Melola Discovery

← Melola Discovery

Akses terbuka Jurnal SINTA 1

Penerapan Produksi Bersih untuk Meningkatkan Efisiensi Proses Pelapisan Logam

Jurnal Pengelolaan Sumberdaya Alam dan Lingkungan (Journal of Natural Resources and Environmental Management) · Vol. 9 No. 3 (2019) · hlm. 700–709

DOI
10.29244/jpsl.9.3.700-709
ISSN
2086-4639, 2460-5824
Terbit
2019-10-11
Penerbit
Bogor Institute of Agriculture
Bahasa
id
Lisensi
creativecommons.org/licenses/by/4.0/

Abstrak

Metal coating wastes generally bring about environmental health problems resulting from liquid wastes that contain heavy metals. The waste processing carried out thus far does not solve the problems because it just move wastes to other media. Cleaner production comes to be an alternative in minimizing liquid wastes, for water consumption, and for raw material. The present research was intended to identify wastewater resulting from the production stage, get cleaner production opportunities that can be applied, and give priority to clean production opportunities. The research stages began with a quick scan to identify the sources of wastes in production process and to determine an alternative of cleaner production chance, and then an economic computation was done, including B/C ratio and payback period. The determination of the priority of cleaner production technique given to a company was conducted by using exponential comparison method. The results showed that liquid wastes were originated from the process of fat removing, metal coating and process of cleaning up the remaining oxides. Liquid waste or loss in the form of contaminated fat solvents, the quite great loss of water due to evaporation and leakage. Cleaner production opportunities that can be applied by modifying/adding tools so as to prevent alkali solutionfrom being contaminated, reducing evaporation and reducing leakages by good housekepping. Three opportunities for cleaner production obtained to have B/C Ratio of more than 1 is can be implemented. Based on the exponential comparison method, the main priority of cleaner production is found, that is pipe changes in the residual oxide cleaning process to avoid leakage, technically and operationally the easiest to implement and followed successively with modifiying/adding tools to process of fat removing and metal coating.

Kata kunci

Jaringan kolaborasi para penulis

37 penulis · 91 tautan kepenulisan bersama · 3 lintas organisasi

Arahkan kursor atau ketuk sebuah nama untuk menyorot rekan penulisnya. Klik dua kali untuk membuka halaman penulis.

  • IPB University
  • Universitas Islam Negeri Ar-Raniry
  • Afiliasi tidak diketahui
  • Organisasi berbeda
  • Organisasi sama
  • Afiliasi tidak diketahui
  • Garis lebih tebal = lebih banyak artikel bersama · lingkaran lebih besar = lebih banyak artikel
Tampilkan sebagai tabel
Rekan penulisOrganisasiArtikel bersama
Mohamad YaniIPB University2
Bambang PramudyaIPB University2
Fakultas Teknologi Pertanian, Institut Pertanian Bogor, Kampus IPB Darmaga, Bogor 16680 Departemen Teknologi Industri PertanianAfiliasi tidak diketahui2
Moh. YaniIPB University2
Marimin MariminIPB University1
Nurul UmmiIPB University1
Muhammad RomliIPB University1
Christy Nur CahyaniIPB University1
Cecep KusmanaIPB University1
Zainal AbidinUniversitas Islam Negeri Ar-Raniry1
Achmad Gus FahmiIPB University1
Irzaman IrzamanIPB University1
Casnan CasnanIPB University1
Eti RohaetiIPB University1
Hartrisari HadjomidjojoIPB University1
Pipih SuptijahIPB University1
Anggun RatnawulanAfiliasi tidak diketahui1
Hariyadi HariyadiIPB University1
Danang HarimurtiIPB University1
Sekolah Pascasarjana Institut Pertanian Bogor, Kampus IPB Darmaga, Bogor 16680 Program Studi Pengelolaan Sumberdaya Alam dan LingkunganIPB University1
Sillak HasianyIPB University1
Fakultas Teknologi Pertanian, Institut Pertanian Bogor, Kampus IPB Darmaga, Bogor 16680 Departemen Teknik Industri PertanianAfiliasi tidak diketahui1
Sekolah Pascasarjana Institut Pertanian Bogor, Kampus IPB Darmaga, Bogor 16680 Program Studi Pengelolaan Sumber Daya Alam dan LingkunganIPB University1
Temmy WikaningrumIPB University1
Fakultas Teknologi Pertanian, Institut Pertanian Bogor, Kampus IPB Darmaga, Bogor 16680 Departemen Teknik Mesin dan BiosistemAfiliasi tidak diketahui1
Heriansyah PutraIPB University1
Reza Eka PutraIPB University1
Medy RamdhaniAfiliasi tidak diketahui1
Sekolah Pascasarjana, Institut Pertanian Bogor, Kampus IPB Baranangsiang, Bogor 16680 Program Studi Pengelolaan Sumberdaya Alam dan LingkunganIPB University1
Aris Dwi CahyantoIPB University1
Fakultas Teknologi Pertanian, Institut Pertanian Bogor, Kampus IPB Darmaga, Bogor 16680 Teknik Mesin dan BiosistemAfiliasi tidak diketahui1
Antarif Kusuma BrataIPB University1
Sekolah Pascasarjana Institut Pertanian Bogor Program Studi Pengelolaan Sumberdaya Alam dan LingkunganIPB University1
Fakultas Teknologi Petanian, Institut Pertanian Bogor, Kampus IPB Darmaga, Bogor 16680 Departemen Teknologi Industri PertanianAfiliasi tidak diketahui1

