Melola Discovery

← Melola Discovery

Akses terbuka Jurnal SINTA 1

Vertical Angulation Alteration Tolerance in the Periapical Radiograph of Maxillary Incisor (An in vitro Study)

Journal of Dentistry Indonesia · Vol. 21 No. 2 (2014)

DOI
10.14693/jdi.v21i2.178
ISSN
1693-9697, 2355-4800
Terbit
2014-12-31
Penerbit
University of Indonesia
Bahasa
en
Lisensi
creativecommons.org/licenses/by-sa/4.0/

Abstrak

The prevalence of vertical distortion in the periapical radiograph of the anterior maxillary teeth is quite significant and cingulum is commonly used as the reference of vertical distortion in anterior radiograph. Objective: To evaluate the limit of vertical angulation error that still can be tolerated. Methods: Periapical radiograph with vertical angle 0° was obtained from 30 maxillary incisors as reference, then the vertical angulation was changed into -10°, +10°, -15°, +15°, -20° and +20°. Long axis of the teeth was adjusted parallel to the film. Tooth length and cingulum width with vertical angulation alteration was measured and compared to the actual length. All of the measurement was tested using T test. Results: There were no significant differences between all the measurements of tooth length with the alteration in vertical angulation (p>0.05), whereas cingulum width had a significant difference at +15° and -10°, p<0.05. Conclusion: Tooth length in periapical radiograph of maxillary incisor with parallel position is still tolerable until 20º vertical angle errors. Cingulum width on radiograph with +15º vertical angle alteration is significantly narrowed and on radiograph with -10° vertical angle alteration is significantly widened.

Kata kunci

Jaringan kolaborasi para penulis

10 penulis · 25 tautan kepenulisan bersama · 13 lintas organisasi

Arahkan kursor atau ketuk sebuah nama untuk menyorot rekan penulisnya. Klik dua kali untuk membuka halaman penulis.

  • University of Indonesia
  • Unilever (United Kingdom)
  • Universitas Prof Dr Moestopo
  • Organisasi berbeda
  • Organisasi sama
  • Afiliasi tidak diketahui
  • Garis lebih tebal = lebih banyak artikel bersama · lingkaran lebih besar = lebih banyak artikel
Tampilkan sebagai tabel
Rekan penulisOrganisasiArtikel bersama
Erik IdrusUniversity of Indonesia1
Anton RahardjoUniversity of Indonesia1
Diah Ayu MaharaniUniversity of Indonesia1
Julie A. NicholsonUnilever (United Kingdom)1
Paul R. CunninghamUnilever (United Kingdom)1
Fred SchäferUnilever (United Kingdom)1
Diah IndriastutiUniversitas Prof Dr Moestopo1

Afiliasi berasal dari OpenAlex; metadata OAI-PMH jurnal tidak memuatnya. Penulis tanpa ID OpenAlex dicocokkan berdasarkan nama, sehingga dua orang bisa tergabung atau satu orang bisa terpisah.

Sumber metadata: OpenAlex API (jurnal SINTA, ADR 0048) https://openalex.org/S2736430281, pertama di-harvest 19 Nov 2026, terakhir terlihat 19 Nov 2026.
Metadata asli (oai_dc)
<oai_dc:dc xmlns:dc="http://purl.org/dc/elements/1.1/" xmlns:oai_dc="http://www.openarchives.org/OAI/2.0/oai_dc/"><dc:title xml:lang="en">Vertical Angulation Alteration Tolerance in the Periapical Radiograph of Maxillary Incisor (An in vitro Study)</dc:title><dc:creator>Maureen Antolis</dc:creator><dc:creator>Menik Priaminiarti</dc:creator><dc:creator>Bramma Kiswanjaya</dc:creator><dc:subject>periapical radiography</dc:subject><dc:subject>maxillary incisors</dc:subject><dc:subject>tooth length measurement</dc:subject><dc:subject>radiographic distortion</dc:subject><dc:description xml:lang="en">The prevalence of vertical distortion in the periapical radiograph of the anterior maxillary teeth is quite significant and cingulum is commonly used as the reference of vertical distortion in anterior radiograph. Objective: To evaluate the limit of vertical angulation error that still can be tolerated. Methods: Periapical radiograph with vertical angle 0° was obtained from 30 maxillary incisors as reference, then the vertical angulation was changed into -10°, +10°, -15°, +15°, -20° and +20°. Long axis of the teeth was adjusted parallel to the film. Tooth length and cingulum width with vertical angulation alteration was measured and compared to the actual length. All of the measurement was tested using T test. Results: There were no significant differences between all the measurements of tooth length with the alteration in vertical angulation (p&gt;0.05), whereas cingulum width had a significant difference at +15° and -10°, p&lt;0.05. Conclusion: Tooth length in periapical radiograph of maxillary incisor with parallel position is still tolerable until 20º vertical angle errors. Cingulum width on radiograph with +15º vertical angle alteration is significantly narrowed and on radiograph with -10° vertical angle alteration is significantly widened.</dc:description><dc:publisher>University of Indonesia</dc:publisher><dc:date>2014-12-31</dc:date><dc:type>info:eu-repo/semantics/article</dc:type><dc:identifier>https://doi.org/10.14693/jdi.v21i2.178</dc:identifier><dc:identifier>10.14693/jdi.v21i2.178</dc:identifier><dc:source>Journal of Dentistry Indonesia; Vol 21 No 2 (2014)</dc:source><dc:source>1693-9697</dc:source><dc:source>2355-4800</dc:source><dc:language>en</dc:language><dc:rights>https://creativecommons.org/licenses/by-sa/4.0/</dc:rights></oai_dc:dc>