Melola Discovery

← Melola Discovery

Akses terbuka Jurnal SINTA 1

Analysis of MEP Work Waste Management Efforts in Building Construction Projects in Jakarta Greater Area

Jurnal Pengelolaan Sumberdaya Alam dan Lingkungan (Journal of Natural Resources and Environmental Management) · Vol. 14 No. 3 (2024) · hlm. 590–590

DOI
10.29244/jpsl.14.3.590
ISSN
2086-4639, 2460-5824
Terbit
2024-08-05
Penerbit
Bogor Institute of Agriculture
Bahasa
en
Lisensi
creativecommons.org/licenses/by/4.0/

Abstrak

Construction projects are among the sectors that are growing rapidly in Indonesia and have an impact on the environment from the resulting construction waste. The purpose of this study is to analyze the highest type and quantity of construction waste generated from Mechanical Electrical Plumbing (MEP) work from the difference in the amount of material from the BOQ with the amount attached to the as-built drawings, evaluate the economic value by calculating the ratio of the amount of waste generated to the amount of material at BOQ (waste level) × the scope of work percentage (waste cost), selling value of waste (the quantity of waste × the local selling price), and costs of disposal of construction waste based on the agreement of each project management. This study uses a descriptive quantitative method. The results showed that most of the construction waste generated was based on its type, consisting of copper-based cables, steel and plastic pipes, and polyurethane ducts. The highest quantity of construction waste came from the office project, which was 2 × 1.5 mm2 NYA cables (216,515 m). The highest waste level value came from office, condotel, and factory projects using several types of cables (> 94%). The highest waste cost value came fromthe condotel project is polyurethane duct (IDR 5,727,267,000.00). The metal waste produced is sold by contractors to collectors for recycling. Non-metal waste is disposed by paying a civil contractor. Construction waste management policies must be implemented to reduce the amount and impact of construction waste generated.

Kata kunci

Jaringan kolaborasi para penulis

36 penulis · 108 tautan kepenulisan bersama · 59 lintas organisasi

Arahkan kursor atau ketuk sebuah nama untuk menyorot rekan penulisnya. Klik dua kali untuk membuka halaman penulis.

  • IPB University
  • Bandung Institute of Technology
  • Universitas Airlangga
  • Ehime University
  • Universitas Halu Oleo
  • Universitas Gadjah Mada
  • Université Paris Sciences et Lettres
  • Organisasi lain
  • Organisasi berbeda
  • Organisasi sama
  • Afiliasi tidak diketahui
  • Garis lebih tebal = lebih banyak artikel bersama · lingkaran lebih besar = lebih banyak artikel
Tampilkan sebagai tabel
Rekan penulisOrganisasiArtikel bersama
Heriansyah PutraIPB University2
Ati Dwi NurhayatiIPB University1
Sonya Okta DeviroIPB University1
Minson SimatupangUniversitas Halu Oleo1
Yunan Yakuta WangsawitanaIPB University1
Muhammad FauzanIPB University1
Dodi NandikaIPB University1
Arinana ArinanaIPB University1
Dikhi FirmansyahBandung Institute of Technology1
Irmanida BatubaraIPB University1
Lucia Dhiantika WitasariUniversitas Gadjah Mada1
Yanti RachmayantiBandung Institute of Technology1
Reza Ro'isatul UmmaBandung Institute of Technology1
Decsa Medika HertantoUniversitas Airlangga1
I Ketut SudianaUniversitas Airlangga1
Djoko SantosoUniversitas Airlangga1
Anas Miftah FauziIPB University1
Atfal MurodifIPB University1
ErizalIPB University1
Iskandar Z. SiregarIPB University1
Regan Leonardus KaswantoIPB University1
Yoga FredisaIPB University1
Sri MulatsihIPB University1
Adi WidyantoUniversité Paris Sciences et Lettres1
Yudi ChadirinIPB University1
Nurul Asmarani Damayanti RahardjoIPB University1
Hideaki YasuharaEhime University1
Naoki KinoshitaEhime University1
Tri SudibyoIPB University1
D. AprialdiIPB University1
Stéphane LambertIPB University1
Orianne JenckCentre National de la Recherche Scientifique1
Meiske WidyartiIPB University1

Afiliasi berasal dari OpenAlex; metadata OAI-PMH jurnal tidak memuatnya. Penulis tanpa ID OpenAlex dicocokkan berdasarkan nama, sehingga dua orang bisa tergabung atau satu orang bisa terpisah.

Sumber metadata: OpenAlex API (jurnal SINTA, ADR 0048) https://openalex.org/S4210235798, pertama di-harvest 19 Nov 2026, terakhir terlihat 19 Nov 2026.
Metadata asli (oai_dc)
<oai_dc:dc xmlns:dc="http://purl.org/dc/elements/1.1/" xmlns:oai_dc="http://www.openarchives.org/OAI/2.0/oai_dc/"><dc:title xml:lang="en">Analysis of MEP Work Waste Management Efforts in Building Construction Projects in Jakarta Greater Area</dc:title><dc:creator>Elfira Augustin</dc:creator><dc:creator>Lina Karlinasari</dc:creator><dc:creator>Erizal</dc:creator><dc:subject>construction waste management</dc:subject><dc:subject>construction waste</dc:subject><dc:subject>building construction projects</dc:subject><dc:subject>quantity takeoff</dc:subject><dc:subject>as-built drawings</dc:subject><dc:subject>waste management costs</dc:subject><dc:subject>waste disposal costs</dc:subject><dc:subject>copper cables</dc:subject><dc:subject>metal waste recycling</dc:subject><dc:description xml:lang="en">Construction projects are among the sectors that are growing rapidly in Indonesia and have an impact on the environment from the resulting construction waste. The purpose of this study is to analyze the highest type and quantity of construction waste generated from Mechanical Electrical Plumbing (MEP) work from the difference in the amount of material from the BOQ with the amount attached to the as-built drawings, evaluate the economic value by calculating the ratio of the amount of waste generated to the amount of material at BOQ (waste level) × the scope of work percentage (waste cost), selling value of waste (the quantity of waste × the local selling price), and costs of disposal of construction waste based on the agreement of each project management. This study uses a descriptive quantitative method. The results showed that most of the construction waste generated was based on its type, consisting of copper-based cables, steel and plastic pipes, and polyurethane ducts. The highest quantity of construction waste came from the office project, which was 2 × 1.5 mm2 NYA cables (216,515 m). The highest waste level value came from office, condotel, and factory projects using several types of cables (&gt; 94%). The highest waste cost value came fromthe condotel project is polyurethane duct (IDR 5,727,267,000.00). The metal waste produced is sold by contractors to collectors for recycling. Non-metal waste is disposed by paying a civil contractor. Construction waste management policies must be implemented to reduce the amount and impact of construction waste generated.</dc:description><dc:publisher>Bogor Institute of Agriculture</dc:publisher><dc:date>2024-08-05</dc:date><dc:type>info:eu-repo/semantics/article</dc:type><dc:identifier>https://doi.org/10.29244/jpsl.14.3.590</dc:identifier><dc:identifier>10.29244/jpsl.14.3.590</dc:identifier><dc:source>Jurnal Pengelolaan Sumberdaya Alam dan Lingkungan (Journal of Natural Resources and Environmental Management); Vol 14 No 3 (2024); 590-590</dc:source><dc:source>2086-4639</dc:source><dc:source>2460-5824</dc:source><dc:language>en</dc:language><dc:rights>https://creativecommons.org/licenses/by/4.0/</dc:rights></oai_dc:dc>