Melola Discovery

← Melola Discovery

Akses terbuka Jurnal SINTA 1

Design and Analysis of Trash Monitoring System Prototype Based On Internet of Things (IoT) Using MQTT Protocol

JURNAL INFOTEL · Vol. 10 No. 3 (2018) · hlm. 113–113

DOI
10.20895/infotel.v10i3.381
ISSN
2085-3688, 2460-0997
Terbit
2018-08-28
Penerbit
LPPM Institut Teknologi Telkom Purwokerto
Bahasa
en
Lisensi
creativecommons.org/licenses/by-sa/4.0/

Abstrak

On this research,Internet of Things (IoT) as an advanced technology is used to monitor the height of trash from a trash can in order to give notification whether the height of trash is already reach the maximum limit or not yet.To support those needs,we used NodeMCU as microcontroller,ultrasonic sensor,MQTT as IoT protocol,and also Android application to show the data.After we did the system performance test,we got the biggest result of end-to-end delay which is 2.06875 seconds when the packet delivery is set to 1000 ms with 3 active nodes and the smallest result which is 0.26055 seconds when the packet delivery is set to 100 ms with 1 active mode.The biggest result of throughput is 597.17 Bytes/s when the packet delivery is set to 100 ms with 1 active mode and the smallest result is 75.86 Bytes/s when the packet delivery is set to 1000 ms with 3 active nodes.The biggest result of availability and reliability is 99.905% when the packet delivery is set to 1000 ms and the smallest result is 99.833% when the packet delivery is set to 100 ms.

Kata kunci

Jaringan kolaborasi para penulis

23 penulis · 45 tautan kepenulisan bersama

Arahkan kursor atau ketuk sebuah nama untuk menyorot rekan penulisnya. Klik dua kali untuk membuka halaman penulis.

  • Telkom University
  • Organisasi berbeda
  • Organisasi sama
  • Afiliasi tidak diketahui
  • Garis lebih tebal = lebih banyak artikel bersama · lingkaran lebih besar = lebih banyak artikel
Tampilkan sebagai tabel
Rekan penulisOrganisasiArtikel bersama
Ridha Muldina NegaraTelkom University6
Ratnasih RatnasihTelkom University3
Ana OktavianaTelkom University2
Mulki Nurullah PerbawaTelkom University2
Elsa MustikawatiTelkom University1
Mirdan Syahid Mulya SudrajatTelkom University1
Muhammad Irfan DenatamaTelkom University1
Revan Faredha AswarizaTelkom University1
Ahmad Tsaqib HakimTelkom University1
Arrum Prima DewiTelkom University1
Cyril Nugrahutama KurnamanTelkom University1
Triani WulandariTelkom University1
M. Irfan PratamaTelkom University1
Alfin HikmaturokhmanTelkom University1
Albion Apta ZaimTelkom University1
Ananda IrsyadTelkom University1
Nindy Ayu MarthalianaTelkom University1
Maman AbdurohmanTelkom University1
Aji Gautama PutradaTelkom University1
Hilal Hudan NuhaTelkom University1

Afiliasi berasal dari OpenAlex; metadata OAI-PMH jurnal tidak memuatnya. Penulis tanpa ID OpenAlex dicocokkan berdasarkan nama, sehingga dua orang bisa tergabung atau satu orang bisa terpisah.

Sumber metadata: OpenAlex API (jurnal SINTA, ADR 0048) https://openalex.org/S4210188896, pertama di-harvest 19 Nov 2026, terakhir terlihat 19 Nov 2026.
Metadata asli (oai_dc)
<oai_dc:dc xmlns:dc="http://purl.org/dc/elements/1.1/" xmlns:oai_dc="http://www.openarchives.org/OAI/2.0/oai_dc/"><dc:title xml:lang="en">Design and Analysis of Trash Monitoring System Prototype Based On Internet of Things (IoT) Using MQTT Protocol</dc:title><dc:creator>Achmad Auliyaa Zulfikri</dc:creator><dc:creator>Doan Perdana</dc:creator><dc:creator>Gustommy Bisono</dc:creator><dc:subject>Internet of Things</dc:subject><dc:subject>MQTT protocol</dc:subject><dc:subject>NodeMCU</dc:subject><dc:subject>ultrasonic sensors</dc:subject><dc:subject>Android application</dc:subject><dc:subject>end-to-end delay</dc:subject><dc:subject>throughput</dc:subject><dc:subject>packet delivery</dc:subject><dc:subject>reliability and availability</dc:subject><dc:subject>notification system</dc:subject><dc:description xml:lang="en">On this research,Internet of Things (IoT) as an advanced technology is used to monitor the height of trash from a trash can in order to give notification whether the height of trash is already reach the maximum limit or not yet.To support those needs,we used NodeMCU as microcontroller,ultrasonic sensor,MQTT as IoT protocol,and also Android application to show the data.After we did the system performance test,we got the biggest result of end-to-end delay which is 2.06875 seconds when the packet delivery is set to 1000 ms with 3 active nodes and the smallest result which is 0.26055 seconds when the packet delivery is set to 100 ms with 1 active mode.The biggest result of throughput is 597.17 Bytes/s when the packet delivery is set to 100 ms with 1 active mode and the smallest result is 75.86 Bytes/s when the packet delivery is set to 1000 ms with 3 active nodes.The biggest result of availability and reliability is 99.905% when the packet delivery is set to 1000 ms and the smallest result is 99.833% when the packet delivery is set to 100 ms.</dc:description><dc:publisher>LPPM Institut Teknologi Telkom Purwokerto</dc:publisher><dc:date>2018-08-28</dc:date><dc:type>info:eu-repo/semantics/article</dc:type><dc:format>application/pdf</dc:format><dc:identifier>https://doi.org/10.20895/infotel.v10i3.381</dc:identifier><dc:identifier>10.20895/infotel.v10i3.381</dc:identifier><dc:source>JURNAL INFOTEL; Vol 10 No 3 (2018); 113-113</dc:source><dc:source>2085-3688</dc:source><dc:source>2460-0997</dc:source><dc:language>en</dc:language><dc:relation>https://ejournal.st3telkom.ac.id/index.php/infotel/article/download/381/233</dc:relation><dc:rights>https://creativecommons.org/licenses/by-sa/4.0/</dc:rights></oai_dc:dc>