Melola Discovery

← Melola Discovery

Akses terbuka Jurnal SINTA 1

Shrimp Pond Monitoring System using Cooperative Wireless Sensor Network Multi-Hop Technique based on Internet of Things

Jurnal Nasional Teknik Elektro (2023) · hlm. 56–63

DOI
10.25077/jnte.v12n3.1133.2023
ISSN
2302-2949, 2407-7267
Terbit
2023-12-13
Penerbit
Andalas University
Bahasa
en
Lisensi
creativecommons.org/licenses/by-nc-sa/4.0/

Abstrak

Water quality is a crucial factor in maintaining the survival and growth of shrimp. Manual water quality monitoring in shrimp ponds is no longer effective due to the need for periodic monitoring to maintain stable water quality. Therefore, online monitoring using various sensors installed in each pond is necessary. However, there are several challenges to overcome, such as the large expanse of the shrimp ponds, which may lead to data loss due to signal disruptions, and limited energy to power the sensors. To address these issues, this paper proposes the cooperative Wireless Sensor Network (WSN) technique with a multi-hop method for communication in the monitoring process. The system consists of five sensor nodes: temperature sensor, pH sensor, water level sensor, intake water flow sensor, and drain water flow sensor. The cooperative WSN multi-hop technique helps reduce energy consumption in the sensor nodes during measurement and data transmission, while also preventing data packet loss. This is achieved through the use of relay nodes that strengthen signals and forward data to the sink node. As a result, the battery life is extended, and energy usage in the monitoring process can be optimized. The system enables real-time online monitoring and can be accessed through a smartphone application. The results of this study show that the total energy consumption for data transmission in the sensor nodes is 9.64 J, while the total energy consumption for data forwarding in the relay nodes is 9.15 J. The total energy consumption in the transmit and receive processes is 18.79 J or 5.2 mWh. Therefore, it can be concluded that the energy savings of the proposed system is 4.3 mWh or approximately 45%, and is more efficient than the previous system.

Kata kunci

Jaringan kolaborasi para penulis

22 penulis · 42 tautan kepenulisan bersama · 9 lintas organisasi

Arahkan kursor atau ketuk sebuah nama untuk menyorot rekan penulisnya. Klik dua kali untuk membuka halaman penulis.

  • Universitas Syiah Kuala
  • Universitas Islam Negeri Ar-Raniry
  • Osaka City University
  • Lambung Mangkurat University
  • Malikussaleh University
  • Afiliasi tidak diketahui
  • Organisasi berbeda
  • Organisasi sama
  • Afiliasi tidak diketahui
  • Garis lebih tebal = lebih banyak artikel bersama · lingkaran lebih besar = lebih banyak artikel
Tampilkan sebagai tabel
Rekan penulisOrganisasiArtikel bersama
Yunida YunidaUniversitas Syiah Kuala3
Khairul MunadiUniversitas Syiah Kuala2
Tarmizi TarmiziUniversitas Syiah Kuala2
Tetsuo TsujiokaOsaka City University1
Muhammad MizwarUniversitas Syiah Kuala1
Bachtiar BachtiarLambung Mangkurat University1
Tarmizi TarmiziUniversitas Syiah Kuala1
Muhazir IsUniversitas Syiah Kuala1
Ahmad FauziUniversitas Syiah Kuala1
TarmiziUniversitas Syiah Kuala1
Yuwaldi AwayUniversitas Syiah Kuala1
Asri Muhammad JalilAfiliasi tidak diketahui1
Ira Devi SaraUniversitas Syiah Kuala1
Saifuddin Muhammad JalilMalikussaleh University1
Muhammad Farhan HaikalUniversitas Syiah Kuala1
Roslidar RoslidarUniversitas Syiah Kuala1
Syahrial SyahrialUniversitas Syiah Kuala1
Muhammad Khalis FikriUniversitas Syiah Kuala1

Afiliasi berasal dari OpenAlex; metadata OAI-PMH jurnal tidak memuatnya. Penulis tanpa ID OpenAlex dicocokkan berdasarkan nama, sehingga dua orang bisa tergabung atau satu orang bisa terpisah.

Sumber metadata: OpenAlex API (jurnal SINTA, ADR 0048) https://openalex.org/S4210175326, pertama di-harvest 20 Nov 2026, terakhir terlihat 20 Nov 2026.
Metadata asli (oai_dc)
<oai_dc:dc xmlns:dc="http://purl.org/dc/elements/1.1/" xmlns:oai_dc="http://www.openarchives.org/OAI/2.0/oai_dc/"><dc:title xml:lang="en">Shrimp Pond Monitoring System using Cooperative Wireless Sensor Network Multi-Hop Technique based on Internet of Things</dc:title><dc:creator>Zickri Zickri</dc:creator><dc:creator>Andri Novandri</dc:creator><dc:creator>Ramzi Adriman</dc:creator><dc:creator>Nasaruddin Nasaruddin</dc:creator><dc:subject>multi-hop communication</dc:subject><dc:subject>Internet of Things</dc:subject><dc:subject>water quality monitoring</dc:subject><dc:subject>energy consumption reduction</dc:subject><dc:subject>relay nodes</dc:subject><dc:subject>packet loss</dc:subject><dc:subject>mobile application</dc:subject><dc:subject>aquaculture</dc:subject><dc:description xml:lang="en">Water quality is a crucial factor in maintaining the survival and growth of shrimp. Manual water quality monitoring in shrimp ponds is no longer effective due to the need for periodic monitoring to maintain stable water quality. Therefore, online monitoring using various sensors installed in each pond is necessary. However, there are several challenges to overcome, such as the large expanse of the shrimp ponds, which may lead to data loss due to signal disruptions, and limited energy to power the sensors. To address these issues, this paper proposes the cooperative Wireless Sensor Network (WSN) technique with a multi-hop method for communication in the monitoring process. The system consists of five sensor nodes: temperature sensor, pH sensor, water level sensor, intake water flow sensor, and drain water flow sensor. The cooperative WSN multi-hop technique helps reduce energy consumption in the sensor nodes during measurement and data transmission, while also preventing data packet loss. This is achieved through the use of relay nodes that strengthen signals and forward data to the sink node. As a result, the battery life is extended, and energy usage in the monitoring process can be optimized. The system enables real-time online monitoring and can be accessed through a smartphone application. The results of this study show that the total energy consumption for data transmission in the sensor nodes is 9.64 J, while the total energy consumption for data forwarding in the relay nodes is 9.15 J. The total energy consumption in the transmit and receive processes is 18.79 J or 5.2 mWh. Therefore, it can be concluded that the energy savings of the proposed system is 4.3 mWh or approximately 45%, and is more efficient than the previous system.</dc:description><dc:publisher>Andalas University</dc:publisher><dc:date>2023-12-13</dc:date><dc:type>info:eu-repo/semantics/article</dc:type><dc:format>application/pdf</dc:format><dc:identifier>http://dx.doi.org/10.25077/jnte.v12n3.1133.2023</dc:identifier><dc:identifier>10.25077/jnte.v12n3.1133.2023</dc:identifier><dc:source>Jurnal Nasional Teknik Elektro; (2023); 56-63</dc:source><dc:source>2302-2949</dc:source><dc:source>2407-7267</dc:source><dc:language>en</dc:language><dc:relation>http://jnte.ft.unand.ac.id/index.php/jnte/article/download/1133/504</dc:relation><dc:rights>https://creativecommons.org/licenses/by-nc-sa/4.0/</dc:rights></oai_dc:dc>