Melola Discovery

← Melola Discovery

Akses terbuka Jurnal SINTA 1

Microleakage of Resin Composite Restoration with Total-Etch and Self-Etch Systems at Various Curing Distances

Journal of Dentistry Indonesia · Vol. 15 No. 2 (2008)

DOI
10.14693/jdi.v15i2.68
ISSN
1693-9697, 2355-4800
Terbit
2008-08-31
Penerbit
University of Indonesia
Bahasa
en
Lisensi
creativecommons.org/licenses/by/4.0/

Abstrak

Microleakage still occurs between cavity wall and resin composite restoration, although bonding agent such as Total-etch (TE) and Selfetch (SE) systems had been used. One of the causes of microleakage was associated to improper polymerization affected by curing distances. The objective of this study was to evaluate the microleakage of resin composite restoration using TE and SE adhesive systems that were polymerized at various curing distances. A total of 120 human molars were prepared for class V cavity and were divided into 4 groups with bonded resin composite restoration: Group A (TE): Filtek Z350 + Adper Single Bond 2; Group B (TE): Tetric N Ceram + Tetric N Bond; Group C (SE): Clearfil APX + SE Bond; and Group D (SE): Ceram X + Xeno III. Each group were divided into 3 parts (10 teeth each) which were restored at 0; 2 and 4 mm of curing distance respectively. After stored in aquadest at 37oC (24 hours), all specimens were immersed in 1% methylene blue solution (24 hours). Dye penetration at coronal site were observed under a stereomicroscope (Nikon SM 2800). The results showed that microleakage between 3 various curing distances of each group were not significantly different (Kruskall-Wallis test, p>0,05). Mann-Whitney U test (p<0,05) showed that microleakage between Group A-C; Group A-D and Group B-D were significantly different at 2 mm curing distance. Conclusion: microleakage of resin composite restoration with TE adhesive system were lower than SE at all curing distances. DOI: 10.14693/jdi.v15i2.68

Kata kunci

Jaringan kolaborasi para penulis

21 penulis · 43 tautan kepenulisan bersama · 7 lintas organisasi

Arahkan kursor atau ketuk sebuah nama untuk menyorot rekan penulisnya. Klik dua kali untuk membuka halaman penulis.

  • University of Indonesia
  • Universitas Syiah Kuala
  • Universitas Pembangunan Nasional Veteran Jakarta
  • Universitas Trisakti
  • Organisasi berbeda
  • Organisasi sama
  • Afiliasi tidak diketahui
  • Garis lebih tebal = lebih banyak artikel bersama · lingkaran lebih besar = lebih banyak artikel
Tampilkan sebagai tabel
Rekan penulisOrganisasiArtikel bersama
Siti TriaminingsihUniversity of Indonesia2
Andi SoufyanUniversity of Indonesia2
Emil BudiantoUniversity of Indonesia1
Niti MatramUniversity of Indonesia1
Ferry JayaUniversity of Indonesia1
Andi Soufyan SUniversity of Indonesia1
Muhammad DhiaulfikriUniversity of Indonesia1
Ellyza HerdaUniversity of Indonesia1
Cut FauziahUniversitas Pembangunan Nasional Veteran Jakarta1
Sri FitriyaniUniversitas Syiah Kuala1
Anton RahardjoUniversity of Indonesia1
Diah Ayu MaharaniUniversity of Indonesia1
KarinaUniversity of Indonesia1
Adini FadhilahUniversity of Indonesia1
Octarina OctarinaUniversitas Trisakti1
Andy SoufyanUniversity of Indonesia1
Chairunnisa R. R. ChairunnisaUniversity of Indonesia1
M. ErlindaUniversity of Indonesia1

Afiliasi berasal dari OpenAlex; metadata OAI-PMH jurnal tidak memuatnya. Penulis tanpa ID OpenAlex dicocokkan berdasarkan nama, sehingga dua orang bisa tergabung atau satu orang bisa terpisah.

Sumber metadata: OpenAlex API (jurnal SINTA, ADR 0048) https://openalex.org/S2736430281, pertama di-harvest 19 Nov 2026, terakhir terlihat 19 Nov 2026.
Metadata asli (oai_dc)
<oai_dc:dc xmlns:dc="http://purl.org/dc/elements/1.1/" xmlns:oai_dc="http://www.openarchives.org/OAI/2.0/oai_dc/"><dc:title xml:lang="en">Microleakage of Resin Composite Restoration with Total-Etch and Self-Etch Systems at Various Curing Distances</dc:title><dc:creator>Viona Diansari</dc:creator><dc:creator>Yosi Kusuma Eriwati</dc:creator><dc:creator>Decky Joesiana Indrani</dc:creator><dc:subject>microleakage</dc:subject><dc:subject>composite resin restorations</dc:subject><dc:subject>self-etch adhesive</dc:subject><dc:subject>curing distance</dc:subject><dc:subject>polymerization</dc:subject><dc:subject>Class V cavities</dc:subject><dc:subject>methylene blue dye penetration</dc:subject><dc:subject>dental adhesives</dc:subject><dc:description xml:lang="en">Microleakage still occurs between cavity wall and resin composite restoration, although bonding agent such as Total-etch (TE) and Selfetch (SE) systems had been used. One of the causes of microleakage was associated to improper polymerization affected by curing distances. The objective of this study was to evaluate the microleakage of resin composite restoration using TE and SE adhesive systems that were polymerized at various curing distances. A total of 120 human molars were prepared for class V cavity and were divided into 4 groups with bonded resin composite restoration: Group A (TE): Filtek Z350 + Adper Single Bond 2; Group B (TE): Tetric N Ceram + Tetric N Bond; Group C (SE): Clearfil APX + SE Bond; and Group D (SE): Ceram X + Xeno III. Each group were divided into 3 parts (10 teeth each) which were restored at 0; 2 and 4 mm of curing distance respectively. After stored in aquadest at 37oC (24 hours), all specimens were immersed in 1% methylene blue solution (24 hours). Dye penetration at coronal site were observed under a stereomicroscope (Nikon SM 2800). The results showed that microleakage between 3 various curing distances of each group were not significantly different (Kruskall-Wallis test, p&gt;0,05). Mann-Whitney U test (p&lt;0,05) showed that microleakage between Group A-C; Group A-D and Group B-D were significantly different at 2 mm curing distance. Conclusion: microleakage of resin composite restoration with TE adhesive system were lower than SE at all curing distances. DOI: 10.14693/jdi.v15i2.68</dc:description><dc:publisher>University of Indonesia</dc:publisher><dc:date>2008-08-31</dc:date><dc:type>info:eu-repo/semantics/article</dc:type><dc:format>application/pdf</dc:format><dc:identifier>https://doi.org/10.14693/jdi.v15i2.68</dc:identifier><dc:identifier>10.14693/jdi.v15i2.68</dc:identifier><dc:source>Journal of Dentistry Indonesia; Vol 15 No 2 (2008)</dc:source><dc:source>1693-9697</dc:source><dc:source>2355-4800</dc:source><dc:language>en</dc:language><dc:relation>http://www.jdentistry.ui.ac.id/index.php/JDI/article/download/68/61</dc:relation><dc:rights>https://creativecommons.org/licenses/by/4.0/</dc:rights></oai_dc:dc>