Melola Discovery

← Melola Discovery

Jurnal SINTA 3

Effectiveness of Using Hollow as Column Formwork Amplifier Compared with Wood Beam

Logic: Jurnal Rancang Bangun dan Teknologi · Vol. 20 No. 2 (2020) · hlm. 80–84

DOI
10.31940/logic.v20i2.1272
ISSN
2580-5649, 1412-114X
Terbit
2020-07-30
Penerbit
Pusat Penelitian dan Pengabdian kepada Masyarakat (P3M) Politeknik Negeri Bali
Bahasa
eng

Abstrak

In terms of cost utilization, formwork is the largest cost component in concrete work on a building project. The cost for formwork is about 40-60% [6] of the cost of concrete work or about 10% of the total cost of building construction. With two methods of formwork i.e. conventional and half system formwork, the authors want to know the comparison of which formwork method is best in the aspect of cost savings, and the execution time for the formwork of columns on the Standard Villa project. From 2 (two) methods proposed then it is chosen the second method; that is formwork column with method of half system as best alternative. The savings can be done from the first method to the second method as much as 26.17%, while in terms of savings time that can be done with method 2 is equal to 5% of method 1

Jaringan kolaborasi para penulis

34 penulis · 84 tautan kepenulisan bersama · 3 lintas organisasi

Arahkan kursor atau ketuk sebuah nama untuk menyorot rekan penulisnya. Klik dua kali untuk membuka halaman penulis.

  • Politeknik Negeri Bali
  • The University of Queensland
  • Afiliasi tidak diketahui
  • Organisasi berbeda
  • Organisasi sama
  • Afiliasi tidak diketahui
  • Garis lebih tebal = lebih banyak artikel bersama · lingkaran lebih besar = lebih banyak artikel
Tampilkan sebagai tabel
Rekan penulisOrganisasiArtikel bersama
I Gede Sastra WibawaPoliteknik Negeri Bali8
I Gede Made KarmaPoliteknik Negeri Bali5
I Nengah Darma SusilaPoliteknik Negeri Bali3
I Ketut DarmaPoliteknik Negeri Bali3
I Made SudiarsaPoliteknik Negeri Bali2
Ida Bagus WirahajiPoliteknik Negeri Bali2
I Ketut DarmaPoliteknik Negeri Bali2
I Nyoman SutapaPoliteknik Negeri Bali2
I Wayan SuasiraAfiliasi tidak diketahui2
Kadek Adi SuryawanPoliteknik Negeri Bali2
I Made Tapa YasaPoliteknik Negeri Bali2
I Wayan SuastawaPoliteknik Negeri Bali1
I Nyoman ArdikaPoliteknik Negeri Bali1
I Putu Agus KrisnadinataPoliteknik Negeri Bali1
I Nyoman SutarnaPoliteknik Negeri Bali1
I Wayan Darya SupartaPoliteknik Negeri Bali1
I Nyoman RamiaPoliteknik Negeri Bali1
Denin Lintang TuhujatiPoliteknik Negeri Bali1
M YusufPoliteknik Negeri Bali1
I Made Anom SantianaAfiliasi tidak diketahui1
I Putu Rian Surya WigunaAfiliasi tidak diketahui1
I Komang SudiartaPoliteknik Negeri Bali1
I Nyoman SuardikaPoliteknik Negeri Bali1
I Made Suardana KaderPoliteknik Negeri Bali1
Made SudiarsaPoliteknik Negeri Bali1
Made Anom SantianaAfiliasi tidak diketahui1
Gede Sastra WibawaAfiliasi tidak diketahui1
I Made Suardana KaderAfiliasi tidak diketahui1
Ni Wayan SadiyaniPoliteknik Negeri Bali1
E IreneThe University of Queensland1

Afiliasi berasal dari OpenAlex; metadata OAI-PMH jurnal tidak memuatnya. Penulis tanpa ID OpenAlex dicocokkan berdasarkan nama, sehingga dua orang bisa tergabung atau satu orang bisa terpisah.

Sumber metadata: OAI-PMH (metadata jurnal) https://ojs.pnb.ac.id/index.php/LOGIC/oai, pertama di-harvest 19 Nov 2026, terakhir terlihat 19 Nov 2026.
Metadata asli (oai_dc)
<oai_dc:dc xmlns="http://www.openarchives.org/OAI/2.0/" xmlns:dc="http://purl.org/dc/elements/1.1/" xmlns:oai_dc="http://www.openarchives.org/OAI/2.0/oai_dc/" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:schemaLocation="http://www.openarchives.org/OAI/2.0/oai_dc/  http://www.openarchives.org/OAI/2.0/oai_dc.xsd">
	<dc:title xml:lang="en-US">Effectiveness of Using Hollow as Column Formwork Amplifier Compared with Wood Beam</dc:title>
	<dc:creator>Suasira, I Wayan</dc:creator>
	<dc:creator>Tapayasa, I Made</dc:creator>
	<dc:creator>Sutapa, I Ketut</dc:creator>
	<dc:creator>Santiana, I Made Anom</dc:creator>
	<dc:description xml:lang="en-US">In terms of cost utilization, formwork is the largest cost component in concrete work on a building project. The cost for formwork is about 40-60% [6] of the cost of concrete work or about 10% of the total cost of building construction. With two methods of formwork i.e. conventional and half system formwork, the authors want to know the comparison of which formwork method is best in the aspect of cost savings, and the execution time for the formwork of columns on the Standard Villa project. From 2 (two) methods proposed then it is chosen the second method; that is formwork column with method of half system as best alternative. The savings can be done from the first method to the second method as much as 26.17%, while in terms of savings time that can be done with &amp;nbsp;method 2 &amp;nbsp;is equal to 5% of method 1</dc:description>
	<dc:publisher xml:lang="en-US">Pusat Penelitian dan Pengabdian kepada Masyarakat (P3M) Politeknik Negeri Bali</dc:publisher>
	<dc:date>2020-07-30</dc:date>
	<dc:type>info:eu-repo/semantics/article</dc:type>
	<dc:type>info:eu-repo/semantics/publishedVersion</dc:type>
	<dc:type xml:lang="en-US">Peer-reviewed Article</dc:type>
	<dc:format>application/pdf</dc:format>
	<dc:identifier>https://ojs.pnb.ac.id/index.php/LOGIC/article/view/1272</dc:identifier>
	<dc:identifier>10.31940/logic.v20i2.1272</dc:identifier>
	<dc:source xml:lang="en-US">Logic : Jurnal Rancang Bangun dan Teknologi; Vol 20 No 2 (2020): July; 80-84</dc:source>
	<dc:source>2580-5649</dc:source>
	<dc:source>1412-114X</dc:source>
	<dc:source>10.31940/logic.v20i2</dc:source>
	<dc:language>eng</dc:language>
	<dc:relation>https://ojs.pnb.ac.id/index.php/LOGIC/article/view/1272/1439</dc:relation>
	<dc:rights xml:lang="en-US">Copyright (c) 2020 Logic : Jurnal Rancang Bangun dan Teknologi</dc:rights>
</oai_dc:dc>