Afiliasi berasal dari OpenAlex; metadata OAI-PMH jurnal tidak memuatnya. Penulis tanpa ID OpenAlex dicocokkan berdasarkan nama, sehingga dua orang bisa tergabung atau satu orang bisa terpisah.

Sumber metadata: OpenAlex API (jurnal SINTA, ADR 0048) https://openalex.org/S4210235798, pertama di-harvest 19 Nov 2026, terakhir terlihat 19 Nov 2026.
Metadata asli (oai_dc)
<oai_dc:dc xmlns:dc="http://purl.org/dc/elements/1.1/" xmlns:oai_dc="http://www.openarchives.org/OAI/2.0/oai_dc/"><dc:title xml:lang="id">Penerapan Produksi Bersih untuk Meningkatkan Efisiensi Proses Pelapisan Logam</dc:title><dc:creator>Amelia Theresia Sirait</dc:creator><dc:creator>Erliza Noor</dc:creator><dc:creator>Andes Ismayana</dc:creator><dc:subject>cleaner production</dc:subject><dc:subject>metal coatings</dc:subject><dc:subject>liquid waste</dc:subject><dc:subject>heavy metal contamination</dc:subject><dc:subject>wastewater reduction</dc:subject><dc:subject>fat removal</dc:subject><dc:subject>evaporation losses</dc:subject><dc:subject>leakage prevention</dc:subject><dc:subject>B/C ratio</dc:subject><dc:subject>payback period</dc:subject><dc:subject>exponential comparison method</dc:subject><dc:subject>production efficiency</dc:subject><dc:description xml:lang="id">Metal coating wastes generally bring about environmental health problems resulting from liquid wastes that contain heavy metals. The waste processing carried out thus far does not solve the problems because it just move wastes to other media. Cleaner production comes to be an alternative in minimizing liquid wastes, for water consumption, and for raw material. The present research was intended to identify wastewater resulting from the production stage, get cleaner production opportunities that can be applied, and give priority to clean production opportunities. The research stages began with a quick scan to identify the sources of wastes in production process and to determine an alternative of cleaner production chance, and then an economic computation was done, including B/C ratio and payback period. The determination of the priority of cleaner production technique given to a company was conducted by using exponential comparison method. The results showed that liquid wastes were originated from the process of fat removing, metal coating and process of cleaning up the remaining oxides. Liquid waste or loss in the form of contaminated fat solvents, the quite great loss of water due to evaporation and leakage. Cleaner production opportunities that can be applied by modifying/adding tools so as to prevent alkali solutionfrom being contaminated, reducing evaporation and reducing leakages by good housekepping. Three opportunities for cleaner production obtained to have B/C Ratio of more than 1 is can be implemented. Based on the exponential comparison method, the main priority of cleaner production is found, that is pipe changes in the residual oxide cleaning process to avoid leakage, technically and operationally the easiest to implement and followed successively with modifiying/adding tools to process of fat removing and metal coating.</dc:description><dc:publisher>Bogor Institute of Agriculture</dc:publisher><dc:date>2019-10-11</dc:date><dc:type>info:eu-repo/semantics/article</dc:type><dc:identifier>https://doi.org/10.29244/jpsl.9.3.700-709</dc:identifier><dc:identifier>10.29244/jpsl.9.3.700-709</dc:identifier><dc:source>Jurnal Pengelolaan Sumberdaya Alam dan Lingkungan (Journal of Natural Resources and Environmental Management); Vol 9 No 3 (2019); 700-709</dc:source><dc:source>2086-4639</dc:source><dc:source>2460-5824</dc:source><dc:language>id</dc:language><dc:rights>https://creativecommons.org/licenses/by/4.0/</dc:rights></oai_dc:dc>