Melola Discovery

← Melola Discovery

Akses terbuka Jurnal SINTA 1

Optimizing the Use of Recycled Drinking Water Treatment Sludge in Paving Block Production

Jurnal Pengelolaan Sumberdaya Alam dan Lingkungan (Journal of Natural Resources and Environmental Management) · Vol. 15 No. 4 (2025) · hlm. 710–710

DOI
10.29244/jpsl.15.4.710
ISSN
2086-4639, 2460-5824
Terbit
2025-08-12
Penerbit
Bogor Institute of Agriculture
Bahasa
en
Lisensi
creativecommons.org/licenses/by/4.0/

Abstrak

Drinking Water Treatment Sludge (DWTS) recycling is a solution for handling waste sludge by making paving blocks. This paper analysis the optimization of the mechanical performance, durability, and cost production of the paving block incorporating recycled DWTS as a replacement for fine aggregate. Three paving block mixes were produced, and the replacement of sand aggregates by DWTS aggregate was mixed into different percentages by weight with variations in the water-tocementitious ratio (w/c). The mechanical performance and durability significantly decreased, falling well below the quality criteria, with the addition of DWTS increasing by over 40%. The obtained result indicated that DWTS could be used as an adequate replacement for sand aggregate that met the optimum level in the paving block containing 40% sludge with w/c 0.8 could achieve a 28-day compressive strength of 11.64 MPa, a density of 1,866.27 kg/m³, a water absorption of 12.61%, and a wear resistance of 0.077 mm/minute. It was the optimal replacement value that met the quality requirements for Class D (park). It has utilization of DWTS in paving block could help develop the appropriate technology and increase production cost efficiency to 7.73% equivalent 72,697.82 IDR/m3 paving block, thus significantly resulted in product meets technical reliability and low-cost.

Kata kunci

Jaringan kolaborasi para penulis

36 penulis · 155 tautan kepenulisan bersama · 93 lintas organisasi

Arahkan kursor atau ketuk sebuah nama untuk menyorot rekan penulisnya. Klik dua kali untuk membuka halaman penulis.

  • IPB University
  • Universitas Gadjah Mada
  • Bandung Institute of Technology
  • Ehime University
  • Universitas Airlangga
  • Universitas Halu Oleo
  • Afiliasi tidak diketahui
  • Organisasi berbeda
  • Organisasi sama
  • Afiliasi tidak diketahui
  • Garis lebih tebal = lebih banyak artikel bersama · lingkaran lebih besar = lebih banyak artikel
Tampilkan sebagai tabel
Rekan penulisOrganisasiArtikel bersama
Mohamad YaniIPB University2
ErizalIPB University2
Hideaki YasuharaEhime University2
Naoki KinoshitaEhime University2
Tri SudibyoIPB University2
Muhammad FauzanIPB University2
Christy Nur CahyaniIPB University1
Wahyu SrigutomoBandung Institute of Technology1
Nina Siti AminahBandung Institute of Technology1
Mitra DjamalBandung Institute of Technology1
Wahyudi WahyudiUniversitas Gadjah Mada1
Irzaman IrzamanIPB University1
Perdinan PerdinanIPB University1
Irwan MeilanoBandung Institute of Technology1
Retna ApsariUniversitas Airlangga1
Wiwit SuryantoUniversitas Gadjah Mada1
Imam SuyantoUniversitas Gadjah Mada1
Ari SetiawanUniversitas Gadjah Mada1
Herlan DarmawanUniversitas Gadjah Mada1
Maria EvitaBandung Institute of Technology1
Moh YasinUniversitas Airlangga1
Minson SimatupangUniversitas Halu Oleo1
Yunan Yakuta WangsawitanaIPB University1
Muhammad FauzanIPB University1
Erliza NoorIPB University1
Amelia Theresia SiraitAfiliasi tidak diketahui1
Medy RamdhaniAfiliasi tidak diketahui1
Moh. YaniIPB University1
Antarif Kusuma BrataIPB University1
Sekolah Pascasarjana Institut Pertanian Bogor Program Studi Pengelolaan Sumberdaya Alam dan LingkunganIPB University1
Fakultas Teknologi Petanian, Institut Pertanian Bogor, Kampus IPB Darmaga, Bogor 16680 Departemen Teknologi Industri PertanianAfiliasi tidak diketahui1
Zalfa Maulida IhsaniIPB University1
Fathur RamadhanIPB University1

