Melola Discovery

← Melola Discovery

Jurnal SINTA 3

Preheat Temperature Analysis of Cutting Knife Coating Violence in the Hard Facing Process of Aisi A35 Carbon Steel

Logic: Jurnal Rancang Bangun dan Teknologi · Vol. 20 No. 3 (2020) · hlm. 160–166

DOI
10.31940/logic.v20i3.2152
ISSN
2580-5649, 1412-114X
Terbit
2020-11-30
Penerbit
Pusat Penelitian dan Pengabdian kepada Masyarakat (P3M) Politeknik Negeri Bali
Bahasa
eng

Abstrak

The hard facing process is the welding process of SMAW by using a hard facing DIN 888 electrode as a hard facing to replace conventional cutting tool material. The purpose of this analysis is to determine the effect of preheating temperature on the welding of hard coatings on AISI A35 low carbon steel. The results of this study are expected to obtain optimum hardness on coated steel, from variations in the temperature of the preheating. there will be a change in the hardness of the welding deposit, the deposit will be used as cutting tools. The results of this study can be used as guidelines for making cutting tools.

Jaringan kolaborasi para penulis

17 penulis · 40 tautan kepenulisan bersama

Arahkan kursor atau ketuk sebuah nama untuk menyorot rekan penulisnya. Klik dua kali untuk membuka halaman penulis.

  • Politeknik Negeri Malang
  • Afiliasi tidak diketahui
  • Organisasi berbeda
  • Organisasi sama
  • Afiliasi tidak diketahui
  • Garis lebih tebal = lebih banyak artikel bersama · lingkaran lebih besar = lebih banyak artikel
Tampilkan sebagai tabel
Rekan penulisOrganisasiArtikel bersama
Bayu PranotoPoliteknik Negeri Malang3
PurwokoAfiliasi tidak diketahui2
Anggit MurdaniPoliteknik Negeri Malang2
Nurlia Pramita SariPoliteknik Negeri Malang2
Naufal Reza PutraAfiliasi tidak diketahui1
Muhammad FakhruddinPoliteknik Negeri Malang1
Nicky Suwandhy Widhi SupriyantoPoliteknik Negeri Malang1
Zakiyah AmaliaPoliteknik Negeri Malang1
Talifatim MachfurohPoliteknik Negeri Malang1
Siti Duratun Nasiqiati RosadyPoliteknik Negeri Malang1
SubagiyoPoliteknik Negeri Malang1
Sugeng Hadi SusiloPoliteknik Negeri Malang1
Zahratul JannahPoliteknik Negeri Malang1

Afiliasi berasal dari OpenAlex; metadata OAI-PMH jurnal tidak memuatnya. Penulis tanpa ID OpenAlex dicocokkan berdasarkan nama, sehingga dua orang bisa tergabung atau satu orang bisa terpisah.

Sumber metadata: OAI-PMH (metadata jurnal) https://ojs.pnb.ac.id/index.php/LOGIC/oai, pertama di-harvest 19 Nov 2026, terakhir terlihat 19 Nov 2026.
Metadata asli (oai_dc)
<oai_dc:dc xmlns="http://www.openarchives.org/OAI/2.0/" xmlns:dc="http://purl.org/dc/elements/1.1/" xmlns:oai_dc="http://www.openarchives.org/OAI/2.0/oai_dc/" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:schemaLocation="http://www.openarchives.org/OAI/2.0/oai_dc/  http://www.openarchives.org/OAI/2.0/oai_dc.xsd">
	<dc:title xml:lang="en-US">Preheat Temperature Analysis of Cutting Knife Coating Violence in the Hard Facing Process of Aisi A35 Carbon Steel</dc:title>
	<dc:creator>Hardjito, Agus</dc:creator>
	<dc:creator>Mashudi, Imam</dc:creator>
	<dc:creator>Listiono, Listiono</dc:creator>
	<dc:creator>Takwim, R.N. Akhsanu</dc:creator>
	<dc:description xml:lang="en-US">The hard facing process is the welding process of SMAW by using a hard facing DIN 888 electrode as a hard facing to replace conventional cutting tool material. The purpose of this analysis is to determine the effect of preheating temperature on the welding of hard coatings on AISI A35 low carbon steel. The results of this study are expected to obtain optimum hardness on coated steel, from variations in the temperature of the preheating. there will be a change in the hardness of the welding deposit, the deposit will be used as cutting tools. The results of this study can be used as guidelines for making cutting tools.</dc:description>
	<dc:publisher xml:lang="en-US">Pusat Penelitian dan Pengabdian kepada Masyarakat (P3M) Politeknik Negeri Bali</dc:publisher>
	<dc:date>2020-11-30</dc:date>
	<dc:type>info:eu-repo/semantics/article</dc:type>
	<dc:type>info:eu-repo/semantics/publishedVersion</dc:type>
	<dc:type xml:lang="en-US">Peer-reviewed Article</dc:type>
	<dc:format>application/pdf</dc:format>
	<dc:identifier>https://ojs.pnb.ac.id/index.php/LOGIC/article/view/2152</dc:identifier>
	<dc:identifier>10.31940/logic.v20i3.2152</dc:identifier>
	<dc:source xml:lang="en-US">Logic : Jurnal Rancang Bangun dan Teknologi; Vol 20 No 3 (2020): November; 160-166</dc:source>
	<dc:source>2580-5649</dc:source>
	<dc:source>1412-114X</dc:source>
	<dc:source>10.31940/logic.v20i3</dc:source>
	<dc:language>eng</dc:language>
	<dc:relation>https://ojs.pnb.ac.id/index.php/LOGIC/article/view/2152/1625</dc:relation>
	<dc:rights xml:lang="en-US">Copyright (c) 2020 Logic : Jurnal Rancang Bangun dan Teknologi</dc:rights>
</oai_dc:dc>