Melola Discovery

← Melola Discovery

Jurnal SINTA 3

The Effect of Mg Adding in Recycled Aluminum Casting on Tensile Strength and Microstructure

Logic: Jurnal Rancang Bangun dan Teknologi · Vol. 20 No. 3 (2020) · hlm. 145–151

DOI
10.31940/logic.v20i3.2151
ISSN
2580-5649, 1412-114X
Terbit
2020-11-30
Penerbit
Pusat Penelitian dan Pengabdian kepada Masyarakat (P3M) Politeknik Negeri Bali
Bahasa
eng

Abstrak

The problems faced are aluminium (Al) waste from industries that damage the environment and scarcity of Al raw materials that need to be recycled from used Al. The research objective was to determine the effect of adding magnesium (Mg) to used Al casting on the tensile strength and microstructure and to determine the comparison of the tensile strength of the Al material used by the piston to the brake lining and drum of motorcycles. The research method includes casting Al used pistons, brake lining and drum, testing the tensile strength and microstructure due to the addition of 0.1; 0.2; 0.5 and 1.0% by weight Mg to the tensile strength and microstructure. The results showed that the addition of Mg 0.5% by weight could increase the tensile strength of 92.96% from 71 MPa to 137 MPa for brake lining as the optimum value which further decreased the tensile strength by 19.7% at the addition of 1% Mg to 110 MPa. Drum material also experienced an increase in tensile strength of 33.71% from 89 MPa to 119 MPa as the optimum value where the tensile strength decreased by 5.88% for the addition of 1% Mg to 112 MPa. The two values of the tensile strength of the brake lining and drum components are lower than those of the piston component valued at 147 MPa, and with the addition of Mg, Mg2Si is formed which can reduce the porosity of the microstructure, thereby increasing its strength.

Jaringan kolaborasi para penulis

40 penulis · 139 tautan kepenulisan bersama · 74 lintas organisasi · menampilkan 40 yang paling banyak terhubung

Arahkan kursor atau ketuk sebuah nama untuk menyorot rekan penulisnya. Klik dua kali untuk membuka halaman penulis.

  • Politeknik Negeri Malang
  • University of Sarjanawiyata Tamansiswa
  • Universitas Islam Malang
  • Universitas Sains dan Teknologi Jayapura
  • Politeknik Pertanian Negeri Pangkajene Kepulauan
  • Lambung Mangkurat University
  • Keio University
  • Organisasi lain
  • Afiliasi tidak diketahui
  • Organisasi berbeda
  • Organisasi sama
  • Afiliasi tidak diketahui
  • Garis lebih tebal = lebih banyak artikel bersama · lingkaran lebih besar = lebih banyak artikel
Tampilkan sebagai tabel
Rekan penulisOrganisasiArtikel bersama
Nila AliaPoliteknik Negeri Malang3
Andri SetiawanPoliteknik Negeri Malang2
Sudarmadji .Afiliasi tidak diketahui2
Bambang IrawanLambung Mangkurat University2
Anggit MurdaniPoliteknik Negeri Malang2
Andhika Erlangga Setiawan PutraPoliteknik Negeri Malang2
Sza Sya Monica ValeriaPoliteknik Negeri Malang2
Muhammad RiyadiPoliteknik Pertanian Negeri Pangkajene Kepulauan1
Irawan IlhamPoliteknik Pertanian Negeri Pangkajene Kepulauan1
Eko Sulkhany YuliantoUniversity of Sarjanawiyata Tamansiswa1
Tito Aji MilleniawanUniversity of Sarjanawiyata Tamansiswa1
Mohammad Ahyar Syafwan LysanderUniversity of Sarjanawiyata Tamansiswa1
Shahnur Al-HafriUniversity of Sarjanawiyata Tamansiswa1
Didik SubiyantoUniversity of Sarjanawiyata Tamansiswa1
Tri Aji PurnomoUniversity of Sarjanawiyata Tamansiswa1
Rachmat SubagyoLambung Mangkurat University1
Suyatno SuyatnoUniversitas Sains dan Teknologi Jayapura1
Masaki YamaguchiKeio University1
Selcuk SarikocAfiliasi tidak diketahui1
Hendry Y. NanlohyUniversitas Sains dan Teknologi Jayapura1
Helen RiupassaUniversitas Sains dan Teknologi Jayapura1
Andi SanataUniversitas Jember1
Trismawati TrismawatiUniversitas Panca Marga1
Satworo AdiwidodoPoliteknik Negeri Malang1
Takuya TomidokoroKeio University1
Ena MarlinaUniversitas Islam Malang1
Mitsuhisa IchiyanagiSophia University1
Willyanto AnggonoPetra Christian University1
Cepi YazirinUniversitas Islam Malang1
Haidar HaniefUniversitas Islam Malang1
Arya Radya Guntur PamungkasUniversitas Islam Malang1
Nanang QosimPoliteknik Negeri Malang1
Am. MufarrihPoliteknik Negeri Malang1
Zakki Fuadi EmzainPoliteknik Negeri Malang1
Muslimin MusliminJakarta State Polytechnic1