Afiliasi berasal dari OpenAlex; metadata OAI-PMH jurnal tidak memuatnya. Penulis tanpa ID OpenAlex dicocokkan berdasarkan nama, sehingga dua orang bisa tergabung atau satu orang bisa terpisah.

Sumber metadata: OpenAlex API (jurnal SINTA, ADR 0048) https://openalex.org/S4210235798, pertama di-harvest 19 Nov 2026, terakhir terlihat 19 Nov 2026.
Metadata asli (oai_dc)
<oai_dc:dc xmlns:dc="http://purl.org/dc/elements/1.1/" xmlns:oai_dc="http://www.openarchives.org/OAI/2.0/oai_dc/"><dc:title xml:lang="en">Optimizing the Use of Recycled Drinking Water Treatment Sludge in Paving Block Production</dc:title><dc:creator>Reza Eka Putra</dc:creator><dc:creator>Andes Ismayana</dc:creator><dc:creator>Heriansyah Putra</dc:creator><dc:subject>drinking water treatment sludge</dc:subject><dc:subject>sludge recycling</dc:subject><dc:subject>paving blocks</dc:subject><dc:subject>fine aggregate replacement</dc:subject><dc:subject>compressive strength</dc:subject><dc:subject>water absorption</dc:subject><dc:subject>wear resistance</dc:subject><dc:subject>durability</dc:subject><dc:subject>production costs</dc:subject><dc:description xml:lang="en">Drinking Water Treatment Sludge (DWTS) recycling is a solution for handling waste sludge by making paving blocks. This paper analysis the optimization of the mechanical performance, durability, and cost production of the paving block incorporating recycled DWTS as a replacement for fine aggregate. Three paving block mixes were produced, and the replacement of sand aggregates by DWTS aggregate was mixed into different percentages by weight with variations in the water-tocementitious ratio (w/c). The mechanical performance and durability significantly decreased, falling well below the quality criteria, with the addition of DWTS increasing by over 40%. The obtained result indicated that DWTS could be used as an adequate replacement for sand aggregate that met the optimum level in the paving block containing 40% sludge with w/c 0.8 could achieve a 28-day compressive strength of 11.64 MPa, a density of 1,866.27 kg/m³, a water absorption of 12.61%, and a wear resistance of 0.077 mm/minute. It was the optimal replacement value that met the quality requirements for Class D (park). It has utilization of DWTS in paving block could help develop the appropriate technology and increase production cost efficiency to 7.73% equivalent 72,697.82 IDR/m3 paving block, thus significantly resulted in product meets technical reliability and low-cost.</dc:description><dc:publisher>Bogor Institute of Agriculture</dc:publisher><dc:date>2025-08-12</dc:date><dc:type>info:eu-repo/semantics/article</dc:type><dc:format>application/pdf</dc:format><dc:identifier>https://doi.org/10.29244/jpsl.15.4.710</dc:identifier><dc:identifier>10.29244/jpsl.15.4.710</dc:identifier><dc:source>Jurnal Pengelolaan Sumberdaya Alam dan Lingkungan (Journal of Natural Resources and Environmental Management); Vol 15 No 4 (2025); 710-710</dc:source><dc:source>2086-4639</dc:source><dc:source>2460-5824</dc:source><dc:language>en</dc:language><dc:relation>https://journal.ipb.ac.id/jpsl/article/download/47732/31323</dc:relation><dc:rights>https://creativecommons.org/licenses/by/4.0/</dc:rights></oai_dc:dc>