Melola Discovery

← Melola Discovery

Jurnal SINTA 3

Automatic Mirror Folding Design Arduino-Based

Logic: Jurnal Rancang Bangun dan Teknologi · Vol. 21 No. 2 (2021) · hlm. 93–96

DOI
10.31940/logic.v21i2.2503
ISSN
2580-5649, 1412-114X
Terbit
2021-07-30
Penerbit
Pusat Penelitian dan Pengabdian kepada Masyarakat (P3M) Politeknik Negeri Bali
Bahasa
eng

Abstrak

Abstract. The rear-view mirror is one of the main devices found in cars. A mirror is a mirror used to see the traffic of a vehicle behind when it is about to veer, stop or change lanes. The purpose of this study was to design a pre-crash performance test of the rearview mirror. That is a system that will automatically perform mirror folding automatically based on the distance of the object in front of it. The system will reduce the risk of broken or scratched due to driver negligence. The research method at a time when the barrier is 30cm (±20cm) away from the front or back of the rearview mirror will read that distance which will then transmit to the Arduino. Arduino will process the data and send data for the speed reduction process by warning that there is an object in front or behind the rearview mirror and when the distance is <30cm from the barrier object, then the Arduino will order to fold the rearview mirror automatically, by activating the servo motor to fold the rear and rearview mirrors. The result of this study was to find out the performance of the GP2Y0A21 distance sensor reading and the performance of the rearview mirror pre-crash system. In this study, the bound variable was the distance measurement of the sensor's reading. The free variable used is the sensor reading metering distance displayed on the LCD (Liquid Crystal Display).

Jaringan kolaborasi para penulis

35 penulis · 60 tautan kepenulisan bersama · 12 lintas organisasi

Arahkan kursor atau ketuk sebuah nama untuk menyorot rekan penulisnya. Klik dua kali untuk membuka halaman penulis.

  • State University of Semarang
  • Politeknik Negeri Malang
  • Yogyakarta State University
  • Jakarta State Polytechnic
  • Indonesia University of Education
  • Afiliasi tidak diketahui
  • Organisasi berbeda
  • Organisasi sama
  • Afiliasi tidak diketahui
  • Garis lebih tebal = lebih banyak artikel bersama · lingkaran lebih besar = lebih banyak artikel
Tampilkan sebagai tabel
Rekan penulisOrganisasiArtikel bersama
Heni Agus PurwantiState University of Semarang1
Nina OktarinaState University of Semarang1
Pujianto PujiantoYogyakarta State University1
Awalya Ma’rifatul JannahAfiliasi tidak diketahui1
Sofrotul NikhmahState University of Semarang1
Suci AstutiState University of Semarang1
Taufan PrihadiniState University of Semarang1
Achmad RifaiState University of Semarang1
Achmad Riqi DzulkurnainState University of Semarang1
Desi LarasatiState University of Semarang1
Prasti PraditasariState University of Semarang1
Ishlah AvianState University of Semarang1
Ayuni Riska PutriState University of Semarang1
Kuat Waluyo JatiState University of Semarang1
Annis Nurfitriana NihayahState University of Semarang1
Ayuntavia AyuntaviaAfiliasi tidak diketahui1
Rima MurtiningsihState University of Semarang1
Heru PrasetyoPoliteknik Negeri Malang1
Kris WitonoPoliteknik Negeri Malang1
Pondi UdiantoPoliteknik Negeri Malang1
Muhammad Arif Nur HudaPoliteknik Negeri Malang1
Pribadi Mumpuni AdhiJakarta State Polytechnic1
Mokhammad KhatamiPoliteknik Negeri Malang1
Agus SujatmikoPoliteknik Negeri Malang1
Agus SetiawanIndonesia University of Education1
SuryantoAfiliasi tidak diketahui1
Eko YudiyantoPoliteknik Negeri Malang1
Khambali KhambaliPoliteknik Negeri Malang1
Falih AlauddinPoliteknik Negeri Malang1
R.N. Akhsanu TakwimPoliteknik Negeri Malang1
Zahratul JannahPoliteknik Negeri Malang1

Afiliasi berasal dari OpenAlex; metadata OAI-PMH jurnal tidak memuatnya. Penulis tanpa ID OpenAlex dicocokkan berdasarkan nama, sehingga dua orang bisa tergabung atau satu orang bisa terpisah.

