Melola Discovery

← Melola Discovery

Akses terbuka Jurnal SINTA 1

Speed Control of an Electrical Cable Extrusion Process Using Artificial Intelligence-Based Technique

Jurnal Nasional Teknik Elektro (2023)

DOI
10.25077/jnte.v12n1.1045.2023
ISSN
2302-2949, 2407-7267
Terbit
2023-03-31
Penerbit
Andalas University
Bahasa
en
Lisensi
creativecommons.org/licenses/by-nc-sa/4.0/

Abstrak

Most cable manufacturing companies use Programmable Logic Controllers with conventional controllers to control line speed during cable extrusion. These traditional controllers have difficulties keeping the line speed constant, causing surface defects on the extruded cables and affecting the quality of the manufactured cables. To overcome these challenges, data on the causes of defects during cable manufacturing were collected from a cable manufacturing company in Ghana to ascertain the possible causes during cable manufacturing. Adaptive Neuro-Fuzzy Inference System (ANFIS) controller was designed to provide a constant line speed during the cable extrusion process. To ascertain its robustness, the ANFIS controller was compared to a conventional Proportional Integral Derivative controller and a Fuzzy Logic controller. The controllers were designed and simulated using MATLAB/Simulink software. The analysis of the collected data indicated that a break in insulation/ sheath was a frequently occurring defect during the cable manufacturing process due to improper line speed control of the machines used in the cable manufacturing process. Based on the results obtained from the various controllers, it was concluded that the ANFIS controller was robust in achieving stability regarding line speed variations.

Kata kunci

Jaringan kolaborasi para penulis

19 penulis · 29 tautan kepenulisan bersama · 15 lintas organisasi

Arahkan kursor atau ketuk sebuah nama untuk menyorot rekan penulisnya. Klik dua kali untuk membuka halaman penulis.

  • University of Mines and Technology
  • Jiangsu University
  • Ashesi University
  • Auckland University of Technology
  • Kwame Nkrumah University of Science and Technology
  • Jomo Kenyatta University of Agriculture and Technology
  • Afiliasi tidak diketahui
  • Organisasi berbeda
  • Organisasi sama
  • Afiliasi tidak diketahui
  • Garis lebih tebal = lebih banyak artikel bersama · lingkaran lebih besar = lebih banyak artikel
Tampilkan sebagai tabel
Rekan penulisOrganisasiArtikel bersama
Awingot Richard AkpariboAshesi University1
Charles OforiAuckland University of Technology1
Ernest Atsu AmetepeUniversity of Mines and Technology1
Francis Boafo EffahKwame Nkrumah University of Science and Technology1
William Duodu AsiheneUniversity of Mines and Technology1
Benjamin OdoiUniversity of Mines and Technology1
Daniel Fosu BoatengUniversity of Mines and Technology1
Asaph Mbugua MuhiaJomo Kenyatta University of Agriculture and Technology1
Mununi FuseiniUniversity of Mines and Technology1
Ernest Quaye Nii AtuquayeUniversity of Mines and Technology1
Francis HusinuAfiliasi tidak diketahui1
Kumi Manel FionaUniversity of Mines and Technology1
Philip BlewushieUniversity of Mines and Technology1
Cyril Yao AtatsiUniversity of Mines and Technology1
Laud Christian AinooUniversity of Mines and Technology1

Afiliasi berasal dari OpenAlex; metadata OAI-PMH jurnal tidak memuatnya. Penulis tanpa ID OpenAlex dicocokkan berdasarkan nama, sehingga dua orang bisa tergabung atau satu orang bisa terpisah.

Sumber metadata: OpenAlex API (jurnal SINTA, ADR 0048) https://openalex.org/S4210175326, pertama di-harvest 20 Nov 2026, terakhir terlihat 20 Nov 2026.
Metadata asli (oai_dc)
<oai_dc:dc xmlns:dc="http://purl.org/dc/elements/1.1/" xmlns:oai_dc="http://www.openarchives.org/OAI/2.0/oai_dc/"><dc:title xml:lang="en">Speed Control of an Electrical Cable Extrusion Process Using Artificial Intelligence-Based Technique</dc:title><dc:creator>Robert Agyare Ofosu</dc:creator><dc:creator>Erwin Normanyo</dc:creator><dc:creator>N-Yo Abdul-Aziz</dc:creator><dc:creator>Stephen Smart Stickings</dc:creator><dc:subject>cable extrusion</dc:subject><dc:subject>adaptive neuro-fuzzy inference system</dc:subject><dc:subject>PID controller</dc:subject><dc:subject>fuzzy logic controller</dc:subject><dc:subject>surface defects</dc:subject><dc:subject>controller robustness</dc:subject><dc:description xml:lang="en">Most cable manufacturing companies use Programmable Logic Controllers with conventional controllers to control line speed during cable extrusion. These traditional controllers have difficulties keeping the line speed constant, causing surface defects on the extruded cables and affecting the quality of the manufactured cables. To overcome these challenges, data on the causes of defects during cable manufacturing were collected from a cable manufacturing company in Ghana to ascertain the possible causes during cable manufacturing. Adaptive Neuro-Fuzzy Inference System (ANFIS) controller was designed to provide a constant line speed during the cable extrusion process. To ascertain its robustness, the ANFIS controller was compared to a conventional Proportional Integral Derivative controller and a Fuzzy Logic controller. The controllers were designed and simulated using MATLAB/Simulink software. The analysis of the collected data indicated that a break in insulation/ sheath was a frequently occurring defect during the cable manufacturing process due to improper line speed control of the machines used in the cable manufacturing process. Based on the results obtained from the various controllers, it was concluded that the ANFIS controller was robust in achieving stability regarding line speed variations.</dc:description><dc:publisher>Andalas University</dc:publisher><dc:date>2023-03-31</dc:date><dc:type>info:eu-repo/semantics/article</dc:type><dc:format>application/pdf</dc:format><dc:identifier>https://doi.org/10.25077/jnte.v12n1.1045.2023</dc:identifier><dc:identifier>10.25077/jnte.v12n1.1045.2023</dc:identifier><dc:source>Jurnal Nasional Teknik Elektro; (2023)</dc:source><dc:source>2302-2949</dc:source><dc:source>2407-7267</dc:source><dc:language>en</dc:language><dc:relation>http://jnte.ft.unand.ac.id/index.php/jnte/article/download/1045/478</dc:relation><dc:rights>https://creativecommons.org/licenses/by-nc-sa/4.0/</dc:rights></oai_dc:dc>