Afiliasi berasal dari OpenAlex; metadata OAI-PMH jurnal tidak memuatnya. Penulis tanpa ID OpenAlex dicocokkan berdasarkan nama, sehingga dua orang bisa tergabung atau satu orang bisa terpisah.

Sumber metadata: OAI-PMH (metadata jurnal) https://ojs.pnb.ac.id/index.php/LOGIC/oai, pertama di-harvest 19 Nov 2026, terakhir terlihat 19 Nov 2026.
Metadata asli (oai_dc)
<oai_dc:dc xmlns="http://www.openarchives.org/OAI/2.0/" xmlns:dc="http://purl.org/dc/elements/1.1/" xmlns:oai_dc="http://www.openarchives.org/OAI/2.0/oai_dc/" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:schemaLocation="http://www.openarchives.org/OAI/2.0/oai_dc/  http://www.openarchives.org/OAI/2.0/oai_dc.xsd">
	<dc:title xml:lang="en-US">The Effect of Mg Adding in Recycled Aluminum Casting on Tensile Strength and Microstructure</dc:title>
	<dc:creator>Hadi, Syamsul</dc:creator>
	<dc:creator>Aziz, Ahmad Hailala Nur</dc:creator>
	<dc:creator>Nugroho, Pipit Wahyu</dc:creator>
	<dc:creator>Rizza, Muhammad Akhlis</dc:creator>
	<dc:creator>Wicaksono, Hangga</dc:creator>
	<dc:description xml:lang="en-US">The problems faced are aluminium (Al) waste from industries that damage the environment and scarcity of Al raw materials that need to be recycled from used Al. The research objective was to determine the effect of adding magnesium (Mg) to used Al casting on the tensile strength and microstructure and to determine the comparison of the tensile strength of the Al material used by the piston to the brake lining and drum of motorcycles. The research method includes casting Al used pistons, brake lining and drum, testing the tensile strength and microstructure due to the addition of 0.1; 0.2; 0.5 and 1.0% by weight Mg to the tensile strength and microstructure. The results showed that the addition of Mg 0.5% by weight could increase the tensile strength of 92.96% from 71 MPa to 137 MPa for brake lining as the optimum value which further decreased the tensile strength by 19.7% at the addition of 1% Mg to 110 MPa. Drum material also experienced an increase in tensile strength of 33.71% from 89 MPa to 119 MPa as the optimum value where the tensile strength decreased by 5.88% for the addition of 1% Mg to 112 MPa. The two values of the tensile strength of the brake lining and drum components are lower than those of the piston component valued at 147 MPa, and with the addition of Mg, Mg2Si is formed which can reduce the porosity of the microstructure, thereby increasing its strength.</dc:description>
	<dc:publisher xml:lang="en-US">Pusat Penelitian dan Pengabdian kepada Masyarakat (P3M) Politeknik Negeri Bali</dc:publisher>
	<dc:date>2020-11-30</dc:date>
	<dc:type>info:eu-repo/semantics/article</dc:type>
	<dc:type>info:eu-repo/semantics/publishedVersion</dc:type>
	<dc:type xml:lang="en-US">Peer-reviewed Article</dc:type>
	<dc:format>application/pdf</dc:format>
	<dc:identifier>https://ojs.pnb.ac.id/index.php/LOGIC/article/view/2151</dc:identifier>
	<dc:identifier>10.31940/logic.v20i3.2151</dc:identifier>
	<dc:source xml:lang="en-US">Logic : Jurnal Rancang Bangun dan Teknologi; Vol 20 No 3 (2020): November; 145-151</dc:source>
	<dc:source>2580-5649</dc:source>
	<dc:source>1412-114X</dc:source>
	<dc:source>10.31940/logic.v20i3</dc:source>
	<dc:language>eng</dc:language>
	<dc:relation>https://ojs.pnb.ac.id/index.php/LOGIC/article/view/2151/1608</dc:relation>
	<dc:rights xml:lang="en-US">Copyright (c) 2020 Logic : Jurnal Rancang Bangun dan Teknologi</dc:rights>
</oai_dc:dc>