik Negeri Bali
Bahasa
eng

Abstrak

The production process of making gamelan in Tihingan Village still uses the traditional way, namely using prapen with an open flame both for the melting process and in the formation process. This causes the workload of craftsmen to be quite heavy due to exposure to radiant heat and dust. The results of microclimate measurement of the work environment obtained an average dry temperature of 33.2oC, an average wet temperature of 24oC. The average ball temperature was 33oC, WBGT 26.3oC and the mean humidity (RH) was 59.0%. The average light intensity at work reaches 319.2 lux. The average temperature of the furnace at low heat is 340oC and during the combustion process it reaches 860 oC. The results of measurements of air quality in the workplace include levels of NO2 17.00 µg /m3 (increased by 112.50%), SO2 5.33 µg/m3 (increased by 45.23%), CO 407.16 µg/m3 (increased by 217, 99%), oxidants (Ox) 61.00 µg/m3 (increased by 1.67%) and dust 48.50 µg/m3 (increased by 125.58%). The mean pulse of the nguwad workers reached 125.81±1.35 beats/minutes (including heavy workload). This causes the productivity of craftsmen to be low due to the increase in musculoskeletal disorders and craftsmen fatigue. To overcome this condition, the workings of the craftsmen need to be improved immediately through the application of appropriate technology in the form of furnace repair so that the flames and dust produced can be removed from the workplace, then exposure to hot air and combustion dust will no longer expose the craftsmen.

Jaringan kolaborasi para penulis

5 penulis · 7 tautan kepenulisan bersama

Arahkan kursor atau ketuk sebuah nama untuk menyorot rekan penulisnya. Klik dua kali untuk membuka halaman penulis.

  • Politeknik Negeri Bali
  • Afiliasi tidak diketahui
  • Organisasi berbeda
  • Organisasi sama
  • Afiliasi tidak diketahui
  • Garis lebih tebal = lebih banyak artikel bersama · lingkaran lebih besar = lebih banyak artikel
Tampilkan sebagai tabel
Rekan penulisOrganisasiArtikel bersama
I Made RajendraPoliteknik Negeri Bali1
I Made Agus PutrawanPoliteknik Negeri Bali1
INS WinayaAfiliasi tidak diketahui1

Afiliasi berasal dari OpenAlex; metadata OAI-PMH jurnal tidak memuatnya. Penulis tanpa ID OpenAlex dicocokkan berdasarkan nama, sehingga dua orang bisa tergabung atau satu orang bisa terpisah.

Sumber metadata: OAI-PMH (metadata jurnal) https://ojs.pnb.ac.id/index.php/LOGIC/oai, pertama di-harvest 19 Nov 2026, terakhir terlihat 19 Nov 2026.
Metadata asli (oai_dc)
<oai_dc:dc xmlns="http://www.openarchives.org/OAI/2.0/" xmlns:dc="http://purl.org/dc/elements/1.1/" xmlns:oai_dc="http://www.openarchives.org/OAI/2.0/oai_dc/" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:schemaLocation="http://www.openarchives.org/OAI/2.0/oai_dc/  http://www.openarchives.org/OAI/2.0/oai_dc.xsd">
	<dc:title xml:lang="en-US">Effect of Heat Radiation on Work Load and Gamelan Crafts Productivity</dc:title>
	<dc:creator>Suarbawa, I Ketut Gede Juli</dc:creator>
	<dc:creator>Yusuf, M.</dc:creator>
	<dc:description xml:lang="en-US">The production process of making gamelan in Tihingan Village still uses the traditional way, namely using prapen with an open flame both for the melting process and in the formation process. This causes the workload of craftsmen to be quite heavy due to exposure to radiant heat and dust. The results of microclimate measurement of the work environment obtained an average dry temperature of 33.2oC, an average wet temperature of 24oC. The average ball temperature was 33oC, WBGT 26.3oC and the mean humidity (RH) was 59.0%. The average light intensity at work reaches 319.2 lux. The average temperature of the furnace at low heat is 340oC and during the combustion process it reaches 860 oC. The results of measurements of air quality in the workplace include levels of NO2 17.00 µg /m3 (increased by 112.50%), SO2 5.33 µg/m3 (increased by 45.23%), CO 407.16 µg/m3 (increased by 217, 99%), oxidants (Ox) 61.00 µg/m3 (increased by 1.67%) and dust 48.50 µg/m3 (increased by 125.58%). The mean pulse of the nguwad workers reached 125.81±1.35 beats/minutes (including heavy workload). This causes the productivity of craftsmen to be low due to the increase in musculoskeletal disorders and craftsmen fatigue. To overcome this condition, the workings of the craftsmen need to be improved immediately through the application of appropriate technology in the form of furnace repair so that the flames and dust produced can be removed from the workplace, then exposure to hot air and combustion dust will no longer expose the craftsmen.</dc:description>
	<dc:publisher xml:lang="en-US">Pusat Penelitian dan Pengabdian kepada Masyarakat (P3M) Politeknik Negeri Bali</dc:publisher>
	<dc:date>2021-03-30</dc:date>
	<dc:type>info:eu-repo/semantics/article</dc:type>
	<dc:type>info:eu-repo/semantics/publishedVersion</dc:type>
	<dc:type xml:lang="en-US">Peer-reviewed Article</dc:type>
	<dc:format>application/pdf</dc:format>
	<dc:identifier>https://ojs.pnb.ac.id/index.php/LOGIC/article/view/2448</dc:identifier>
	<dc:identifier>10.31940/logic.v21i1.2448</dc:identifier>
	<dc:source xml:lang="en-US">Logic : Jurnal Rancang Bangun dan Teknologi; Vol 21 No 1 (2021): March; 64-69</dc:source>
	<dc:source>2580-5649</dc:source>
	<dc:source>1412-114X</dc:source>
	<dc:source>10.31940/logic.v21i1</dc:source>
	<dc:language>eng</dc:language>
	<dc:relation>https://ojs.pnb.ac.id/index.php/LOGIC/article/view/2448/1665</dc:relation>
	<dc:rights xml:lang="en-US">Copyright (c) 2021 Logic : Jurnal Rancang Bangun dan Teknologi</dc:rights>
</oai_dc:dc>