Melola Discovery

← Melola Discovery

Akses terbuka Jurnal SINTA 1

Comparison of Two Different Intraoral Scanners for Determination of Caries Related Volume Loss in Caries Removal

Journal of Dentistry Indonesia · Vol. 30 No. 2 (2023)

DOI
10.14693/jdi.v30i2.1430
ISSN
1693-9697, 2355-4800
Terbit
2023-08-31
Penerbit
University of Indonesia
Bahasa
en
Lisensi
creativecommons.org/licenses/by-sa/4.0/

Abstrak

Objective: The study aimed to compare cavity volume data obtained with two different intraoral scanners. Methods: One hundred extracted molar teeth were divided into groups according to ICDAS-II classification, and scanned with Cerec Omnicam (Dentsply Sirona) and iTero Element Flex (Align Technology). The caries-infected tissues were removed regarding either minimally invasive or conventional cavity principles. Samples were scanned again and volumetric data were assessed by Meshmixer 3.5 (Autodesk) 3D modeling software. Statistical evaluations were performed with Mann Whitney U test and Spearman’s Correlation test. The significance level was α=0.05. Results: Although there was a significant difference between obtained initial volume readings of two scanners for 3M and 3C groups (p < 0.05), no significant difference was observed among other groups (p ≥ 0.05). Regarding the comparison of final volume readings of two scanners, a significant difference was found for 5M group (p = 0.036), whereas no significant difference was observed for other groups (p ≥ 0.05). Percentage of volume loss between two scanners was statistically similar (p ≥ 0.05). Conclusion: Data obtained with Cerec Omnicam and iTero Element Flex were compatible with volumetric assessments. Both intraoral scanners may be considered effective for calculating caries-related cavity volumes. Minimally invasive cavity principles may provide less volume loss compared to conventional cavity principles.

Kata kunci

Jaringan kolaborasi para penulis

10 penulis · 30 tautan kepenulisan bersama · 17 lintas organisasi

Arahkan kursor atau ketuk sebuah nama untuk menyorot rekan penulisnya. Klik dua kali untuk membuka halaman penulis.

  • Marmara University
  • Istanbul Kent University
  • Istanbul Medipol University
  • Istanbul Health and Technology University
  • Afiliasi tidak diketahui
  • Organisasi berbeda
  • Organisasi sama
  • Afiliasi tidak diketahui
  • Garis lebih tebal = lebih banyak artikel bersama · lingkaran lebih besar = lebih banyak artikel
Tampilkan sebagai tabel
Rekan penulisOrganisasiArtikel bersama
Simge MeşeliMarmara University2
Ünsal Veli ÜstündağIstanbul Medipol University2
Perihan Seda AteşIstanbul Health and Technology University2
İsmail ÜnalMarmara University2
EBRU IŞIK ALTURFANMarmara University2

Afiliasi berasal dari OpenAlex; metadata OAI-PMH jurnal tidak memuatnya. Penulis tanpa ID OpenAlex dicocokkan berdasarkan nama, sehingga dua orang bisa tergabung atau satu orang bisa terpisah.

Sumber metadata: OpenAlex API (jurnal SINTA, ADR 0048) https://openalex.org/S2736430281, pertama di-harvest 19 Nov 2026, terakhir terlihat 19 Nov 2026.
Metadata asli (oai_dc)
<oai_dc:dc xmlns:dc="http://purl.org/dc/elements/1.1/" xmlns:oai_dc="http://www.openarchives.org/OAI/2.0/oai_dc/"><dc:title xml:lang="en">Comparison of Two Different Intraoral Scanners for Determination of Caries Related Volume Loss in Caries Removal</dc:title><dc:creator>Merve Şeker</dc:creator><dc:creator>Elif Alkan</dc:creator><dc:creator>Dilek Arslantunali Tagtekin</dc:creator><dc:creator>Bora Korkut</dc:creator><dc:creator>Funda Yanıkoğlu</dc:creator><dc:subject>intraoral scanners</dc:subject><dc:subject>caries removal</dc:subject><dc:subject>minimally invasive dentistry</dc:subject><dc:subject>extracted molars</dc:subject><dc:subject>CEREC Omnicam</dc:subject><dc:description xml:lang="en">Objective: The study aimed to compare cavity volume data obtained with two different intraoral scanners. Methods: One hundred extracted molar teeth were divided into groups according to ICDAS-II classification, and scanned with Cerec Omnicam (Dentsply Sirona) and iTero Element Flex (Align Technology). The caries-infected tissues were removed regarding either minimally invasive or conventional cavity principles. Samples were scanned again and volumetric data were assessed by Meshmixer 3.5 (Autodesk) 3D modeling software. Statistical evaluations were performed with Mann Whitney U test and Spearman’s Correlation test. The significance level was α=0.05. Results: Although there was a significant difference between obtained initial volume readings of two scanners for 3M and 3C groups (p &lt; 0.05), no significant difference was observed among other groups (p ≥ 0.05). Regarding the comparison of final volume readings of two scanners, a significant difference was found for 5M group (p = 0.036), whereas no significant difference was observed for other groups (p ≥ 0.05). Percentage of volume loss between two scanners was statistically similar (p ≥ 0.05). Conclusion: Data obtained with Cerec Omnicam and iTero Element Flex were compatible with volumetric assessments. Both intraoral scanners may be considered effective for calculating caries-related cavity volumes. Minimally invasive cavity principles may provide less volume loss compared to conventional cavity principles.</dc:description><dc:publisher>University of Indonesia</dc:publisher><dc:date>2023-08-31</dc:date><dc:type>info:eu-repo/semantics/article</dc:type><dc:format>application/pdf</dc:format><dc:identifier>http://dx.doi.org/10.14693/jdi.v30i2.1430</dc:identifier><dc:identifier>10.14693/jdi.v30i2.1430</dc:identifier><dc:source>Journal of Dentistry Indonesia; Vol 30 No 2 (2023)</dc:source><dc:source>1693-9697</dc:source><dc:source>2355-4800</dc:source><dc:language>en</dc:language><dc:relation>https://scholarhub.ui.ac.id/cgi/viewcontent.cgi?article=1430&amp;context=jdi</dc:relation><dc:rights>https://creativecommons.org/licenses/by-sa/4.0/</dc:rights></oai_dc:dc>