Sumber metadata: OAI-PMH (metadata jurnal) https://ojs.pnb.ac.id/index.php/LOGIC/oai, pertama di-harvest 19 Nov 2026, terakhir terlihat 19 Nov 2026.
Metadata asli (oai_dc)
<oai_dc:dc xmlns="http://www.openarchives.org/OAI/2.0/" xmlns:dc="http://purl.org/dc/elements/1.1/" xmlns:oai_dc="http://www.openarchives.org/OAI/2.0/oai_dc/" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:schemaLocation="http://www.openarchives.org/OAI/2.0/oai_dc/  http://www.openarchives.org/OAI/2.0/oai_dc.xsd">
	<dc:title xml:lang="en-US">Automatic Mirror Folding Design  Arduino-Based</dc:title>
	<dc:creator>Martawati, Mira Esculenta</dc:creator>
	<dc:creator>Susilo, Sugeng Hadi</dc:creator>
	<dc:creator>A, Asrori</dc:creator>
	<dc:creator>W, Lulut</dc:creator>
	<dc:description xml:lang="en-US">Abstract. The rear-view mirror is one of the main devices found in cars. A mirror is a mirror used to see the traffic of a vehicle behind when it is about to veer, stop or change lanes. The purpose of this study was to design a pre-crash performance test of the rearview mirror. That is a system that will automatically perform mirror folding automatically based on the distance of the object in front of it. The system will reduce the risk of broken or scratched due to driver negligence. The research method at a time when the barrier is 30cm (±20cm) away from the front or back of the rearview mirror will read that distance which will then transmit to the Arduino. Arduino will process the data and send data for the speed reduction process by warning that there is an object in front or behind the rearview mirror and when the distance is &amp;lt;30cm from the barrier object, then the Arduino will order to fold the rearview mirror automatically, by activating the servo motor to fold the rear and rearview mirrors. The result of this study was to find out the performance of the GP2Y0A21 distance sensor reading and the performance of the rearview mirror pre-crash system. In this study, the bound variable was the distance measurement of the sensor's reading. The free variable used is the sensor reading metering distance displayed on the LCD (Liquid Crystal Display).</dc:description>
	<dc:publisher xml:lang="en-US">Pusat Penelitian dan Pengabdian kepada Masyarakat (P3M) Politeknik Negeri Bali</dc:publisher>
	<dc:date>2021-07-30</dc:date>
	<dc:type>info:eu-repo/semantics/article</dc:type>
	<dc:type>info:eu-repo/semantics/publishedVersion</dc:type>
	<dc:type xml:lang="en-US">Peer-reviewed Article</dc:type>
	<dc:type xml:lang="en-US">text</dc:type>
	<dc:format>application/pdf</dc:format>
	<dc:identifier>https://ojs.pnb.ac.id/index.php/LOGIC/article/view/2503</dc:identifier>
	<dc:identifier>10.31940/logic.v21i2.2503</dc:identifier>
	<dc:source xml:lang="en-US">Logic : Jurnal Rancang Bangun dan Teknologi; Vol 21 No 2 (2021): July; 93-96</dc:source>
	<dc:source>2580-5649</dc:source>
	<dc:source>1412-114X</dc:source>
	<dc:source>10.31940/logic.v21i2</dc:source>
	<dc:language>eng</dc:language>
	<dc:relation>https://ojs.pnb.ac.id/index.php/LOGIC/article/view/2503/1820</dc:relation>
	<dc:rights xml:lang="en-US">Copyright (c) 2021 Logic : Jurnal Rancang Bangun dan Teknologi</dc:rights>
</oai_dc:dc>