Melola Discovery

← Melola Discovery

Jurnal SINTA 1

Kekuatan Rekat Restorasi Komposit Resin pada Permukaan Dentin dengan Sistem Adhesif Self-Etch dalam Berbagai Temperatur

Journal of Dentistry Indonesia · Vol. 15 No. 3 (2008)

DOI
10.14693/jdi.v15i3.34
ISSN
1693-9697, 2355-4800
Terbit
2008-10-14
Penerbit
University of Indonesia
Bahasa
id

Abstrak

Single-step self-etch adhesive systems are the system that combine self etching primer and bonding agent into one step application. This system was developed as the effort to simplified in application prosedures and give a good bond strength of resin composites to dentin surface. The purpose of this study was to examine the bond strength of resin composites with two singlestep self-etch adhesives system (Xeno III and Clearfil Tri-S Bond) to bovine dentin at temperature of adhesive 3ºC, 22ºC and 30ºC. Adhesive was applied to dentin surface (bovine insisivus mandibular dentin) follow by resin composites bonded according to the manufacturer’s instructions. Tensile bond strength of 60 specimens were tested UTM (universal testing machine) after 24 hours storage in aquadest at 37 ºC. The results were analyzed using ANOVA test followed by Tukey’s test (p< 0,05). The bond strength of Xeno III was significantly diffrent from that of Clearfil tri-S Bond, 0,66±0,271, 2,70±1,528, 0,23±0,104 versus 2,07±0,272, 4,77±0,689, 4,39±1,205 MPa at temperature of materials 3ºC, 22ºC and 30ºC respectively. The bond strength of two single- step adhesives system (Xeno III and Clearfil Tri-S Bond) were highest at temperature 22ºC than other temperatures of materials. DOI: 10.14693/jdi.v15i3.34

Kata kunci

Jaringan kolaborasi para penulis

18 penulis · 38 tautan kepenulisan bersama · 4 lintas organisasi

Arahkan kursor atau ketuk sebuah nama untuk menyorot rekan penulisnya. Klik dua kali untuk membuka halaman penulis.

  • University of Indonesia
  • Universitas Syiah Kuala
  • Universitas Trisakti
  • Organisasi berbeda
  • Organisasi sama
  • Afiliasi tidak diketahui
  • Garis lebih tebal = lebih banyak artikel bersama · lingkaran lebih besar = lebih banyak artikel
Tampilkan sebagai tabel
Rekan penulisOrganisasiArtikel bersama
Yosi Kusuma EriwatiUniversity of Indonesia3
Ferry JayaUniversity of Indonesia1
Andi Soufyan SUniversity of Indonesia1
Anton RahardjoUniversity of Indonesia1
Diah Ayu MaharaniUniversity of Indonesia1
KarinaUniversity of Indonesia1
Adini FadhilahUniversity of Indonesia1
Octarina OctarinaUniversitas Trisakti1
Decky Joesiana IndraniUniversity of Indonesia1
M. ErlindaUniversity of Indonesia1
Bambang IrawanUniversity of Indonesia1
Marzia Magdalena TeteleptaUniversity of Indonesia1
Niti MatramUniversity of Indonesia1
A NoerdinUniversity of Indonesia1
Chitra MarianiUniversity of Indonesia1

Afiliasi berasal dari OpenAlex; metadata OAI-PMH jurnal tidak memuatnya. Penulis tanpa ID OpenAlex dicocokkan berdasarkan nama, sehingga dua orang bisa tergabung atau satu orang bisa terpisah.

Sumber metadata: OpenAlex API (jurnal SINTA, ADR 0048) https://openalex.org/S2736430281, pertama di-harvest 19 Nov 2026, terakhir terlihat 19 Nov 2026.
Metadata asli (oai_dc)
<oai_dc:dc xmlns:dc="http://purl.org/dc/elements/1.1/" xmlns:oai_dc="http://www.openarchives.org/OAI/2.0/oai_dc/"><dc:title xml:lang="id">Kekuatan Rekat Restorasi Komposit Resin pada Permukaan Dentin dengan Sistem Adhesif Self-Etch dalam Berbagai Temperatur</dc:title><dc:creator>Iin Sundari</dc:creator><dc:creator>Siti Triaminingsih</dc:creator><dc:creator>Andi Soufyan</dc:creator><dc:subject>self-etch adhesive</dc:subject><dc:subject>dentin bonding</dc:subject><dc:subject>composite resin restorations</dc:subject><dc:subject>bond strength</dc:subject><dc:subject>Xeno III</dc:subject><dc:subject>temperature effects</dc:subject><dc:subject>bovine dentin</dc:subject><dc:subject>tensile bond strength</dc:subject><dc:description xml:lang="id">Single-step self-etch adhesive systems are the system that combine self etching primer and bonding agent into one step application. This system was developed as the effort to simplified in application prosedures and give a good bond strength of resin composites to dentin surface. The purpose of this study was to examine the bond strength of resin composites with two singlestep self-etch adhesives system (Xeno III and Clearfil Tri-S Bond) to bovine dentin at temperature of adhesive 3ºC, 22ºC and 30ºC. Adhesive was applied to dentin surface (bovine insisivus mandibular dentin) follow by resin composites bonded according to the manufacturer’s instructions. Tensile bond strength of 60 specimens were tested UTM (universal testing machine) after 24 hours storage in aquadest at 37 ºC. The results were analyzed using ANOVA test followed by Tukey’s test (p&lt; 0,05). The bond strength of Xeno III was significantly diffrent from that of Clearfil tri-S Bond, 0,66±0,271, 2,70±1,528, 0,23±0,104 versus 2,07±0,272, 4,77±0,689, 4,39±1,205 MPa at temperature of materials 3ºC, 22ºC and 30ºC respectively. The bond strength of two single- step adhesives system (Xeno III and Clearfil Tri-S Bond) were highest at temperature 22ºC than other temperatures of materials. DOI: 10.14693/jdi.v15i3.34</dc:description><dc:publisher>University of Indonesia</dc:publisher><dc:date>2008-10-14</dc:date><dc:type>info:eu-repo/semantics/article</dc:type><dc:identifier>https://doi.org/10.14693/jdi.v15i3.34</dc:identifier><dc:identifier>10.14693/jdi.v15i3.34</dc:identifier><dc:source>Journal of Dentistry Indonesia; Vol 15 No 3 (2008)</dc:source><dc:source>1693-9697</dc:source><dc:source>2355-4800</dc:source><dc:language>id</dc:language></oai_dc:dc>